[tnt2k03]

jagheterfredrik, on 2006-12-24 03:19, said:

The W810 APAC firmwares are the largest DB2010 flashes which means that they have the highest number of blocks. But if you apply a patch, you'll need a header with more blocks than there is in the original file. So I'll look around, but it will be hard to find i think.

Thanks jagheterfredrik. I appreciate your help.

Sincerely,

TNT

[konrad.55]

I'm trying to write FS to my phone (K750i cid 49) and PhoneXS displays only:

[...]
Send Header
Binary answer is: 0f (A9)
Binary acknowledge failed with: 15
Failed
Sending data


and nothing happens

when I write MAIN and FS then only write Main and phone xs it sais ... "finishing flash"

I use Tutorial from post#1

[zuzu_zuzu]

ikjadoon, on 2006-12-23 22:14, said:

Hi, TNT. I don't have a solution for your problem, sorry. On the contrary, I need something from you. Do you have the R4EA031 FS file? Sorry, just wondering!

If you do have it, I could flash my phone and maybe recreate the problem...

~Ibrahim~

if it is finished, then why when i turn on the phone and chose "start phone" it says to me "configuration error, please contact your operator" .... please give me exactly links of what i should download and if can someone has the patience to explain me more of what i have to do ... i will remain [dunno how to say in english ] thanks in advance mate`s.

[konrad.55]

we dont have to choose customize file system??

[dumbrella]

Just wondering, if we flash just the main, will you retain the stuff already on the phone? I have currently, r1ca021 on my k750i, which was updated by seus. Can i just flash the main with my current fs, which is the same (eu_1) as my main i downloaded off topsony

On another note, how long should it take to apply 3 patches with gslide? it's been going for about 10 minutes now...

thanks

[dumbrella]

well, that was a waste of good adrenaline... works perfectly! this is GREAT! thanks so much jagheterfredrik!! :)

[vellkan]

Hello
I have some question: GSlide can only upgrade Flash file with patches, yeah ?
So, when I would like to change my menu I must use Phone XS and wait 5,7 or 11 hours ? Or I can upgrade firmware with GSlide and upload this files (files) to my K750i ??

[Robbyuk]

konrad.55, on 2006-12-24 05:42, said:

I'm trying to write FS to my phone (K750i cid 49) and PhoneXS displays only:

[...]
Send Header
Binary answer is: 0f (A9)
Binary acknowledge failed with: 15
Failed
Sending data
and nothing happens

when I write MAIN and FS then only write Main and phone xs it sais ... "finishing flash"

I use Tutorial from post#1

You Need to make sure you put the filesystem through Gslide ! , i had this error before putting the filesystem through gslide

Thnks

[konrad.55]

I dont understand. I need flash FS??
I have Main + FS in folder with GSlide

This post has been edited by konrad.55: 24 December 2006 - 12:38 PM

[Robbyuk]

konrad.55, on 2006-12-24 12:29, said:

I dont understand. I need flash FS??

Send the filesystem that you want to flash through gslide "dont apply any patches " just call that FSslide.bin or something like that , Then flash , Make sure u have the correct customize files in the Memstick/cust folder !

You need to do the same that you did to the main Firmware ! but this time dont apply patches !

This post has been edited by Robbyuk: 24 December 2006 - 12:40 PM

[konrad.55]

ok this work !!!!!!

[jagheterfredrik]

I'm sorry, i'm going to include FS-sliding in the tutorial, can't believe i didn't do that. Maybe later, but it's Christmas eve Merry Christmas!

[pasxal]

i cant make this work,when i flash the flash file moded by gslider my phone crashes and it shows me contact with a sevice center.what i do wrong?

[jagheterfredrik]

That is either because
1) You didn't patch correctly.
or
2) You haven't moved the correct files to the correct location on the memory card.

[pasxal]

i did exactly what u say in the guide

This post has been edited by pasxal: 24 December 2006 - 01:31 PM

[Robbyuk]

Yeh im afraid its xmas eve and fred cant fit it all in , Did u add the files on your mem card as MEMstick/custom/*all files here *"not in folders"

This post has been edited by Robbyuk: 24 December 2006 - 02:15 PM

[tnt2k03]

Robbyuk, on 2006-12-24 12:39, said:

Send the filesystem that you want to flash through gslide "dont apply any patches " just call that FSslide.bin or something like that , Then flash , Make sure u have the correct customize files in the Memstick/cust folder !

You need to do the same that you did to the main Firmware ! but this time dont apply patches !

How do you send filesystem through gslide? There are three boxes in Gslide. The top one is for your firmware, the second box is for the header file, and the third one is where you add finalization patches. Could you please explain how you send fs file through Gslide. Thanks

Best Regards,

TNT

[Robbyuk]

@ jagheterfredrik

God its hard to tell these peeps what to do isnt it ! i dont know how u keep up with us all

tnt2k03, on 2006-12-24 14:02, said:

How do you send filesystem through gslide? There are three boxes in Gslide. The top one is for your firmware, the second box is for the header file, and the third one is where you add finalization patches. Could you please explain how you send fs file through Gslide. Thanks

Best Regards,

TNT

Hey , Use the top box as you would if it was a firmware ;-) Then as the output use FSslide or sumit thats how i did it , Then u flash your modded filesystem / modded firmware hope it helps !

[berki1]

So that's super. To all thanks.
I am reshaped in Gslide FS set with language version EMEA 2 and then am him cause Phone- X record to the phone and everything is how shall I be. Phone is in my language and largely reports like W800i.
To all much thank you behind crack work and I wish handsome Christmas and much presents. Apart large thanks "jagheterfredrik", that is of ideal those cogitations. Thanks to you.

[pasxal]

Robbyuk, on 2006-12-24 16:00, said:

Yeh im afraid its xmas eve and fred cant fit it all in , Did u add the files on your mem card as MEMstick/cust/*all files here *"not in folders"

not tpa/preset/custon(all files)?