[zookee]

Hi guys!

I really need a guru's help.

I was following the steps of the first post and I got 'till step 13 . I copied to the phone some flash files [to the right place, ofcource], acoustic [audio driver] and a new menu. And after all this copied on the phone FAR crashed.
So I couldnt make it thru steps 14-18.
First I tried to re-do step 13 in FAR [like nothing happened] but it gave me an error message if I try to enter FLASH dir:
"Script flash_mode execution error!
Error code: 0" [close]

Both FLASH and FS apear empty [!!!]

I tried to continue.. finished all the remaining steps, reasembled my phone, turned it on and discovered that my phone's menu IS MISSING!

When I wanted to access my phones menu I got this message:
"Menu corrupt, please contact your provider" I dont remember it well. The message was about calling the phone-provider for help [in plain].
So.. no menu.
Walkman worked fine, thou.

After this I tried to flash my phone with the unbranding tutorial. Same story with FAR.. same message, phone still f*cked up.

And after all that I hooked up my phone with the SE Update Service [I thought maybe it'll just put everything back], but it couldnt make anything [phone recognition failed].

Now I cant even turn the phone up..

And it's really late, I cant think anymore and I'm worried sick.

Please help me fix it.
Or at least give me a hint.

Thanks in advance,
Atila

PHONE INFO
DBID: db2010
OTP CID: 49
EROM CID: 49
EROM color: Red
IMEI: 35233701xxxxxx
Phone: W810
Operator: S_E_EUROPE
CDA: CDA102295/7 R2A
Firmware: R4ED001
EROM: n/a

XS++ [v1.2] still "reads" him as:
02:18:40| PORT STATUS: ACTIVE
02:18:41| Baseband ID: 8040
02:18:41| Hardware Platform: db2010 Marita compact
02:18:41| Protocol Version: 3.1
02:18:41| Sending loaders\db2010_cid00_prodid_p3k.bin...
02:18:41| This is a PRODUCTION_ID loader
02:18:41| Activating GDFS...
02:18:42| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W810)
02:18:42| ...using GDFS name
02:18:42| ++++++++++++++++++++++++++++++++++
02:18:42| PHONE INFO
02:18:42| ++++++++++++++++++++++++++++++++++
02:18:42| DBID: db2010
02:18:42| OTP CID: 49
02:18:42| EROM CID: 49
02:18:42| EROM color: Red
02:18:42| IMEI: 35233701xxxxxx
02:18:42| Phone: W810
02:18:42| Operator: S_E_EUROPE
02:18:42| CDA: CDA102295/7 R2A
02:18:42| Firmware: R4ED001
02:18:42| EROM: n/a
02:18:42| ++++++++++++++++++++++++++++++++++
02:18:42| Ready for operation!
02:19:10| +++ Sendinging shutdown signal to phone...
02:19:10| +++ Done.. You may now connect again...
02:19:10| Shutting down...

This post has been edited by zookee: 06 February 2007 - 01:19 AM

[phirewerkz]

Hello there,

I'm trying to follow the steps on the guide above, but once I have connected the phone and try to enter FS/, it shows a bunch of stuff, but freezes on:

Hello: COMPACTPRODUCTION_ID_LOADER P3K rom version by den po

My phone is a W300i, and I have followed all the steps correctly (flashed main with w300_p3k_dcu.49R.ssw using phoneXS, etc..)

Any ideas?

This post has been edited by phirewerkz: 06 February 2007 - 01:20 AM

[ikjadoon]

zookee, on 2007-02-05 20:15, said:

Hi guys!

I really need a guru's help.

I was following the steps of the first post and I got 'till step 13 . I copied to the phone some flash files [to the right place, ofcource], acoustic [audio driver] and a new menu. And after all this copied on the phone FAR crashed.
So I couldnt make it thru steps 14-18.
First I tried to re-do step 13 in FAR [like nothing happened] but it gave me an error message if I try to enter FLASH dir:
"Script flash_mode execution error!
Error code: 0" [close]

Both FLASH and FS apear empty [!!!]

I tried to continue.. finished all the remaining steps, reasembled my phone, turned it on and discovered that my phone's menu IS MISSING!

When I wanted to access my phones menu I got this message:
"Menu corrupt, please contact your provider" I dont remember it well. The message was about calling the phone-provider for help [in plain].
So.. no menu.
Walkman worked fine, thou.

