[Manos]

Could somebody explain why the FS has to be slided too?

[Robbyuk]

Manos, on 2006-12-24 17:31, said:

Could somebody explain why the FS has to be slided too?

Because the Header in The Filsystem Will Say CID36 , The Loader will reject this ! , so the slider changes this to the correct data / Checksums , i Think this is a breif way of explaining it !

kujinho, on 2006-12-24 17:30, said:

Yeah cheers mate!

I thought I had copied everything over to the memory stick but ah well. What else can I do with this beast now, can I copy over camera drivers?

Merry Xmas ho ho ho

Yes u can if u want to wait for the filesystem to be hacked, in phone Xs , but yeh if ur willing to wait u can !

[Manos]

Yeah, thanks for the answer. But could you explain what you mean by loader? And is that the answer why I can't break in the newly flashed FS for more than 30 hours yet?

[Robbyuk]

Manos, on 2006-12-24 17:44, said:

Yeah, thanks for the answer. But could you explain what you mean by loader? And is that the answer why I can't break in the newly flashed FS for more than 30 hours yet?

The Loader is Normally Refered to as A Bootloader , This Is The First Thing Thats is booted When the fone is switched on , This Loader Will do A Checksum of the current Firmware ! And Fs if these do Not Match the one in the bootloader The fone will refuse to boot , all the slider does is add the correct checksums , Thats what i think is correct , it changes the header to match that of one of a CID 49 Firmware ! .... Yes while we Are running a CID49 firmware / Filesystem there is currently no Bootloader that will allow acess to the filesystem ,


Hope This is correct , Can Sum1 Back me up or tell me if ive made a mistake

Thansk Rob

[jagheterfredrik]

Loaders are small programs that you send to the phone to make it do stuff.
When you hold "C" the phone starts and waits for you to send a loader to it. Lets say that You want to flash, then you send in a flashloader ( a program that waits for you to send the firmware flash) and writes that to the memory.

[Robbyuk]

jagheterfredrik, on 2006-12-24 17:51, said:

Loaders are small programs that you send to the phone to make it do stuff.
When you hold "C" the phone starts and waits for you to send a loader to it. Lets say that You want to flash, then you send in a flashloader ( a program that waits for you to send the firmware flash) and writes that to the memory.

What part will do a checksum on a firmware then ? is it the loader ? or doesnt it use checksums ?


Does Gslide change the firmwares header to match one of say a CID49 firmware?

This post has been edited by Robbyuk: 24 December 2006 - 05:54 PM

[Manos]

But my phone is working, it boots and everything seems to be OK. The problem is when I use Phone-XS to upload some stuff - it just couldn't break. I've been trying for two days now and with no success. Used both Phone-XS and Phone-XC.

[ikjadoon]

Hey, Happy X-Mas eve, every1!

So, I tried the R4DB001 patch last night on my MAIN only. When I tried to turn my phone on, it didn't turn on. I didn't try sliding the FS, as well, though, but it didn't work for TNT, probably won't work for me, but I can try.

Last few questions: Does the memory stick need to inserted when I am flashing with PhoneXS?

Isn't this a bit wrong?

afghanjohnny said:

This is the patch that will change /tpa/preset/custom to your memorycard! Lets you flash FS files and customize without bruteforcing or breakin to the phone! No more waiting for PhoneXS!

Shouldn't it read "memorycard! Lets you customize without bruteforcing or...." I thought the change_custom_folder patch only let you mess around with your custom pack. Aren't we using PhoneXS to upload the FS file?

~Ibrahim~

P.S. TNT: Click reply. Below the area where you type your message, there is an area called "File Attachments". Click browse, upload the FS .zip file (you can't upload the folder), and click add this attachment...Thanks!

This post has been edited by ikjadoon: 24 December 2006 - 06:19 PM

[Robbyuk]

ikjadoon, on 2006-12-24 18:12, said:

Hey, Happy X-Mas eve, every1!

So, I tried the R4DB001 patch last night on my MAIN only. When I tried to turn my phone on, it didn't turn on. I didn't try sliding the FS, as well, though, but it didn't work for TNT, probably won't work for me, but I can try.

