[Damjan_DD]

Hi guys,
I was just trying to install elfs on my phone, it turns out that you have to patch the Elfpack and Library files to your phone(duh ). So if I patch these files to my phone will I lose everything that is on my phone's memory and my memory card? Even if that's the case, I would like further instructions how to do this with JDFlasher+FarManager(I have a k800i CID53 so it's my only option, right?) I have done some modding, like changing the menus etc., so I'm not a total noob

[Boysie]

Depends on what FW your running. If you have R8BF, you're ok and all you need to to is follow the AnyCID method of patching and download the elfpack starter kit in my sig. If you haven't, then you'll need to update to above FW and backing up your data will be necessary.

This post has been edited by Boysie99: 05 July 2009 - 06:21 PM

[Damjan_DD]

Boysie99, on 2009-07-05 20:28, said:

Depends on what FW your running. If you have R8BF, you're ok and all you need to to is follow the AnyCID method of patching and download the elfpack starter kit in my sig. If you haven't, then you'll need to update to above FW and backing up your data will be necessary.

Thanks boysie, your starter kit is great!
But in this step>>>3. Disconnect phone from 'Mass storage' SAFELY!!, reinsert battery connect to JDFlasher or SETool
and apply patches in the patches folder. If you have Heapshift already then obviously you don't
need to apply this one.
you say APPLY THE PATCHES, how do I do that?(I'm using JDFlasher)

[Boysie]

As you are CID53 you need to follow the AnyCID method. Its in the Research and Development section.

[Damjan_DD]

Boysie99, on 2009-07-05 21:57, said:

As you are CID53 you need to follow the AnyCID method. Its in the Research and Development section.

I have read on another forum that you have done this already, with a k800i as well. So pls help me out a bit, I'm having trouble with the very first step, how do I use this mkrest thingy?
And with this Any CID method will I have to flash my phone and lose all data?

[Boysie]

The flashing question... I believe I answered that in post 2.

To make rest file you drag your main file (.mbn) onto the exe.

Read the AnyCID tut carefully.

This post has been edited by Boysie99: 05 July 2009 - 08:34 PM

[Damjan_DD]

Boysie99, on 2009-07-05 22:39, said:

The flashing question... I believe I answered that in post 2.

To make rest file you drag your main file (.mbn) onto the exe.

Read the AnyCID tut carefully.

I did it like this: started mkrest.exe, then dragged the mbn file onto the black surface and nothing happened!if I press enter the program closes immediately
I eve tried dragging the mbn file onto the icon of mkrest.exe and still nothing happened.
What should I do? What am I doing wrong?

Ok, I got the K800_R8BF003_MAIN_GENERIC_WI_RED53.mbn.rest.mbn file somehow:D yey
Moving on with the tutorial now;)

This post has been edited by Damjan_DD: 05 July 2009 - 08:49 PM

[Damjan_DD]

Ok, I have hit another wall
When I run the Executor.jar from the Games folder in my phone, it doesn't turn off my phone, but the tut says it should:(
WTF?! pls, help me out

[Boysie]

You are using correct Executor for your FW? What FW is on your phone at the moment?

[Damjan_DD]

Boysie99, on 2009-07-05 23:26, said:

You are using correct Executor for your FW? What FW is on your phone at the moment?

R8BF003, and I'm using the executor in the folder db2020 in the anycid.rar file

[Kaosblade]

The executor must be specifically for your phones firmware, and you must upload customize_upgrade.xml & executor.b as well as the executor.jar for it to work.
If you can't find it for your phones firmware (the right executor bypass package) flash your firmware to a firmware that it is available for and then use the executor.

[Damjan_DD]

Kaosblade, on 2009-07-05 23:35, said:

The executor must be specifically for your phones firmware, and you must upload customize_upgrade.xml & executor.b as well as the executor.jar for it to work.
If you can't find it for your phones firmware (the right executor bypass package) flash your firmware to a firmware that it is available for and then use the executor.

I uploaded them as well!!! Just to be sure, tell me where I was supposed to upload them, what folder?

[Boysie]

Tpa/preset/custom

[Damjan_DD]

Boysie99, on 2009-07-05 23:40, said:

Tpa/preset/custom

Holy !!!
I accidentally deleted a file called Customize.xml from Tpa/preset/custom
What should I do?

[KK§cchaos]

Is the main branded? If so this must be unbranded (genric in the file name)

Find a custom pack thats in the right FS region and upload that to TPA/PRESET/CUSTOM

[Kaosblade]

Don't worry about it, just find the right custom pack and upload it back. To where cchaos mentioned. ^

[Damjan_DD]

cchaos, on 2009-07-05 23:54, said:

Is the main branded? If so this must be unbranded (genric in the file name)

Find a custom pack thats in the right FS region and upload that to TPA/PRESET/CUSTOM

I'm trying to, but(and I know this is extremely noobish) when i do the >*<<*<*< thing, ont the top it says GENERIC_WI but under Customisation it says:MEDITERR. Which one should i search for and then upload, generic_WI or mediterr??

[Damjan_DD]

For some IEXPLICABLE reason customize.xml has returned to my phone:D I didn't do anything. Anyway THANKS for the help guys, moving on with the tutorial now!!!

[Damjan_DD]

Uploaded the files to the folder you pointed out, installed executor on my phone, and it STILL doesn't turn my phone off!!!

[Kaosblade]

Try not to double/triple post, yeah..

What happens when you try to run executor? If the phone goes white and restarts you need to take the battery out before it comes back on . But, if nothing happens I'm not really sure.