After this I tried to flash my phone with the unbranding tutorial. Same story with FAR.. same message, phone still f*cked up.

And after all that I hooked up my phone with the SE Update Service [I thought maybe it'll just put everything back], but it couldnt make anything [phone recognition failed].

Now I cant even turn the phone up..

And it's really late, I cant think anymore and I'm worried sick.

Please help me fix it.
Or at least give me a hint.

Thanks in advance,
Atila

PHONE INFO
DBID: db2010
OTP CID: 49
EROM CID: 49
EROM color: Red
IMEI: 35233701xxxxxx
Phone: W810
Operator: S_E_EUROPE
CDA: CDA102295/7 R2A
Firmware: R4ED001
EROM: n/a

XS++ [v1.2] still "reads" him as:
02:18:40| PORT STATUS: ACTIVE
02:18:41| Baseband ID: 8040
02:18:41| Hardware Platform: db2010 Marita compact
02:18:41| Protocol Version: 3.1
02:18:41| Sending loaders\db2010_cid00_prodid_p3k.bin...
02:18:41| This is a PRODUCTION_ID loader
02:18:41| Activating GDFS...
02:18:42| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W810)
02:18:42| ...using GDFS name
02:18:42| ++++++++++++++++++++++++++++++++++
02:18:42| PHONE INFO
02:18:42| ++++++++++++++++++++++++++++++++++
02:18:42| DBID: db2010
02:18:42| OTP CID: 49
02:18:42| EROM CID: 49
02:18:42| EROM color: Red
02:18:42| IMEI: 35233701xxxxxx
02:18:42| Phone: W810
02:18:42| Operator: S_E_EUROPE
02:18:42| CDA: CDA102295/7 R2A
02:18:42| Firmware: R4ED001
02:18:42| EROM: n/a
02:18:42| ++++++++++++++++++++++++++++++++++
02:18:42| Ready for operation!
02:19:10| +++ Sendinging shutdown signal to phone...
02:19:10| +++ Done.. You may now connect again...
02:19:10| Shutting down...

Have you tried flashing it completely with FAR? Like copying the custompack and such?

~Ibrahim~

P.S. To the dude with the News Reader question, follow this tutorial to remove phone-embedded games and to get the .jar files of games already on the phone:

http://myforum.lasyk...ead.php?t=30474

[Ohhira3]

SOMEONE KNOWS WHAT´S THE PATH TO ERASE THE APLICATION "NEWS READER" ??? in w810

Thanks,,, folks...

This post has been edited by Ohhira3: 06 February 2007 - 01:33 AM

[pisanggoreng]

Ohhira3, on 2007-02-06 02:29, said:

SOMEONE KNOWS WHAT´S THE PATH TO ERASE THE APLICATION "NEWS READER" ??? in w810

Thanks,,, folks...

/tpa/preset/default/java

This post has been edited by pisanggoreng: 06 February 2007 - 01:39 AM

[zookee]

ikjadoon, on 2007-02-06 02:25, said:

Have you tried flashing it completely with FAR? Like copying the custompack and such?

~Ibrahim~

As I said, FAR gives me an error message. Besides, I just want the original files back + the flash files + new sound driver.. nothing more [the new menu is not important if I'll have new flash menus].

And I dont know how to flash [completely] the mobile with FAR...

Pleaseee, someone help, my phone is still "broken"

[zookee]

When I want to enter the main menu I get this message:
"DynamicMenuError

Configuration error.
Please contact your network operator or service center."

Please help.

[kenniy]

strelica, on 2007-02-05 19:02, said:

you have to install USBFLASH drivers
read this
http://www.topsony.c...rivers_USBFlash

ok...i'll give it a try as soon as i can..thanks for the tip!

[kenniy]

strelica, on 2007-02-05 19:02, said:

you have to install USBFLASH drivers
read this
http://www.topsony.c...rivers_USBFlash

one more thing...hw do i extract the file..mean after extracting the .rar file, i have a .mbn file.hw do i extract that, or how do i work with that??

[P-Unit87]

Hey. I dont know whats going on. My phone is not turning on. I Cant get the this far manager to work like the way you guys tell in the tutorial. Please help me. My phone is not turning on. I need help immediately.

[SmellULater]

hello all im new to this but iv flashed the w300i now and my w810i, i got a few questions, whats the best sound driver for my w810i so its loud on headphones but still sounds crisp and clear, i tryed a new one and its lower than the original :|, can i unlock the w300i with this method somehow? thanks in advance much appreciated!