Last few questions: Does the memory stick need to inserted when I am flashing with PhoneXS?

Isn't this a bit wrong?
Shouldn't it read "memorycard! Lets you customize without bruteforcing or...." I thought the change_custom_folder patch only let you mess around with your custom pack. Aren't we using PhoneXS to upload the FS file?

~Ibrahim~

as Fred Has Sed Above do Not Try Flash a w810! , The loader is not the same as R2B , Even thou gslide allows you to slide w810 firmware u can not flash it !

Yes You can flash a FS In 10 mins with this guide ! The Customization files go on the memcard so no bruteforcing !

This post has been edited by Robbyuk: 24 December 2006 - 06:21 PM

[ikjadoon]

Robbyuk, on 2006-12-24 13:20, said:

as Fred Has Sed Above do Not Try Flash a w810! , The loader is not the same as R2B , Even thou gslide allows you to slide w810 firmware u can not flash it !

Yes You can flash a FS In 10 mins with this guide ! The Customization files go on the memcard so no bruteforcing !

Kick-ass. I can wait for when we can use the P5B loader. Thanks again!

~Ibrahim~

[RotatingFan]

My Package is a TMOB INT C. Does that mean I can not flash the FS (since there are no "TMOB INT C" flash packages). And does that also mean that I cannot use any Custom Packages, because there are no packages corresponding to my original FS package on my brown phone?

This post has been edited by RotatingFan: 24 December 2006 - 09:17 PM

[tnt2k03]

ikjadoon, on 2006-12-24 18:12, said:

Hey, Happy X-Mas eve, every1!

So, I tried the R4DB001 patch last night on my MAIN only. When I tried to turn my phone on, it didn't turn on. I didn't try sliding the FS, as well, though, but it didn't work for TNT, probably won't work for me, but I can try.

Last few questions: Does the memory stick need to inserted when I am flashing with PhoneXS?

Isn't this a bit wrong?
Shouldn't it read "memorycard! Lets you customize without bruteforcing or...." I thought the change_custom_folder patch only let you mess around with your custom pack. Aren't we using PhoneXS to upload the FS file?

~Ibrahim~

P.S. TNT: Click reply. Below the area where you type your message, there is an area called "File Attachments". Click browse, upload the FS .zip file (you can't upload the folder), and click add this attachment...Thanks!

Here it is.

Merry Christmas.

TNT

[ikjadoon]

tnt2k03, on 2006-12-24 13:57, said:

Here it is.

Merry Christmas.

TNT

Eh, I don't think it uploaded...You clicked "Add This Attachment" and then clicked Add Reply? Let me write some better instructions:

1. Click Reply to this message.
2. Click "Browse"



3. Find the .zip file and press upload.
4. Click "Add This Attachment".



5. Now click "Add Reply" after it has been attached.

It should work now. Merry Christmas to you, as well! Thanks!

~Ibrahim~

[Lemming]

Thanks for this great guide!


*pinned*

[tnt2k03]

ikjadoon, on 2006-12-24 19:25, said:

Eh, I don't think it uploaded...You clicked "Add This Attachment" and then clicked Add Reply? Let me write some better instructions:

1. Click Reply to this message.
2. Click "Browse"



3. Find the .zip file and press upload.
4. Click "Add This Attachment".



5. Now click "Add Reply" after it has been attached.

It should work now. Merry Christmas to you, as well! Thanks!

~Ibrahim~

I sent again.

Merry Christmas

TNT

[ikjadoon]

tnt2k03, on 2006-12-24 19:26, said:

I sent again.

Merry Christmas

TNT

Hmm...It isn't coming up. Below your post it would say attached files..Crap, I don't know..What about Rapid Share? That would probably be best. If you can't, that is OK. I can get it from you later. Happy Christmas!

