[afghanjohnny]

Nicely done, we really need a R3A005 erom... So my guess that CID51 was anti-brute was right.

[mobilemodman]

hey all, was customizing the file system on my w810 from the china pack to the europe one, however it seems that my phone is stuck in an eternal loop, its still going, any suggestions??, dont want to stop the process as it may leed to firmware coruption!

14:02:12| ++++++++++++++++++++++++++++++++++
14:02:12| Turn off phone
14:02:12| Hold C Button on phone and connect phone.
14:02:12| You have 30 seconds.
14:02:12| ++++++++++++++++++++++++++++++++++
14:02:19| PORT STATUS: ACTIVE
14:02:19| Baseband ID: 8040
14:02:19| Hardware Platform: db2010 Marita compact
14:02:19| Protocol Version: 3.1
14:02:19| Sending loaders\db2010_cid00_prodid_p3k.bin...
14:02:19| This is a PRODUCTION_ID loader
14:02:19| Activating GDFS...
14:02:20| phone name detected
14:02:20| ++++++++++++++++++++++++++++++++++
14:02:20| PHONE INFO
14:02:20| ++++++++++++++++++++++++++++++++++
14:02:20| DBID: db2010
14:02:20| OTP CID: 49
14:02:20| EROM CID: 49
14:02:20| EROM color: Red
14:02:20| IMEI: 35906400xxxxxx
14:02:20| Phone: W810
14:02:20| Operator: APAC
14:02:20| CDA: CDA102555/101 R2A
14:02:20| Firmware: R4ED001
14:02:20| EROM: n/a
14:02:20| ++++++++++++++++++++++++++++++++++
14:02:20| Ready for operation!
14:05:25| +++ Sending CS_LOADER...
14:05:25| Sending loaders\db2010_cid49red_cs_r5a.bin...
14:05:27| This is a CHIPSELECT loader
14:05:27| Activating loader...
14:05:27| Activating GDFS...
14:05:44| Checking if loader is unlocked...
14:05:44| This loader is LOCKED (errorcode=30)
14:05:44| ***** Auth startup (cmd 05-50)
14:05:44| ***** AuthA (cmd 05-42) hacking
14:05:58| Try #1000 and counting...
14:06:12| Try #2000 and counting...
14:06:26| Try #3000 and counting...
14:06:40| Try #4000 and counting...
14:06:43| ...4201
14:06:43| Matches: 0:0003936, 1:000263, 2:0002, 3:0
14:06:43| Totals : 0:0003936, 1:000263, 2:0002, 3:0
14:06:43| Theory : 0:0003938, 1:000261, 2:0001, 3:0
14:06:43| ***** Reset (cmd 01-0C)
14:06:43| Waiting for the phone to disconnect
14:06:43| Waiting for the phone to reconnect
14:06:46| Baseband ID: 8040
14:06:46| Hardware Platform: db2010 Marita compact
14:06:46| Protocol Version: 3.1
14:06:46| ***** Sending PRODUCTION_ID LOADER
14:06:46| Sending loaders\db2010_cid00_prodid_p3k.bin...
14:06:46| This is a PRODUCTION_ID loader
14:06:47| +++ Sending CS_LOADER...
14:06:47| Sending loaders\db2010_cid49red_cs_r5a.bin...
14:06:49| This is a CHIPSELECT loader
14:06:49| Activating loader...
14:06:49| Activating GDFS...
14:07:06| Checking if loader is unlocked...
14:07:06| This loader is LOCKED (errorcode=30)
14:07:06| ***** Auth startup (cmd 05-50)
14:07:06| ***** AuthA (cmd 05-42) hacking
14:07:20| Try #1000 and counting...
14:07:34| Try #2000 and counting...
14:07:48| Try #3000 and counting...
14:08:02| Try #4000 and counting...
14:08:05| ...4201
14:08:05| Matches: 0:0003952, 1:000249, 2:0000, 3:0
14:08:05| Totals : 0:0007888, 1:000512, 2:0002, 3:0
14:08:05| Theory : 0:0007876, 1:000523, 2:0002, 3:0
14:08:05| ***** Reset (cmd 01-0C)
14:08:05| Waiting for the phone to disconnect
14:08:05| Waiting for the phone to reconnect
14:08:08| Baseband ID: 8040
14:08:08| Hardware Platform: db2010 Marita compact
14:08:08| Protocol Version: 3.1
14:08:08| ***** Sending PRODUCTION_ID LOADER
14:08:08| Sending loaders\db2010_cid00_prodid_p3k.bin...
14:08:09| This is a PRODUCTION_ID loader
14:08:09| +++ Sending CS_LOADER...
14:08:09| Sending loaders\db2010_cid49red_cs_r5a.bin...
14:08:11| This is a CHIPSELECT loader
14:08:11| Activating loader...
14:08:11| Activating GDFS...
14:08:28| Checking if loader is unlocked...
14:08:28| This loader is LOCKED (errorcode=30)

. . . and continues again, please help before i run out of battery

This post has been edited by mobilemodman: 10 January 2007 - 08:08 AM

[Vizzpv]

as you can see w810 is being worked by the crew .