[Willyy1991]

i gotta tell you guys...
im so happy that this worked, if i want to mod my phone i just do it like this
it worked 100%
with dutch software if someonme likes to know and man im so happy:D
thank you very much for this tutorial!

[Dhart11]

I need help immidiatly i tried this and after i got done with the PhoneXS++ main first, i try and connect it to FAR but i am able to get past the point of holding C and connecting the cable but i cant get it to boot.

my phone will not even turn on now i need help to remedy this.

[dgk]

Dhart11, on 2007-02-06 21:53, said:

I need help immidiatly i tried this and after i got done with the PhoneXS++ main first, i try and connect it to FAR but i am able to get past the point of holding C and connecting the cable but i cant get it to boot.

my phone will not even turn on now i need help to remedy this.

Try reinstalling firmware with SEUS.

I had similar problem, and it helped.

[JurassicPunk]

I currently have an unbranded phone... Or at least I think it is. I have the default working flash menus.. It has Russian Arabic Hebrew and more languages on it which I don't want to loose.

If I only want to change the sound/camera and add some flash menus - Which firmware should I use? How can I know if the languages will stop working? As far as I know from Xs++ I have R4DB005 firmware on it (Attached jpg of info).

Can someone help me choose which FS/Main I need so I won't loose what I have right now?


 info.JPG (74.14K)
Number of downloads: 65

[carlosreddragon]

Hey friends; I have a little problem with a W810, when I try to have access to the FS, Far manager gets stuck at sending byte , and it just doesn't do anything else, so I can´t do anything; but, the problem is that I need to finalize the Phone, and I haven't been able to, and Phone Xs doesn't work either, after some time the phone just turn on; the thing is, I used to do the Far and the Phone Xs process before and I had no trouble, but now I can't do it anymore; any suggestions??? help??? Thanks in advance!!!

This isan image of where Far gets stuck at:




Greetings from Colombia!!!

Atte: Carlos Figueroa.

This post has been edited by carlosreddragon: 06 February 2007 - 11:27 PM

[pisanggoreng]

carlosreddragon, on 2007-02-07 00:16, said:

Hey friends; I have a little problem with a W810, when I try to have access to the FS, Far manager gets stuck at sending byte , and it just doesn't do anything else, so I can´t do anything; but, the problem is that I need to finalize the Phone, and I haven't been able to, and Phone Xs doesn't work either, after some time the phone just turn on; the thing is, I used to do the Far and the Phone Xs process before and I had no trouble, but now I can't do it anymore; any suggestions??? help??? Thanks in advance!!!

i really cant read it. try ALT-prtscreen.

did you patch sefp.dll?
did you choose the right bootscript?

This post has been edited by pisanggoreng: 06 February 2007 - 11:37 PM

[carlosreddragon]

pisanggoreng, on 2007-02-06 23:21, said:

i really cant read it. try ALT-prtscreen.

did you patch sefp.dll?
did you choose the right bootscript?

Ok, I already edited my previous post, have a look, and tell me if you can see it now; on the other hand; what do you mean by patching the sefp.dll??? are you talking about the sefp010051??? coz, I already use that version; and, about the bootsrcript, I always choose w300_w810_z550_cid49, is there any other I can choose??? thanks for your help.

Greetings from Colombia!!!

Atte: Carlos Figueroa.

[pisanggoreng]

carlosreddragon, on 2007-02-07 00:33, said:

Ok, I already edited my previous post, have a look, and tell me if you can see it now; on the other hand; what do you mean by patching the sefp.dll??? are you talking about the sefp010051??? coz, I already use that version; and, about the bootsrcript, I always choose w300_w810_z550_cid49, is there any other I can choose??? thanks for your help.

Greetings from Colombia!!!

Atte: Carlos Figueroa.

okay, yeah there's some patch you can try..

did you eject your battery, after you flashed breakloader 100% ?

Try flashing breakloader again and eject battery for 30secs, then connect with SEFP

This post has been edited by pisanggoreng: 06 February 2007 - 11:36 PM

[bboyredcel]

I dont get how to do this and i keep getting an error... error code:0

"install SEFP plugin (first SEFP v01004, then SEFP v010051 over it)"


can someone give me the step-by-step?


thanks!