6 replies to this topic

[S7Fan]

I was absolutely stupid and flashed my K750. Main file over the FS file, now what? I can't open it up in Omnius or XS++, Bering in mind it still boots and is able to still be a phone. (flashed it to W800 RBD001, Main and FS)

Omnius error log when identifying

Action journal
22:02:10   Identify
22:02:10   Shows detailed information about the connected phone.
22:02:10   Operating system: Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
22:02:10   Application version: 0.34.4476
22:02:10 . The action name is 'Identification'
22:02:10   Selected phone type: K750
22:02:10   Selected connection method: USB EROM
22:02:10 i Instructions
22:02:10 i 1. Make sure the phone battery is charged to at least 50%.
22:02:10 i 2. Switch off the phone!
22:02:10 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
22:02:10 i 4. Press and hold the button C, then connect the cable to the phone!
22:02:10 . The action started waiting for the user
22:02:17 . The action finished waiting for the user
22:02:17   Connecting via Generic EMP USB Flash Device (USB1)...
22:02:17   Device driver version: 2.2.0.5
22:02:18 e Error: Failed to start communication
22:02:18 . The action entered shutdown phase
22:02:18 . The action reported failure

Error code
# 0AA47B5136798235

Error details
---
69 87 29 97 A2 9A DA 43 50 83 65 62 EC 63 EE 5E 
C8 35 8E 39 0D 09 E4 5A C0 41 BA 53 DB 6F 82 71 
B8 7B AC C8 2C DB BA 53 D0 1A 4A 73 34 11 A3 17 
06 56 6E D9 C4 21 D3 57 1B 1A 88 52 BC AD 62 F9 
91 7D D9 12 B4 85 9A 07 13 AC 96 11 02 42 D2 1B 
78 A3 1C 5A F0 00 A4 D2 00 FF FA EB E1 20 23 DA 
D6 46 BE 49 6C EF 01 55 66 60 24 1D 74 43 B2 75 
68 09 2E E3 26 04 7D 83 
---

Edited by S7Fan, 28 April 2012 - 09:24 PM.

[Boysie]

If it's working then what's the problem? Oh and thread title changed. 'I am an idiot' is not a suitable title.

[S7Fan]

Boysie, on 28 April 2012 - 09:17 PM, said:

If it's working then what's the problem? Oh and thread title changed. 'I am an idiot' is not a suitable title.

Sorry about the title name. Basically I flashed it to a w800 unmodded and I want to add stuff like bigger sleep clock louder walkman etc. but when I boot it to change the flash it wont work.

[Boysie]

S7Fan, on 28 April 2012 - 09:22 PM, said:

... but when I boot it to change the flash it wont work.

I don't understand this part. You mean it won't connect?

[S7Fan]

When i boot it holding 'C' and then try to connect to the the device in XS++ and it just says  

22:10:50| Sending db2010_cid00_prodid_p3l.bin...

and Omnius i just get errored

To make my point clearer, I have a k750 I put w800i filmwere on it BUT the MAIN file Overwrote the FS This is probably my problem of why It wont connect to the PC.

[Boysie]

It is not possible for main part of firmware to overwrite the FS part as they are written to different addresses.

Turn off phone, Reinsert the battery and connect.

[S7Fan]

did the battery didn't work still waiting on that bin to get to the phone.

looked back at the logs, some how It flashed it, Might of corrupted it?

8| Done flashing

18:18:58| Now flashing filesystem...

18:18:58| Flashing c:\users\jake\desktop\w800_r1bd001_main_eu_1_ca_red36.bin

18:18:58| Header type: BABE

18:18:58| 291 flashblocks

18:24:33| Finishing flash

18:24:35| Done flashing

18:24:35| Flashing was successful

18:24:37| Disconnected... Unplug the phone

18:25:51| Shutting down...

18:24:35| Done flashing

NEVER MIND, Faulty cable god I am a D***.

Edited by S7Fan, 28 April 2012 - 11:22 PM.