51 replies to this topic

[faridbahal]

ok! i flash my s700 with wrong info from TOPSONY !!
in topsony site for s700 in this page: http://www.se-tool.n...main_fs_raw.asp for MAIN Firmware says :MAIN Firmware - 44020000 - 00100000 !!!!!!!!!!!! and for FS Language says: 45000000 - 01000000!!!!!!!!!!
IT WAS WRONG
i flash with this and my phone dead! i use my full back up but phone dont turn on! when my phone turn on and SE logo apper, screen change to white and others and take vibre
sorry for my eng
please help me

[jagheterfredrik]

Atleast it turns on, you just need to reflash your mainfirmware.

[faridbahal]

i have just one full back up i dont have any main or fs back up

[Ztryfe]

cool down, if it turns on there is a lot to be done....

Dont worry:

FLASH FILE:

http://www.se-tool.n..._EMEA_EU_US.rar

(EMEA EU US)

LANGUAGE FILE:

http://www.se-tool.n...S_US1_CID29.rar

US1 (american english, latinamerican, canadian french)

They are rar'ed and in bin format jut ok to SEFP + FAR

How to flash? connect normally to far and enter flash folder then copy the image file into the flash folder

http://forums.se-nse...?showtopic=3666

Keep us posted...

[faridbahal]

tnx
i was it last time and my phone dead!!
ok i use this for again
last time when fs and main flash i cant enter FS and i use my back up

i flashing main but my FS file is EMEA 6 because im persian and in this FS there is farsi langauge

sorry! my english is too bad!!

[Ztryfe]

dont worry about the english, the EMEA6 file is:

http://www.se-tool.n...EMEA6_CID29.rar


however you must enter FLASH not FS to flash those files.

[faridbahal]

i flash it again with far manager but when enter FS for write custom_files hang in this level:

Edited by faridbahal, 23 October 2006 - 10:33 PM.

[Ztryfe]

im here im here...

read my previous post, you have to enter FLASH not FS

BTW: remove your imei from the picture just put a black square or something!!

[faridbahal]

i enter flash and flashing MAIN and FS but in the end i enter FS for write custom_files but hang

[Ztryfe]

so you have already flashed the files?   then you might want to disconnect the phone and try to power it up before writting anything else....

[faridbahal]

it isnt turn on, in perivios flash time power key work and SE logo apper but now power key dont work and phone dont turn on        

[Ztryfe]

try removing and reinserting the battery, happens to mine somethimes!

[faridbahal]

i try it for sevral and sevral times!! dont turn on

[Ztryfe]

@jagheterfredrik!  

gotcha! any help on this?


@ Faridbahal

Can you connect to far?

[faridbahal]

yes i can but cant enter FS


jagheterfredrik! left topic :(:( my phone dead :(

Edited by faridbahal, 23 October 2006 - 11:00 PM.

[jagheterfredrik]

As long as you can connect to it it shouldn't be a problem. You choosed the right script ?
...seems as you did... what does the end of the logfile say (far\plugins\sepf\sefp.log) ?

Edited by jagheterfredrik, 23 October 2006 - 11:05 PM.

[faridbahal]

sorry my eng is poor!
means i wait to enter FS? in wait for 10 mins but dont enter

"You choosed the right script ?"
i used:
S700i_R3M008_FS_EMEA6_CID29
S700i_R3M008_MAIN_EMEA_EU_US

[jagheterfredrik]

I meant the script on the far-right side where you choose the port and speed. But it seems as you choosed the right one. What does the end of you logfile say ?

[faridbahal]

edited!!

Edited by faridbahal, 23 October 2006 - 11:17 PM.

[jagheterfredrik]

Yeah that, but only the very end of it. (edit you previous post please)