Well, actually, and patience
So dispel our sound! As usual we start a program WinHEX, open the folder with our drivers that we will edit! . Then simply drag this any driver (which you can edit). List of drivers (which is responsible for what):
Files starting with "farfield" refer to the speaker:
farfield_call - driver loudspeaker during a call
farfield_fm - driver speaker in FM receiver
farfield_play - driver loudspeaker mode proigryvatelya/mp3
farfield_ring - driver loudspeaker mode calling signal
farfield_rec - driver and microphone for video recording on a dictaphone.
Files starting with "PHF_" refer to the headset (headphones):
PHF_play, PHF_2_play, PHF_3_play, PHF_4_play - when listening to music / sounds
PHF_call, PHF_2_call, PHF_3_call, PHF_4_call - when you talk
PHF_ring, PHF_2_ring, PHF_3_ring, PHF_4_ring - when an incoming call (if enabled "Silent"
BTL_play - while listening to the player through BT headset
handset_0_call - the sound of conversational dynamics
Sysconn_fm - radio in the headphones
Sway any of these profiles in the program WinHEX (in my example, I peretyanul profile farfield_play)
You will see that the program will give you a bunch of all values! Do not worry ...
The right hand column you see any names, letters, symbols, etc.
In the middle column you will see a big pile of all the numbers.
In the left column, we do not want;)
We start editing from the right column (where there is a letter)
There you will see such options as:
HK.AUX01 .. JG - and HK.AUX02 .. JG - this volume
HK.SPKRN .. JG - responsible for the loudness of the sound and bass
HK.SPKRP .. JG - suppresses all the distortion, rattle, etc.
GK.NoiseReduction - this parameter is responsible for noise suppression
GK.DRS .. HK.RX.. IG - Dynamic range (a kind of equalizer for frequency)
HK.RXFILTER - the sound quality in general (sound, filtering)
And not only these parameters, in addition to these there is still much any, but basically we have enough and to edit these settings and get good sound.
On the screen you see, I started to edit a parameter HK.AUX02 .. JG (I took it for example)
Near it you can see is that the (letter) "A" through two points
In order to increase the value of the parameter (in addition to the volume or noise, frequency, etc.), we need to reduce the value that is 99 .., 10, 09, 08, 07, 06, 05, 04, 03, 02 , 01, 00, FF, FE, FD, FC, FB, FA, F9, F8, F7 ... since F is - E then D, I and C, B, A.
In order to reduce the volume needed to increase the value (only in reverse order)
So we are doing here:
You see that was before "41", as I lowered to 34 - that is, the value I have fallen, and the sound will be louder. Keeping our profile, pour it into the phone - happy.
. Actually that's all ... just very, you can edit other settings (for example HK.AUX01 .. JG, HK.SPKRN .. JG, HK.SPKRP .. JG, etc.) I hope I explained everything clearly, good luck you are editing:) A bit taken with manual
Source : Mobilefree.ru
Edited by nick14, 16 April 2009 - 05:24 PM.