[dalibertine]

Ive searched the forums for tutorials on how to patch/downgrade CID 53 W200i.

Ive installed Executor, run, asoon as phone turns off, i take out battery then insert. I connected using the w200 script at This tutorial. Ive tried connecting to Bflash with RSA off, varying speeds and while holding C, 2+5 and 3+6, and i always get the same error


Please help, I know the W200 is notorious for not connecting right, but any tips would be great.

[attachment=35646:untitled.JPG]

[Boysie]

I think all you can do is keep trying else pm cchaos with a link here.

[KK§cchaos]

Keep trying is the only advise I can give you

[Boysie]

Doing a full flash first might help. Sometimes easier to enter bflash with a 'clean' phone.

[dalibertine]

Ill go through exactley what ive done

Old State; W200, CID53, R4GB001, CDA102738/71 R9A

Current State; W200, CID53, R4HA014 CDA102737/4 R1A

Interesting note, This error comes up in XS++ 3.1 Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W200) ...using GDFS name

I upgraded firmware to R4HA014 with OFlash as is most used firmware about Modding community. I uploaded the Customize.xml file through JDFlasher OFS and created a REST file with mkrest for R4HA014 MAIN.

Turnt the phone on, waited for it to inisialize. I compiled the executor.jar, executor.b and customize_upgrade.xml from anycid.rar posted by den_po and uploaded with OFS.

Turnt the phone on, executor installed, run application, and asoon as phone turnt off, I removed battery and reinstared.

This is where it dosnt work. I open FARManager fresh from desktop, ALT+F1, open 'jus da flasher', use Script w200.xml posted in this post with rsa UNchecked and checked, and ive tried all the varying speeds. and I ALWAYS get the same error when trying to access BFlash {image attatched in first post}

If need any more info, or if you can help atall, would be great.

Thanks, Mason.

:EDIT: And a quick question, when i run executor and phone turns off, is it good for one connection to the BFlash, or can i take out/reinsert battery and try again?

This post has been edited by dalibertine: 29 August 2009 - 05:49 PM

[KK§cchaos]

My advice remains the same: keep trying.

Im guessing but it should be ok to reinsert battery for multiple connections to JD flasher. And that IMEI name doesnt mean a thing