[mhakim]

Narker, on 2007-02-13 06:59, said:

I got in my phone with FAR and was able to copy the files to the desired directory, but after I take out the battery for a few seconds and put it back in, there are no new camera drivers, audio drivers, or themes apparent, although they are indeed in the Flash section of my phone.

• is your customize.xml already enable the flash?
  
• have you copy *.swf to /tpa/preset/system/desktop/flash
  
• have you copy *.thm into your theme folder in you memory stick and please make sure that the theme.xml in *.thm already pointed to use flash menu in /tpa/preset/system/desktop/flash

[dshiu]

very nice tut ty very much

i got rid of my walkman hissing sound and other static noise

btw i got 2 questions...

1) which ones the best camera driver for w810i? cuz i tried the zuna driver and i dont really notice any difference

2) if i have previously installed a custom audio driver but now i wanna change to a different audio driver, how do i remove the old one?

This post has been edited by dshiu: 13 February 2007 - 12:17 AM

[koao]

There hasnt been a mod for adding standby clock available when standby?

[nasse_]

j

This post has been edited by nasse_: 13 February 2007 - 12:57 AM

[the_unforgiven_1988]

[*]Get XS++ and a MAIN firmware, download here:
XS++ v1.2
W810_R4EA031_MAIN_GENERIC_HN_RED49 or mirror
[/quote]

hey can some one please uploade this file in another site rather than this site and rapidshare i have some problem with this sites thnkx

[deejay6901]

hi

i tried to run xs++ and also flash main firmware by loading w810_p3k_dcu.49R.ssw.it got the following results:
see attached. when i try to click stop button it says my phone might get unusable but on the progress bar it says 100%
and this is the result from log:" loaders\db2010_cid49red_flash_r2a003.bin...
10:29:55| This is a FLASH loader
10:29:55| +++ Now flashing firmware main...
10:29:55| Sending flashfile C:\deejay\Downloads\db2010cid49_4_alpha.rar\w810_p3k_dcu.49R.ssw
10:29:55| 5 flashblocks
10:29:59| Finishing flash"

so my question is.. is it safe to click stop button without damaging my phone? please help me out on this. need your expert advise, as im still not removing my phone up to this time. Thanx

[deejay6901]

hi

i tried to run xs++ and also flash main firmware by loading w810_p3k_dcu.49R.ssw.it got the following results:
see attached. when i try to click stop button it says my phone might get unusable but on the progress bar it says 100%
and this is the result from log:" loaders\db2010_cid49red_flash_r2a003.bin...
10:29:55| This is a FLASH loader
10:29:55| +++ Now flashing firmware main...
10:29:55| Sending flashfile C:\deejay\Downloads\db2010cid49_4_alpha.rar\w810_p3k_dcu.49R.ssw
10:29:55| 5 flashblocks
10:29:59| Finishing flash"

so my question is.. is it safe to click stop button without damaging my phone? please help me out on this. need your expert advise, as im still not removing my phone up to this time. Thanx

[igi_master]

pisanggoreng, on 2007-01-27 22:43, said:

for all ye n00bs:

HowTo customize your w810 without bruteforcing

Customizing with FAR+SEFP:
[*]Open FARmanager, and press F11
[*]Choose SEFP plugin

• If you get the error: "Unknown exception", Exception address: 0x7C812A5B...... The plugin will be Unloaded!
  This is a bug. It's because you don't have any COM-ports, so create a fake COM-port connection. I did it with my BT Dongle.
  
• if you get the error: "<BIldr> can be used with Service Cable ONLY".... browse to the SEFP folder and patch sefp.dll with sefp0.10.0.51patch.exe.

I've got this error
1. I dont have any bluetooth dongle
2. how to patch sefp.ddl?

what can I do? Help me please

Thank you

This post has been edited by igi_master: 13 February 2007 - 03:48 AM

[mhakim]

deejay6901, on 2007-02-13 09:55, said:

hi

i tried to run xs++ and also flash main firmware by loading w810_p3k_dcu.49R.ssw.it got the following results:
see attached. when i try to click stop button it says my phone might get unusable but on the progress bar it says 100%
and this is the result from log:" loaders\db2010_cid49red_flash_r2a003.bin...
10:29:55| This is a FLASH loader
10:29:55| +++ Now flashing firmware main...
10:29:55| Sending flashfile C:\deejay\Downloads\db2010cid49_4_alpha.rar\w810_p3k_dcu.49R.ssw
10:29:55| 5 flashblocks
10:29:59| Finishing flash"

so my question is.. is it safe to click stop button without damaging my phone? please help me out on this. need your expert advise, as im still not removing my phone up to this time. Thanx xs__.jpg

you're not reading the entire thread bro.

someone and I have told you guys here that this is BUG, you can remove your phone when it already writen "Finishing Flash" but remember, just for w810_p3k_dcu.49R.ssw.

[deejay6901]

Hi

Sorry... i tried to check the previous posts here. and yes after i unplug my phone. i cant seem to turn on my phone back, so i guess it got bricked!!! but after i reapply W810_R4EA031_MAIN_GENERIC_HN_RED49. My phone got resurrected.. geez, i really got scared that time.

finally when i try to run FAR, i cant seem to open FS, coz ive got these error
"if you get the error: "<BIldr> can be used with Service Cable ONLY".... "

i tried to apply the patch and its still the same. cant open FS. can you please help me on this? really appreciate all your efforts here guys and im very flattered....

hope for your reply again..

mhakim, on 2007-02-13 15:34, said:

you're not reading the entire thread bro.

someone and I have told you guys here that this is BUG, you can remove your phone when it already writen "Finishing Flash" but remember, just for w810_p3k_dcu.49R.ssw.

