[satan22o4]

Hi... I have ben here since 3 years and I already moded my w810i like hell. Recently I bought new k770i.

After searching abit I found there are some patching and customising to k770i like we did to w810i but couldnt find a guide.
In othere thread I read that will have to downgrade to CID52, So how is it possble ?

So for all the members out there who have k770, can some one please post here the guides and drivers including elf and kindly tell me the gides as I used to patch my w810i with setool2lite.


Here is info about my mobile. By the way I can acess FS from XS++ :/

Quote

13:47:34| Baseband ID: 9900
13:47:34| Protocol Version: 3.1
13:47:34| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K770)
13:47:34| ...using GDFS name
13:47:34|
13:47:34| Profiling SEMC phone...
13:47:34| Platform: DB2020
13:47:34| OTP CID: 51
13:47:34| EROM CID: 53
13:47:34| EROM Color: Red
13:47:34| IMEI: 35617902xxxxxx
13:47:34| Phone ID: K770
13:47:34| Region: M_EAST_N_AFR
13:47:34| CDA: CDA102568/109 R8A
13:47:34| Firmware Version: R8BC004
13:47:34| EROM: R3A022
13:47:34| Ready for operation!

I would really appreciate the help as Im desperate to mod my k770i.

Thanks in advance.

This post has been edited by satan22o4: 23 May 2009 - 07:25 AM

[Boysie]

For patching your phone you'll need to use the AnyCID method.

[satan22o4]

you sure this method will work ? somebody will confirm ? I dont want to ruin my new k770i. im loving it these days

[Corman]

it works - check the K770i Patches thread and you'll see a lot of people using patches on their CID53 phones

[satan22o4]

sorry again. i read the whole anycid thread. but dint get anything. first the guy says its for cid49 and then he mentions tha he doesnt apply patches during that method. anybody willing to tell what actualy i have to. i just need the patches. wil some body post a small tutorial.

[Corman]

Quote

How to enable patching on cid53 phone - the easiest way.

If you've got applied QA patch:
-just open BFLASH using QA2020 (ofcourse in JDFlasher wink.gif )
-put there xxxxxxx Main from CID52 (yeah, from cid52, I know what I'm talking about tongue.gif )
-put immediately quick acces patch for xxxxxxx main
-after patching QA, apply all other patches if you want to
-put xxxxxxx FS from cid52
-disconnect with far (by pressing ".." in FAR in phone), on "Are you sure?" press yes, exit far, unplug the phone, reinsert battery and turn phone on

If you haven't QA patch applied:
-Install MAIN from cid53, which support executor [only if needed!] (db2020 > OFLASH)
-Put executor files to tpa/preset/custom (db2020 > OFS)
-Run executor
-Remove battery from phone, remove sim and m2, then insert battery back and DON'T TURN THE PHONE ON!
-Put xxxxxxx cid53 main to qa2020>bflash
-Put QA patch immediately
-Put all other patches if you want to
-Put xxxxxxx cid52 FS
-Disconnect with phone, exit FAR, reinsert battery, turn phone on
© by mc_kibel
Enjoy smile.gif

Thanks to MC_Kibel

[satan22o4]

Thanks for the help. DUde I can't belive I'm so dumb....

Here is another stupid question ?

What programs I need to do this all. I mean I'm fimilar with XS++ and setool2lite.

never used any other programme to customize my old w810i

Need more help please.

Will this work for me
http://forums.se-nse...showtopic=20984 ??

This post has been edited by satan22o4: 25 May 2009 - 01:14 PM

[Corman]

You'll need JDFlasher, a plug-in for FAR Manager (it's like SEFP, maybe you used that on your W810 ?)

[satan22o4]

sorry again But i dint get the tutorial again Can you help me bit more.

Quote

If you haven't QA patch applied:
-Install MAIN from cid53, which support executor [only if needed!] (db2020 > OFLASH)
-Put executor files to tpa/preset/custom (db2020 > OFS)
-Run executor
-Remove battery from phone, remove sim and m2, then insert battery back and DON'T TURN THE PHONE ON!
-Put xxxxxxx cid53 main to qa2020>bflash
-Put QA patch immediately
-Put all other patches if you want to
-Put xxxxxxx cid52 FS
-Disconnect with phone, exit FAR, reinsert battery, turn phone on
© by mc_kibel
Enjoy smile.gif

How to install main from cid53 ?? Need some more light on this procedure please.

[Corman]

I don't have a CID53 DB2020 phone, but as Boysie is reading this topic, he might give you the answer . I think you will have to drag a Main file in oflash

[satan22o4]

Ok thats it, I dont want to ruin my phone. As I aready heard k770i comes up with so many faulty hardware. Anyways now I just wanna increase the volume. So any help access FS ?
By the wat Thanks Corman for such a fast replies.

[Corman]

You should upload new (.zapf) acoustics to ifs/settings/acoustic

[satan22o4]

I know this but how to acess FS of k770 cid53. Any guide. I'm getting error.

" OpenPlugin<connectphone<getcid< cant find device info in xml[53red]>>>"

[KK§cchaos]

Then download test6 with all the addons, not an old version (which is what youre using)

This post has been edited by cchaos: 08 June 2009 - 09:26 PM

[satan22o4]

Thanks. It solved my problem. I'm in FS now. So anybody where I can get the acoustic and all ??

This post has been edited by satan22o4: 08 June 2009 - 09:49 PM

[KK§cchaos]

My signature: you want the db2020 ones

[satan22o4]

tHANK YOU VERY MUCH DUDE. bUT wHEN EVER i TRY TO COPY THE CONTENT OF ACOUSTIC IN ACOUSTIC FOLDER IT SAYS SOMETHING LIKE THAT CAN NOT EXECUTETE. cANT FIND RAR FILE. wHAT TO DO ?

[KK§cchaos]

Extract it first, then copy all the files to ifs/settings/accoustic

[satan22o4]

dONE

K770i Volume is very low. Can you also find me some good mods of K770 like some other stuff. And thanks for such a great help dude.

[satan22o4]

Where I can get fonts and all ?