403 replies to this topic

[h060]

darthvaderrulesyourmind, on 2009-02-05 18:58, said:

Yes, try connecting using 2 and 5 instead of C. sometimes it works better for me, that way!

When I try that I get this error a few seconds after I plug in the phone.
 Parallels_Picture_6.png   24.73K   32 downloads

However when I try holding c instead of 5 and 2 I am able to try flashing... but it still fails part way through flashing.
Still bricked..

[darthvaderrulesyourmind]

You're not using XP Service Pack 3 are you? On some computers you need to downgrade to XP Service Pack 2 to use JdFlasher correctly!

[h060]

darthvaderrulesyourmind, on 2009-02-07 23:05, said:

You're not using XP Service Pack 3 are you? On some computers you need to downgrade to XP Service Pack 2 to use JdFlasher correctly!

I am pretty sure it was SP2 but I will check again.

Today I plugged in my phone to the wall to charge and the red led on the side came on for about a minute, then went off. Does this mean anything?

I am charging it up and will attempt flashing from a different computer (will make sure it is SP2).

[darthvaderrulesyourmind]

h060, on 2009-02-08 13:25, said:

I am pretty sure it was SP2 but I will check again.

Today I plugged in my phone to the wall to charge and the red led on the side came on for about a minute, then went off. Does this mean anything?

I am charging it up and will attempt flashing from a different computer (will make sure it is SP2).

Not All computers require SP2 min for instance has SP3 and Far works better than ever!

[h060]

darthvaderrulesyourmind, on 2009-02-08 10:04, said:

Not All computers require SP2 min for instance has SP3 and Far works better than ever!

Ok good and bad news!

After keeping my phone on the charger for about 2 days I tried to flash again and it worked. Flashed MAIN and FS with no problems. I did everything else up until step 14. "Disconnect phone, remove and re-insert battery. Start it up. Let it finish, then shut it down."

The phone never started up after I replaced the battery. Now I have trouble getting the computer to recognize the phone. I have only got it to connect once... doesn't look good.

Thanks for all you help!

Edited by h060, 09 February 2009 - 07:24 PM.

[darthvaderrulesyourmind]

h060, on 2009-02-09 19:13, said:

Ok good and bad news!

After keeping my phone on the charger for about 2 days I tried to flash again and it worked. Flashed MAIN and FS with no problems. I did everything else up until step 14. "Disconnect phone, remove and re-insert battery. Start it up. Let it finish, then shut it down."

The phone never started up after I replaced the battery. Now I have trouble getting the computer to recognize the phone. I have only got it to connect once... doesn't look good.

Thanks for all you help!

Honestly it sounds to me that you may need to reinstall your flash drivers and then run an update with SEUS because you may have fried your EROM or GDFS (which are almost impossible to fix)!

[luca789]

miklax, on 2009-01-22 01:28, said:

Heyyy

Thanks for your tuto!!!

I've just used it to patch/debrand a w880i cid 53..
It's the same steps, but with W880i files

Thanks..

I have this kind of lock on my w880i and this Tutorial can't help me... how where your locks?  DSC00007.JPG   111.2K   23 downloads
thanks a lot
lukeeeee

[h060]

darthvaderrulesyourmind, on 2009-02-09 15:23, said:

Honestly it sounds to me that you may need to reinstall your flash drivers and then run an update with SEUS because you may have fried your EROM or GDFS (which are almost impossible to fix)!

I just decided to give up and get a new phone since I was eligible for an upgrade. My warranty on the w580 expired about 3 days before I bricked it... didn't plan this one so well. But it worked out because I got a blackjack 2 for $50 and its an awesome phone.

If anyone wants to try and fix my phone or use it for parts let me know. I'll give it up pretty cheap

[darthvaderrulesyourmind]

h060, on 2009-02-12 19:03, said:

I just decided to give up and get a new phone since I was eligible for an upgrade. My warranty on the w580 expired about 3 days before I bricked it... didn't plan this one so well. But it worked out because I got a blackjack 2 for $50 and its an awesome phone.

If anyone wants to try and fix my phone or use it for parts let me know. I'll give it up pretty cheap

If you are located within the USA and would pay shipping, does $5 sound good!

[h060]

darthvaderrulesyourmind, on 2009-02-12 15:14, said:

If you are located within the USA and would pay shipping, does $5 sound good!

I think shipping might be more than $5...  I don't really feel like losing money.

[darthvaderrulesyourmind]

Yeah I know. Lol, I was kidding anyway, as you should know, I already have a W580!

[bhuvangaur]

guyz
any way out for time exceed error till now??

[profipix]

bhuvangaur, on 2009-02-14 16:36, said:

guyz
any way out for time exceed error till now??

I had the same thing, bro, I just reflashed the phone again...
Or problem might be cuz u didnt take out and re-insert the battery..

Edited by profipix, 14 February 2009 - 08:11 PM.

[darthvaderrulesyourmind]

Yes the battery generally causes that error. Make sure you take it out!

[bhuvangaur]

tried a lot many times!
always took out the battery
and once tried without taking out!
damn!
not able to patch yet!

[darthvaderrulesyourmind]

1. Is your windows 32 bit or 64 bit?
2. Vista or XP?
3. XP SP3/SP2 or Vista SP1?

Please answer those questions!

[bhuvangaur]

windows xp sp2 32 bit

[jj123bb123]

When i get to step 21 and i have to turn on my phone (and when it gives the options Normal or Flight mode) it says configuration error contact service provider.  Now i can't use my phone.  Help ASAP Please.

Thanks so much in advance.

[KkSCchaos]

jj123bb123, on 2009-02-21 21:02, said:

When i get to step 21 and i have to turn on my phone (and when it gives the options Normal or Flight mode) it says configuration error contact service provider.  Now i can't use my phone.  Help ASAP Please.

Thanks so much in advance.

Upload a custom pack

[darthvaderrulesyourmind]

bhuvangaur, on 2009-02-17 07:25, said:

windows xp sp2 32 bit

Make sure you have microsoft .net framework 3.0 installed. It makes a big difference, trust me. Then try again with my Far version!