106 replies to this topic

[xlich]

Quote

If you flashed to the wrong CID phone or flashed the wrong byte range (i.e. did not follow the instructions precisely)

but phone was CID 36 and i really checked the range of bytes ...  
so no hope ....

[NYGANG_EDDI]

Hello

I did Everything on my Brown w800 and everything went fine, It now reads as a RED phone yet SEUS still says I have latest version firmware and I dont need an UPDATE!!!!! ARGG!!!

some info on my phone

Phone Color: Red
Phone CID: 36
Language:CHINESE
CDA Number:
Firmware Version:R1K001
Phone Model (1):W800c

Can someone please help me find out what I have to do next so SEUS works for me

Edited by NYGANG_EDDI, 15 September 2006 - 02:06 AM.

[qwerty12]

If your phone has no CDA number which it looks like from that text dump ; seus does not know which firmware to give you.

[daremo]

my k750 brown reads 4400 0000  00002C84 could I still flash it with the downloaded erom red ?

[mauro1947]

Hi
Excuse me, but it's TOTALLY probed this in a Z520 (i say that for the address and the lengh)

Thanks!!!
And excuse my english

Edited: Nobody know?
Thanks!

Edited by mauro1947, 23 October 2006 - 05:06 PM.

[lapwing]

qwerty12, on 2006-08-10 07:38, said:

I believe this is it:

http://www.se-tool.n...WN_file_bin.rar

hiiiiiiiiii


i donwlaod this file and flash it to my phone and now my phone it's not work


can anybody helpppppppppppppp me

and now when i prees c button and conect it to computer no responce


what is the problem r my phone is carch or what ???????????/


help help help it's new phone 1 month only

[jagheterfredrik]

Did you buy it second hand ? Your EROM is damaged, you'll need a service-cable to fix it.

[lapwing]

noooooo it's new

when i bye it it's brown and i flash it to red and work  ok

and now i flash it back to brown and i sure i write the file to 44000 000

and lenght 0002 0000

and when i remove the battry and but it agine the phone not work

and when i conect it to computer not responce

how i can fix the problem ???????

[jagheterfredrik]

If you can't get it recognized by the computer it's EROM-damaged and you need it repaired with a service-cable.

[lapwing]

what is the servic-cable

i'm try to use setoll 2 in topsony web site but it's tel me usb iterface not supported  here

[ka24e]

Successfully changed my phone from Brown to Red. (W800c). Then flashed to the newest firmware. Worked like a charm. I thank you, and you saved me 37 bucks for a cable.

[azreerml]

guys..need help here.. i try to convert my phone to red..but when i click at the flash at the FAR manager..it tells an error.. some one help me please

[jagheterfredrik]

"An error" is not a lot of information. (=More information please)

[azreerml]

thanks jagheterfredrik... the "an error" that i just mention is because the first time i try to flash, it didn't work.. and iam afraid i might lose my k750..because the FAR manager did told me that there was an error.. and i just shut down the FAR manager without looking at the error...

an right now..

i am happy because my k750 is RED... and now i can convert it to w800..

by d way.. is there a thred where i can convert my new RED phone...

[jagheterfredrik]

You might want to try GFlash;
http://forums.se-nse...?showtopic=5025
remember to backup your contacts first, try myPhoneExplorer to do that ( here ).

Edited by jagheterfredrik, 10 December 2006 - 04:42 PM.

[azreerml]

ok.. i have backup my contact using the myPhoneExplorer... and i just confius about the CDA as well as the firmware.. i lived in malaysia.. which is an asian country... what CDA and firmware that i should use?? anyway.. thanks for all the info.. i just want to get this right.. i have tried many times but it all end up in error... so.. help me please..

sorry for my poor english....

[njh]

@jagheterfredrik

I got the same problem just like the others who got this 'error 0' while flashing it to Red using Far Manager. I tried 3 times but I still having the same problem, after flashing it to Red using Gflash it shown (successfully flashed - I forgotten the words it use to show complete). I removed the battery and put it back just like usual (after patch or flash or changing other files on TPA), i can't boot. This is my friends phone he bought it early of this year, I'm not sure if he bought a 2nd hand or new. But there's something wrong with the phone before i flashed it to Red, when i plug in the USB cable to browse through the MSPD stick (to view some pictures) or charge the phone just like any other K750i or W800i or even mine.. i disassemble/ dismantle this phone to check whether the port is not properly connected and to check the pin is torn or whatever loosen thing that might cause the USB cable to unable to connect. In the end I use my hand to grab the phone to connect the phone with USB cable without the phone chassis without camera and speaker. I knew it's Brown when I done dismantle this phone using my hand to manually connect to check the phone's detail (CID) just like the way I convert it to Red previously. If the erom is damage what should i do? the phone don't even start with FAR or Gflash or replace with a fresh a battery..

2.Can you post a picture of Service Cable? Cost? Where i can buy one?

Regards
Nelson@njh

@jagheterfredrik

Is this the one? http://www.service4h...product=A000609

Nelson@njh

[jagheterfredrik]

1. Try davinci 13.8 recovery (with service-cable)

2. Yes that's the one.

[njh]

@jagheterfredrik

Just to let you know that my handset is not fully repaired but it has revived by SeTool (now it's Red), but now my phone start without LCD lights..
before this the story goes like this >
I met a phone technician who works in a city at a SE shop(Authorised Service Center), he told me to sell my phone at 1st. So i told him that i wouldn't sold it to anyone, after he heard me saying that i'm not selling it. He told me that he will try his best to revive the dead phone. An hour later he says that my phone has been revived and then he told me that the phone automatically switch off after 1 minute bootup. And now i'm thinking.. what's gonna to do with the LCD if the phone has been revived or changed to Red? because previously I convert it to CID36 brown > red and it was dead due to unknown reason maybe the phone's port doesn't work (my previous post - I dismatle it to connect to USB cable with my barehand to successfully flash it to Red). Maybe that time i broke the LCD flex cable or some other things.. Now he sms me to change the LCD.. proceed? i think it will be costly..

Do anyone knows how to fix or has experience in LCD without lights? Any solution?

Now I'm gonna Buy a K700 USB cable and mod it into Cruiser Cable with K750 USB cable from Darkmen. No need to send to SE Shop.

[Krzysiec]

Hello i have a question ... Can i do this trick with free change BROWN to RED on my Z520i CID 36 phone ? Or this is only for K750/d750/w800 ?