[Manos]

Congratulations for all involved in this wonderful project. But when R3A005 support is going to be available, because ot lot of phones are with this EROM and thus they can't use the best part of XS++ funcions - FS access

[dubhagat]

mine the process has stuck at this point
http://img201.images...ntitled1nm6.jpg
what should i do now
thanks

Update: i tried the whole thing again and its stuck at same place once more
http://img345.images...ntitled1gs5.jpg
am trying it on w700i cid 49 red using phone xs 2 alpha 6
and am trying to intall flash menus

i tried new xs++ released today but it always hangs on restarting phone state

read of people having similar problems and they managed to get it to work with old 2.01 beta version so am trying it out now

anything i am missing out
please help me with this

This post has been edited by dubhagat: 10 January 2007 - 08:45 AM

[sunfire7]

amazing, you guys rocks!!, I can't wait for the R3A005 EROM support, do you thing is possible the file system access (breaking) in the future? i ment, how possible?, I am so happy with phone xs/xs++!!!

La ayuda economica que puedes donar, es para la pagina se-nse? o para el equipo phone xs, xs++?
o como se podria compensar / donar a los desarrolladores de este magico programa...?

This post has been edited by sunfire7: 10 January 2007 - 07:50 AM

[moseschrist]

trying to use fsx on brown phone ( k750 cid 49 erom r3a005) but it is stuck on firmware activation.

forgot one thing

great work you have done here...
keep it up

and one other thing...
the first two times i tried using this, the information on the left side didn't show... it was a blank white square.
and profile phone didn't work on my phone even tough phone profiler does work. and the program sees my phone as w800 (i wish) instead of k750.

This post has been edited by moseschrist: 10 January 2007 - 08:33 AM

[kondronaute]

wonderfull guys, you are the best, thank you

[kondronaute]

wonderfull guys, you are the best, thank you

[harry23419]

gr8 work.....but brown fones dont get well supported......the next version will contain support for all r3a erom fones nd brown fones?
still very disappointed with w810 locked loader....

[romulocarlos]

giorgix.m, on 2007-01-09 19:18, said:

And what about english? My eyes burn everytime I try to read that sms style writing...

For me too.
No everyone is English expert... hehe..

dubhagat, on 2007-01-09 20:04, said:

mine the process has stuck at this point
http://img201.images...ntitled1nm6.jpg
what should i do now
thanks

They are working on it, I think... No one knows why this happens.
I suggest change USB port (use one on the back). But is a "try and error" method.

sethdev, on 2007-01-10 01:50, said:

does not work for my K750i Cid49 Brown.
and hang at this point.

Brown phones are not supported yet...

mobilemodman, on 2007-01-10 02:22, said:

hey all, was customizing the file system on my w810 from the china pack to the europe one, however it seems that my phone is stuck in an eternal loop, its still going, any suggestions??, dont want to stop the process as it may leed to firmware coruption!
. . . and continues again, please help before i run out of battery

Don't try to flash W810... it is NOT supported, see first post!

@Developers
On first post, you can write a remark about RED and BROWN phones, will make easy to understand BROWN is not supported, I think.... and remark the issue about W810 in bold, red color.

@All

Let's try to not mess this thread... Instead copy and past XS++ log, just attach it on your post... Just click "File..." button below your message, and pick the log file.

Good luck for all!

This post has been edited by romulocarlos: 10 January 2007 - 09:39 AM

[ahwee]

Hi,
I have a K800 CID51. Below is my log. Does it mean i can start customizing my phone?
I am new to customization, if i want to change my SMS font size, what should i do exactly? Thanks in advance.

