[jt_]

please help, i was using far to change my menu.ml file, and i did, and everything was fine, and then i used far again to flash the no headset patch, and after i flashed that the phone wont turn on, it wont charge and the computer wont reconize. PLease help

[qwerty12]

Ok Ill try to help. Which firmware were you using and which version of the patch did you apply? The phone can only die through patches if it patches the gdfs and erom.

[jt_]

im not sure the version, but i was re reading the thread and i think the patch was for a different firmware version =\ is there anyway to fix it?

[qwerty12]

Take out the battery and put it back in again. Bring up davinci and click the read cid/test cable. If it detects the phone then take out the battery and switch the phone on to see if it works. If it dosent ; reflash the phone through davinci.

[jt_]

i dont have a way to get credits for davinci thou. i have the older version that is supposivly supposed to be free, but it wont reconize


i got the new davinci, and it couldnt read the cid/test cable, how could i get program to detect my phone if it doesnt turn on?

[qwerty12]

The phone must have messed up somewhere. Did you use a SSW patch? Using VKP patches are much safer. IF nothing will work ; you are gonna need a service cable or a trip to a phone shop.

[jt_]

any other ideas?

[sia_ide]

u need a service cable or take it to a service center

[jt_]

ok so it was part software part hardware, the software crashed but i got a new one, but the lcd is burnt? or the main circuit board it burnt?

should i send it to se ? any tips?

[DarkSide]

If I understood well, only to say that the "Flashing" does not spoil the “Hardware”. As sia_de has said: you need a Service Cable or take it to a Service Center, only for "to reanimate" the phone. Except for better opinion ...

Regards.

[jt_]

i brought it to a cell phone repair store, he looked at it, and said the hardware might be fryed or something, so he took it apart, and but a new LCD in, and it still didnt work, he said it was the main board or something

[DarkSide]

jt_, on 2006-09-03 06:41, said:

i brought it to a cell phone repair store, he looked at it, and said the hardware might be fryed or something, so he took it apart, and but a new LCD in, and it still didnt work, he said it was the main board or something

It's not truth, It's as if they said to you: if you update the BIOS of your PC you burned or fryed the PC. You only used the DCU-60 cable and programs. Why the phone had to burn? For the programs? No way! Only lies.

Regards.

[jt_]

=\ then whats wrong with the phone, because it was china branded, but after he looked at it and updated teh soft ware, it had a different opening theme, the regular se open theme, not the china one, so im not sure what other possiblities could there be?

[jt_]

maybe it got loose? n e one think i should open it and try and put it on tighter? really need help

[DarkSide]

When “Flashing” the phone, normally the original configurations are lost, but the phone isn't burned. No way !

The only thing would be if your phone it already had defects when you bought it. But not for "Flashing" the phone. Those are lies.

Regards.

[jt_]

but after he updated the firmware, the phone turns on (i can see the light on the keypad) i can hear it start up, but nothing displays...

the guy said he tried butting in another lcd to test and he said that one didnt work either so... would it be a good idea to open and push the plug in more, or send it to se(old then 2 years asked the seller) because i have no clue what to do

[DarkSide]

When is made a badly “Flashing” usually happens that, the phone fault. But not because the phone is damaged, but because this badly “Flashed”. You must be tried as sia_de has said above.

Regards.

[jt_]

badly flashing? really?? could it be that, because i purposly went to that store because it had a good reputation and looks of good feed back, also i dont think i have a se service center near by, i live in Canada , BC, vancouver, and i dont think there one here

ok so i was SUPER frustrated, so i decide to take it apart, and i was looking at the lcd part that connects to the main board, and i took it off and blew it with a dust off, i put it back in and i bu the battery back in, nothing, so i pushed on the connector and the LCD LIGHTS UP so any other tips or instructions?

[DarkSide]

Everything is possible. I have seen “technicians” who didn't know that it was “Flashing”.

Regards.

[jt_]

ok update*
so the lcd plug that connects to the main board was loose, so i put something ontop so that the bottom of the plastic key pad would push the connector and hopefulyl it will hold, so it does =), but still when ever i open the phone, the lcd is white? so i plugged the phoneinto the computer, and i used the seus, but it wont let me, says that i have the latest version =\ any ideas on what i should try now?