7 replies to this topic

[nizzle1]

i had a silver w715, i thought it was bland so i spiced it up a bit . tell me what you think and anyways i can improve

http://img101.images...jpg&via=mupload

http://img337.images...jpg&via=mupload

http://img710.images...jpg&via=mupload
in the pic i have black buttons and a siver navigational pad with a black center button. i only did this because the black navigational pad was not working too well :S but i have to admit it looks nice

http://img130.images...jpg&via=mupload
in this pic i did not really like the pink grille at the back where the loud speaker was so i changed it

http://img215.images...jpg&via=mupload
if it is impossible to see, which it is, the back where it slides up is brown. this combination of red brown and black is quite a nice effect
http://img156.images...jpg&via=mupload
light changed to red looks quite nice used tissue paper

http://img263.images...jpg&via=mupload
finally this is the side view, red, gold and black looks good i think

Edited by nizzle1, 02 June 2010 - 08:29 PM.

[Krazy D]

I cant see the images  

[nizzle1]

 Krazy D, on 02 June 2010 - 08:20 PM, said:

I cant see the images

sorry :S i posted them on image shack instead cos im unable to put it here

[Flo95]

Nice, how did you make the led red?
It looks like the paper is in the glass of the led.

[nizzle1]

 Flori, on 02 June 2010 - 08:34 PM, said:

Nice, how did you make the led red?
It looks like the paper is in the glass of the led.

i put tissue paper in the glass, yes it is infront of the led so it doesnt get damaged

[Krazy D]

YOu should make the images show on here by copying the direct link from each image in imageshack and then clicking insert image.

Edited by Krazy D, 02 June 2010 - 09:05 PM.

[Flo95]

@ nizzle1:
How did you get it there?

[nizzle1]

@ Flori W705:
1. Take the battery cover off, take out battery and sim, u see four torx 6 screws
2. Undo those screws and use a guitar pick (or something thin like a credit card) to go around the sides of it.
3. When you have taken it off, turn the case upside down (the one you just took off) and you should see some plastic glass where the LED would be.
4. if i were you, use a hole punch to cut a neat little circle, use the little circle in the lens and push in gently with screwdriver
5. when reassembling the main board chassis and the phone body make sure you keep an eye on the tissue paper so it doesnt move around, if it does just move it back into place
6. replace the torx screws
7. turn on phone and check whether your mod has worked
good luck Flori W705 when you do it post your result i would like to see it