17:30:37| Turn off phone
17:30:37| Hold C Button on phone and connect phone.
17:30:37| You have 30 seconds.
17:30:37| ++++++++++++++++++++++++++++++++++
17:30:53| PORT STATUS: ACTIVE
17:30:53| Baseband ID: 9900
17:30:53| Hardware Platform: db2020
17:30:53| Protocol Version: 3.1
17:30:53| phone name detected
17:30:53| ++++++++++++++++++++++++++++++++++
17:30:53| PHONE INFO
17:30:53| ++++++++++++++++++++++++++++++++++
17:30:53| DBID: db2020
17:30:53| OTP CID: 49
17:30:53| EROM CID: 51
17:30:53| EROM color: Red
17:30:53| IMEI: 35399601xxxxxx
17:30:53| Phone: K800
17:30:53| Operator: APAC
17:30:53| CDA: CDA102568/101 R5A
17:30:53| Firmware: R1GB001
17:30:53| EROM: R3A016
17:30:54| ++++++++++++++++++++++++++++++++++
17:30:54| Ready for operation!
17:34:58| Sending loaders\db2020_cid01_cert_p3g.bin...
17:34:58| This is a CERTIFICATE loader
17:34:58| Sending loaders\db2020_cid51red_flash_r2a005.bin...
17:34:58| This is a FLASH loader
17:34:58| +++ Sendinging shutdown signal to phone...
17:34:58| +++ Done.. You may now connect again...
17:34:58| Shutting down...

[jagheterfredrik]

Only support for CID51 main-firmware flashing!
We're certainly looking at the FS Activaton-hang.

This post has been edited by jagheterfredrik: 10 January 2007 - 10:01 AM

[eXoR]

ok i tested CID51 FSX again... it runs 9 Hours but no success (battery empty)

[kust]

eXoR, on 2007-01-10 13:06, said:

ok i tested CID51 FSX again... it runs 9 Hours but no success (battery empty)

FSX don't work for CID51 in this version. You can only flash Main part. Closely read first post

Quote

vDB2020
- Flashing (CID49 and CID51)
- Debranding (CID49)
- Customization (Through bruteforce, CID49)
- Custom filesystem-operations (Through bruteforce, CID49)

Information
- Note! DB2020 CID51, do not flash filesystem-flashes.

[eXoR]

kust, on 2007-01-10 12:15, said:

FSX don't work for CID51 in this version. You can only flash Main part. Closely read first post

oops...
sorry he edited his post i don't saw this!

#edit:
i tried to flahs my phone with XS++ (K800i CID51) with K800_R1ED001_MAIN_GENERIC_WI_RED49

12:57:27| Ready for operation!
12:57:30| Sending loaders\db2020_cid01_cert_p3g.bin...
12:57:31| This is a CERTIFICATE loader
12:57:31| Sending loaders\db2020_cid51red_flash_r2a005.bin...
12:57:31| This is a FLASH loader
12:57:31| +++ Now flashing firmware main...
12:57:31| Sending flashfile C:\Dokumente und Einstellungen\eXoR\Desktop\phonexs\Firmware\K800\K800_R1ED001_MAIN_GENERIC_WI_RED49.mbn
12:57:31| 455 flashblocks
12:57:31| Binary acknowledge failed with: 89
12:57:31| Failed
12:57:31| Binary acknowledge failed with: 68
12:57:31| Failed sending datachunk
12:57:31| Failed sending flashblock 1. Returnvalue 0x3FFFFFF
12:57:31| Done flashing
12:57:31| ++ Flashing was successful

and nothing happens

This post has been edited by eXoR: 10 January 2007 - 11:59 AM

[_Sensible]

@exor

When you say "Running" was the program hacking or did it fail at chalenge X?

Also, you can only flash CID51 firmware with a CID51 flashloader...

This post has been edited by gbrooks3: 10 January 2007 - 12:01 PM

[eXoR]

ok.. i cant flash a CID51 Firmware with a CID46 Firmware?

edit:

Quote

When you say "Running" was the program hacking or did it fail at chalenge X?

what do you mean with this question exactly, sorry my english is bad, i'm german

This post has been edited by eXoR: 10 January 2007 - 12:09 PM

[_Sensible]

No, you cannot flash a CID51 phone with CID49 firmware...it is rejected

You said said the program was running, but didnt get any success?

What do you mean by running? Did it fail or just keep hacking?

P.S. Your english is very good.

[eXoR]

If i want to flash my phone, XS++ says that the flash was successful, but it didn't change anything (due to CID49 fw)
This night i tried finitialize my phone but it just keeps brute forcing until the battery is empty!

This post has been edited by eXoR: 10 January 2007 - 12:46 PM