~Ibrahim~

[rezvideo]

Hi
I've a k750 cid49 R1BC002.
Can I change my k750 to w800 with this program.
please help me
thank u

[zuzu_zuzu]

Robbyuk, on 2006-12-24 14:45, said:

Basicly It depends on what error he is getting if it is a customize error then he didnt patch the FW right or he did not place the customize files in the right place Gl anyway , Tell me exactly whats wrong and ill try to help out

So, i`ve read the tutorial exactly, i've downloaded the corect files, [ W800_R1BC002_MAIN_EU_EMEA and W800_R1BC002_FS_EU4 and w800_r1bc002_change_custom_folder and (first link from the link that was gaved in the first page of the tutorial) and for the custom pack, customization i've tryed with more than one file, because when i enter the >*<<*<* menu on the phone the CDA from there is 102338/23so i've chosed a k750 customization, just that i don't know if it was the right one] i've made with glslide the new Main Firmware, i've connected the phone to the usb cable, that was already plugged to the computer and made a new folder in the root of the memory stick [ \custom ] and after that i copyed the "tpa" folder there. i've turned the phone off, and i tooked the SIM out, put the battery back, opened the Phone XS, presses Start, configured with USB connection, biggest speed from that list, and chosed K750 CID 49 from there. Pressed the Flash Menu, and selected the Main Firmware that i've made, selected the W800_R1BC002_FS_EU4 for the FS, checked the first 2 boxes from a total of three, pressed the C button from the phone, inserted the USB cable and pressed FLASH from the Phone XS, and waited almost 5 - 10 minutes for him to finish that thing with 291 block, or whatever those are , and after that sayd "Finishing Flash" and here i didn`t know if the process was finished or it was still flashing and the first time i unplugged the USB cable, sticked the battery out, inserted the sim card, and powered the phone on, and that error with "Configuration Error, Please contact your operator" apperead to me .... i've tryed to let him more when the Phone XS sayd to "Finishing flash" because i've thinked that it wasn`t finised... but the same result like in the first case ... so PLEASE if someone knows what i should do to make my phone work, please help me .... i want to appologise for my bad english, and i want to thanks everybody who will try to help me.

[Vizzpv]

hey fredik how about changing the location to the the phone memory instead of the memory stick ?

[francis62]

zuzu_zuzu, on 2006-12-25 16:30, said:

So, i`ve read the tutorial exactly, i've downloaded the corect files, [ W800_R1BC002_MAIN_EU_EMEA and W800_R1BC002_FS_EU4 and w800_r1bc002_change_custom_folder and (first link from the link that was gaved in the first page of the tutorial) and for the custom pack, customization i've tryed with more than one file, because when i enter the >*<<*<* menu on the phone the CDA from there is 102338/23so i've chosed a k750 customization, just that i don't know if it was the right one] i've made with glslide the new Main Firmware, i've connected the phone to the usb cable, that was already plugged to the computer and made a new folder in the root of the memory stick [ \custom ] and after that i copyed the "tpa" folder there. i've turned the phone off, and i tooked the SIM out, put the battery back, opened the Phone XS, presses Start, configured with USB connection, biggest speed from that list, and chosed K750 CID 49 from there. Pressed the Flash Menu, and selected the Main Firmware that i've made, selected the W800_R1BC002_FS_EU4 for the FS, checked the first 2 boxes from a total of three, pressed the C button from the phone, inserted the USB cable and pressed FLASH from the Phone XS, and waited almost 5 - 10 minutes for him to finish that thing with 291 block, or whatever those are , and after that sayd "Finishing Flash" and here i didn`t know if the process was finished or it was still flashing and the first time i unplugged the USB cable, sticked the battery out, inserted the sim card, and powered the phone on, and that error with "Configuration Error, Please contact your operator" apperead to me .... i've tryed to let him more when the Phone XS sayd to "Finishing flash" because i've thinked that it wasn`t finised... but the same result like in the first case ... so PLEASE if someone knows what i should do to make my phone work, please help me .... i want to appologise for my bad english, and i want to thanks everybody who will try to help me.

anythings seem to fine on flashing,
use correct custpack
temperory don't add additional patched.vkp except custom.vkp
may be flash with main firmware only
check whether all files from tpa/preset/custom are copy to memory card/custom
check your memory card? don't remove when you powerup.