[mhakim]

deejay6901, on 2007-02-13 15:21, said:

Hi

Sorry... i tried to check the previous posts here. and yes after i unplug my phone. i cant seem to turn on my phone back, so i guess it got bricked!!! but after i reapply W810_R4EA031_MAIN_GENERIC_HN_RED49. My phone got resurrected.. geez, i really got scared that time.

finally when i try to run FAR, i cant seem to open FS, coz ive got these error
"if you get the error: "<BIldr> can be used with Service Cable ONLY".... "

i tried to apply the patch and its still the same. cant open FS. can you please help me on this? really appreciate all your efforts here guys and im very flattered....

hope for your reply again..

Find this file sefp0.10.0.51patch.exe in folder \Far\SEFP\. Run it. Then Try to remove ur SIM, and MemoryStick. After that, put your batries back.

Run Far, press F11, select SEFP 0.10.0.50, make sure that you have selected the right connection options, then select "Enter The Matrix"

Press "C" button, connect your phone to USB cable, wait until the windows show you FLASH & FS folder. Don't release your "C" button before see those folder (FLASH & FS).

Goodluck.

[deejay6901]

Hello

Ive done that already, and i saw FS and Flash folder. however after clicking on the FS i got the error which says, it can only use service cable im really confused.. and i was able to apply the patch... hmm.. i wonder what is still the problem with this. please help. Thanks..

by the way sorry for being such a noob as this is my 2nd phone already, i bricked my phone before(k750) so im very extra careful with this phone this time...

regards...

mhakim, on 2007-02-13 17:00, said:

Find this file sefp0.10.0.51patch.exe in folder \Far\SEFP\. Run it. Then Try to remove ur SIM, and MemoryStick. After that, put your batries back.

Run Far, press F11, select SEFP 0.10.0.50, make sure that you have selected the right connection options, then select "Enter The Matrix"

Press "C" button, connect your phone to USB cable, wait until the windows show you FLASH & FS folder. Don't release your "C" button before see those folder (FLASH & FS).

Goodluck.

[mhakim]

deejay6901, on 2007-02-13 16:09, said:

Hello

Ive done that already, and i saw FS and Flash folder. however after clicking on the FS i got the error which says, it can only use service cable im really confused.. and i was able to apply the patch... hmm.. i wonder what is still the problem with this. please help. Thanks..

by the way sorry for being such a noob as this is my 2nd phone already, i bricked my phone before(k750) so im very extra careful with this phone this time...

regards...

plese make sure that you're using newest plugins + patch and didn't lost the connection between your phone + USB + computer.

try to not put the phone when you release the "C" button when entering the \FS\ folder.

[deejay6901]

mhakim, on 2007-02-13 17:48, said:

plese make sure that you're using newest plugins + patch and didn't lost the connection between your phone + USB + computer.

try to not put the phone when you release the "C" button when entering the \FS\ folder.

hi again

i guess there is no problem bout my connection... btw here is what im getting when i run FAR..



im sure ive followed the instructions well, but still got this error. oh btw need to clear some things here..

1. when using xs++ at first, according to this thread, you have to flash first your main using this
"w810_p3k_dcu.49R.ssw" for breakin access...
question: when i apply this, my phone got brick and wont turn on (do i have to run FAR at this point now? coz when i try running it, it still wont load FS
solution: reapply W810_R4EA031_MAIN_GENERIC_HN_RED49, after this, all went fine again(phone back to normal)
2. if the first step ive done went successful, will it supposed to turn the phone on?
3. lastly, could you please post some cool drivers here (acoustics, camdriver) and also some flash theme files?

Thanks and sorry for me being so stupid...

SE-NSE Rulezzzz....

[xcow]

this is a china main firmware from topsony

http://www.megaupload.com/?d=AD8JAUAA

[razvang17]

mhakim, on 2007-02-12 12:51, said:

from what program that this error shown?

1e0w is under the software menu (>*<<*<*)

the log file is located in the FS, under: tpa/preset

[pisanggoreng]

deejay6901, on 2007-02-13 11:10, said:

hi again

i guess there is no problem bout my connection... btw here is what im getting when i run FAR..

im sure ive followed the instructions well, but still got this error. oh btw need to clear some things here..

1. when using xs++ at first, according to this thread, you have to flash first your main using this
"w810_p3k_dcu.49R.ssw" for breakin access...
question: when i apply this, my phone got brick and wont turn on (do i have to run FAR at this point now? coz when i try running it, it still wont load FS
solution: reapply W810_R4EA031_MAIN_GENERIC_HN_RED49, after this, all went fine again(phone back to normal)
2. if the first step ive done went successful, will it supposed to turn the phone on?
3. lastly, could you please post some cool drivers here (acoustics, camdriver) and also some flash theme files?

Thanks and sorry for me being so stupid...

SE-NSE Rulezzzz....

you got the service cable error. Patch it with the patch sefp0.10.0.51patch.exe
after flashing the breakloader your phone won't work. this is no real MAIN fw but only a breakloader, to get access to the filesystem.
drivers can be found in the 3rd post.

This post has been edited by pisanggoreng: 13 February 2007 - 12:07 PM

[xcow]

im sry to bother you guys, but do u guys have the original STARTUP_SOUND_SEMC.mp3? cause after i changed it to my mp3 file, it doesnt play =( and my file is only like 2-3 seconds long

thx =p

[the_unforgiven_1988]

HEY GUYS I FLASH MINE WITH china main firmware still when i open far the phone starts what is the problem

[shahrulyangmulia]

Hi.
i want to customize my phone. from what i understand, i need to flash my main with the temporary main, do the customization, and flash back to the real main.

my erom is cid49 brown. can i use this technique?

sorry for my bad english.

This post has been edited by shahrulyangmulia: 13 February 2007 - 05:28 PM