Ok so I followed the guide (my phone was previously unresponsive and would only turn on to a white screen then go blank). When I was in the process of connection it up to XS++ my phone suddenly turned on for the first time in ages, I also recently charge the battery with the new charger that I had just got because the old one blew a capacitor. So now my phone works but it keeps freezing and the only buttons I can press are the power off one or the shortcut key and I can go to the main menu or anything although I can create a new shortcut :\. Also my USB wire seems to be a bit iffy and when I pluh it in it keeps disconnecting and connection repeatedly even when I am not touching the phone or the wire. I tried to flash it again, pushing hard to hopefully keep it connected (I think the connection might be loose). My k750i is CID36 but the firmware I'm trying to put on is 49, is that a problem? I included the log below
16:19:38| XS++ v1.2 Ready !
16:19:43| Attempting to open the interface...
16:19:43| ++++++++++++++++++++++++++++++++++
16:19:43| Turn off phone
16:19:43| Hold C Button on phone and connect phone.
16:19:43| You have 30 seconds.
16:19:43| ++++++++++++++++++++++++++++++++++
16:20:05| PORT STATUS: ACTIVE
16:20:05| Baseband ID: 8040
16:20:05| Hardware Platform: db2010 Marita compact
16:20:05| Protocol Version: 3.1
16:20:05| Sending loaders\db2010_cid00_prodid_p3k.bin...
16:20:05| This is a PRODUCTION_ID loader
16:20:05| Activating GDFS...
16:20:06| phone name detected
16:20:06| +++ Restarting phone - please wait...
16:20:06| ++++++++++++++++++++++++++++++++++
16:20:06| Disconnect phone from USB-port and wait for
16:20:06| further instructions.
16:20:06| You have 8 seconds.
16:20:06| ++++++++++++++++++++++++++++++++++
16:20:14| Open the battery-cover and reinsert the battery.
16:20:14| Hold C Button on phone and connect phone again.
16:20:14| You have 30 seconds.
16:20:14| ++++++++++++++++++++++++++++++++++
16:20:25| Baseband ID: 8040
16:20:25| Hardware Platform: db2010 Marita compact
16:20:25| Protocol Version: 3.1
16:20:25| +++ Phone has restarted successfully...
16:20:25| ++++++++++++++++++++++++++++++++++
16:20:25| PHONE INFO
16:20:25| ++++++++++++++++++++++++++++++++++
16:20:25| DBID: db2010
16:20:25| OTP CID: 36
16:20:25| EROM CID: 36
16:20:25| EROM color: Brown
16:20:25| IMEI: 35655400xxxxxx
16:20:25| Phone: K750
16:20:25| Operator: CHINESE
16:20:25| CDA: CDA102338/36 R5A
16:20:25| Firmware: R1N035
16:20:25| EROM: n/a
16:20:25| ++++++++++++++++++++++++++++++++++
16:20:25| Ready for operation!
16:20:45| Sending loaders\db2010_cid00_prodid_r2f.bin...
16:20:45| This is a PRODUCTION_ID loader
16:20:45| Sending loaders\db2010_cid00_cert_r2e.bin...
16:20:45| This is a CERTIFICATE loader
16:20:45| Breaking in...
16:20:45| Waiting for breakin hello...
16:20:45| Sending loaders\db2010_cid36red_flash_r2ab.bin...
16:20:46| This is a FLASH loader
16:20:46| +++ Now flashing firmware main...
16:20:46| Sending flashfile C:\Documents and Settings\Xing\Desktop\GSlide15\main.bin
16:20:46| 291 flashblocks
16:20:46| Binary acknowledge failed with: 15
16:20:46| Failed
16:21:01| +++ Sendinging shutdown signal to phone...
16:21:03| Shutting down...
edit: read the thread on XS++ and trying it again now.
ok ignore me CID 36 with 49 doesn't work also XS++ doesn't work on brown phones so what now? :|
This post has been edited by koston88: 17 February 2007 - 06:54 AM