[darthvaderrulesyourmind]

• This tutorial assumes that you already have Jd-Flasher.
  
• "Please note that some parts of this guide have been quoted from PentaMedia's [cid53] W660 Ultimate Guide!, Use this method to flash/patch and copy files from tpa to pc"
  
• If you don't have JDFlasher you can download my standalone version of Far and Jdflasher from HERE and then continue on to step two. Of course then you should be using the version of Far within the Zip file (extract it first).

---------------------Get all the necessary files!---------------------

(Click the links to get the files!)
Main
FS
Custom Pack
Rest File
Quick Access Patch
AnyCid Software from den-po

---------------------Begin the Actual Work!---------------------

• Copy the updated qa2020.xml script to the JD-flasher/Script Directory
  
• Open FAR and press F11, select "just da flasher".
  
• Select script "db2020", port "DCU-60", speed 921600. Dont proceed yet.
  
• Disconnect phone, remove battery, insert it back.
  
• Click "jump down into a large rabbit-hole", connect phone while pressing the phone "C"-key.
  
• Now open oflash. Drag MAIN into oflash:/ and click "Yeah, flash it". Wait until its finished.
  
• Drag FS into oflash:/ and click "Yeah, flash it". Wait until thats finished to.
  
• Disconnect phone, remove battery, insert it back.
  
• Press F11 and select "just da flasher"
  
• Select script "db2020", port "DCU-60", speed 921600. Dont proceed yet.
  
• Click "jump down into a large rabbit-hole", connect phone while pressing the phone "C"-key.
  
• Now enter ofs. Goto tpa / preset / custom /
  
• Copy the files from the CUST into this folder
  Should be these:
  * Customize.xml
  * preloaded_config.xml
  No other files are needed but they can still be uploaded.
  
• Disconnect phone, remove and re-insert battery. Start it up. Let it finish, then shut it down.
  
• Press F11 and select "just da flasher"
  
• Select script "db2020", port "DCU-60", speed 921600. Dont proceed yet.
  
• Click "jump down into a large rabbit-hole", connect phone while pressing the phone "C"-key.
  
• Now open ofs. Goto directory tpa / preset / custom /
  
• Copy the anycid files for W580-RBE001 and DB2020 into this directory.
  
• Disconnect phone, remove battery, insert it back.
  
• Start phone up, wait until its fully booted. Start Menu -> Entertainment -> Games -> executor
  When the screen goes dark, wait a moment, then remove the battery and put it back. DO NOT START AGAIN!
  
• Press F11 and select "just da flasher"
  
• Select script "qa2020", port "DCU-60", speed 921600. Dont proceed yet.
  
• Click "jump down into a large rabbit-hole", connect phone while pressing the phone "C"-key.
  
• Now open bflash. Drag Rest into bflash:/ and click "yeah, flash it as a babe". Wait until finished.
  
• Now drag the Quick Access Patch to bflash:/ and click "yeah, flash it as a vkp". Wait until finished.
  
• Apply those patches you want.
  
• Don't forget to delete executor in Entertainment -> Games
  That will prevent you from an accidental hit!

---------------------Add More Patches!---------------------

• Press F11 and select "just da flasher"
  
• Select script "qa2020", port "DCU-60", speed 921600. Dont proceed yet.
  
• Click "jump down into a large rabbit-hole", connect phone while pressing the phone "C"-key.
  
• Now open bflash.
  
• Apply those patches you want.

---------------------Give Me Feedback!---------------------

This post has been edited by darthvaderrulesyourmind: 24 January 2009 - 07:16 AM

[a_k_s_h_a_y]

very good. this will clear all doubts and help out new people interested in patching, this should be moved to Tutorial Sections.

[PentaMedia]

You could acctually add the info about copying files to and from FS without JDF or even restarting the phone

[adhaar]

i am unable to flash fs................

[kapaionutz]

adhaar, on 2009-01-13 09:20, said:

i am unable to flash fs................

maybe, if you post here the error or the reason for what you cannot flash FS we can help you....

[darthvaderrulesyourmind]

exactly what I was going to say...

[outlaw420_420]

i cant add patchs. it says (error in line 1)

[darthvaderrulesyourmind]

Could you upload the .vkp patch that you're trying to load, that error means that the patch has problems!

[outlaw420_420]

here it is and when i pick qa2020 now and select bflash it resarts my computer but if i pick db2020_cid53 and pick bflash its fine

Attached File(s)

•  W580_R8BE001_Privacy_English.zip (4.11K)
  Number of downloads: 62

This post has been edited by outlaw420_420: 16 January 2009 - 05:06 AM

[darthvaderrulesyourmind]

Your problem is the patch, I have updated it and here it is!

Attached File(s)

•  W580_R8BE001_Privacy_English.zip (4.22K)
  Number of downloads: 161

[outlaw420_420]

darthvaderrulesyourmind, on 2009-01-16 10:59, said:

Your problem is the patch, I have updated it and here it is!

i found it already but thanks anyway

[darthvaderrulesyourmind]

Ah allright then!

[outlaw420_420]

do you know whare i can get a patch to remove Java security restrictions?

[darthvaderrulesyourmind]

Here you go:

;W580 SW-R8BE001
;???????? ??? ????????? ? ??????????? java (+"??? ???????")
;enable all java permissions settings (+"never ask")
;(?) den_po
;(p) UltraShot
4527B270: 027B 0222

Just copy and paste into a blank.vkp file.

[outlaw420_420]

thanks

[darthvaderrulesyourmind]

Your Welcome! More W580 RBE001 patches are here: http://www.topsony.c...ead.php?t=11698

[BassEX]

Anytime I try to move the MAIN to oflash:/ I get this error from FAR.

PutFiles<putfile<putfile_flash<flashbabe<header<send header error 1B>>>>>

Any idea what this can be? I've moved the qa2020.xml into the script folder of my jd flasher.

[darthvaderrulesyourmind]

Try running my version of Far, it already has all the updated XML's in it. Just download extract and run far.exe from within! Then continue with step 3. Let me know...

[yoko]

can yo give me the unlock patch for R8BE001 it was Orange branded
or tell me how to get it

[justme]

Use simox patch generator, it's in the R&D section.