[zunor]

help me to fix it i will give him 10$ in PAYPAL, im not a scammer its just very very very important to me!

hi i really need your help guys
I'm newb and i think i ruined my friend's phone (k610i) when i tried unlocking it

i tried unlocking K610i with SETOOL2Lite v1.11 and Remove SIM-Lock patch generator v2.2 i don't remember exactly what firmware i used but it was CID52 for k610 and c asia (i need heb) that i downloaded from: http://topse.ru/firmwares/M/ and i think it was R1KG001; C52

anyway i made vkp file with the Remove SIM-Lock patch generator v2.2 (using main and fs firmware files) like the guide said.
i did all you need with setool2l and pressed flash connected the phone while pressing C and it started working then i got to:
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

i didn't quite understand it, should i remove the cable then remove the battery and then connect the cable or connect the battery and then the cable? anyway i tried both with pressing C it didn't work so i just connected the phone with the battery without pressing C and it did that:

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\Assaf.ASSAF-10D1FE1CD\Desktop\K610_R1JG001_FS_C_ASIA_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
verify block error
last blk:45E20000,00010000
Elapsed:712 secs.


So what should i do now? someone told me the firmware i downloaded is not good so if this is the problem what firmware do i need? if its not it how can i fix it from home or even tell me i get to a unlocking store can i fix it?
another thing: when i connect it, its not recognized by anything, the gg... driver and the normal driver

its not my phone and i need to get it back to someone in to more days and i don't want to buy him a new one so what should i do, PLEASE HELP ME! I'M BEGGING

This post has been edited by zunor: 23 May 2009 - 07:21 AM

[KK§cchaos]

I would try downloading from se-users or iprotebe.cz

Flash it with XS++: setool2lite is not exactly noob friendly for flashing.

Before you can unlock it: you need to patch the phone with a quick access patch, then using the patch you need to patch in the unlocking patch that the simon program created

[Kaosblade]

zunor, on 2009-05-22 18:34, said:

hi i really need your help guys
I'm newb and i think i ruined my friend's phone (k610i) when i tried unlocking it

i tried unlocking K610i with SETOOL2Lite v1.11 and Remove SIM-Lock patch generator v2.2 i don't remember exactly what firmware i used but it was CID52 for k610 and c asia (i need heb) that i downloaded Wrom: JGDGVCJVTLBXFGGMEPYOQKEDOTWFAOBUZXUWLSZLKBRNVWWCUFPEGAUTFJMVRESKPNKMBIPBARHDMNNS
KVFVWRKJVZCMHVIBGDADRZ

Urm. It's really important that you generate the Sim-Lock Patch with exactly the same firmware that is on the phone that you are planning to patch. Otherwise it'll definetely do something unwanted to the phone. Most probably a funeral.
Look around on TopSony they should have the firmware your looking for.

zunor, on 2009-05-22 18:34, said:

PLEASE HELP ME! I'M BEGGING

[zunor]

so if i didn't do it with the same firmware this phone is dead? if i can fix it can you send me a good guide?

and how can i do anything if the computer doesnt recognizes the phone? (it says that it cant find a driver for it or something like that)

[devilwasabi]

Press 2+5 instead of 'C'

[zunor]

does anybody from here has msn or icq so they can help me ? (PLEASE PLEASE)

I WILL PAY 10$ IN PAYPAL TO THE ONE THAT HELPS ME

This post has been edited by zunor: 23 May 2009 - 07:20 AM

[Kaosblade]

zunor, on 2009-05-23 00:20, said:

so if i didn't do it with the same firmware this phone is dead? if i can fix it can you send me a good guide?

and how can i do anything if the computer doesnt recognizes the phone? (it says that it cant find a driver for it or something like that)

Okay. Firstly, YES if you don't patch with the same firmware the phone is dead. You can fix it by downloading the original firmware for that particular phone. Connect it to SE Tool or whatever you are using and the firmware should automatically come up. Now go to, Top Sony Downloads and click on Firmwares. Look for your phone and the MAIN firmware. Not the FS. Flash the MAIN firmware that is on the phone again. This will remove all patches and start you off fresh. You can do this with SETool or XS++ or JDFlasher.
But before you actually connect your phone, the reason it asks for drivers is because you haven't installed any drivers before working with a phone! Here's a tutorial on how to do that. Akshayy's Tutorial.


Then generate the patch you want (in this case Sim-Lock) with the exact firmware that is on the phone. The one you flashed with earlier. Patch the phone carefully using this. Another of Akshayy's Tutorials ^^.

There you go.
Regards, Kaosblade.

Ps; say thanks to a_k_s_h_a_y !!

zunor, on 2009-05-23 08:08, said:

does anybody from here has msn or icq so they can help me ? (PLEASE PLEASE)

I WILL PAY 10$ IN PAYPAL TO THE ONE THAT HELPS ME

No bribing please.

[number1]

You've made a small mistake, can't belive no1 spotted it ,
You've flashed a fs instead of a main

Quote

K610_R1JG001_FS_C_ASIA_RED52.fbn

fbn is a filesystem firmware you want a main instead so a .mbn , R6BC002 seems to be the lastest cid:52 firmware, register at www.seusers.com , under downloads go to K610 then R6BC002 then get K610_R6BC002_MAIN_GENERIC_TH_RED52 ,
unrar it remake the unlock patch , then redo the unlock/bypass using the .mbn firmware instead.

[Kaosblade]

I didn't see that. Yeah.