0
how to connect ur phone to xs++ software just remove ur mobile
bettry and reinsert it now do not switch on attach ur sony ericsson
data cable to mobile now press c button and insert ur cable to PC now release button wait
until ur driver of mobile install automatically.now u see ur mobile is connected
very important this to do before u proceed:-
First backup your GDFS, this can be done by:
Connecting the phone
Click GDFS (at the bottom)
Click 'Backup GDFS'
Then when your ready to flash:
Connect your phone
It should automatically display the Flashing screen, if not click 'Flash' at the bottom.
Tick 'Flash Main Firmware' then browse to the MBN file.
Tick 'Flash File System' then browse to the FBN file.
Tick 'Customize File System'
Select W810 in the list
Select your FS region.
### If there is no W810 option in the list or if it didn't have your FS region###
Select own_custpack in the list.
Search the net for a custpack for the W810 FS region of the phone. (Look on 4shared, TopSE and iProTebe)
Extract the ZIP/RAR file WITH FOLDER NAMES to <XS++ Directory>\own_custpack
Click 'Flash'
...wait...
Once XS++ says to disconnect your phone, disconnect it.
You have now flashed your phone.
i had given example for w810 u can use this software for many modles
note: donot try to found new verson for xs++ 3.1 is the best for flashing
download it from here:- http://forums.se-nse...-xs-v31-darwin/
Edited by san1986s, 30 May 2010 - 11:40 AM.
