1427 replies to this topic

[DummyPLUG]

Seems that it does not work with the latest K750 firmware, r1ca021. with this firmware both div 13.7 and yout plugin cannot detect the phone, but div 15.51 and offical seus II can detect it...

[_Sensible]

@DummyPlug,

It maybe that you have CID49 K750, i am not sure if SEFP supports that configuarion yet...

[darkmen]

af_, on 2006-06-07 14:28, said:

and in the future?  

in future you will able to write your own boot scripts.
so all in your hands

DummyPLUG, on 2006-06-07 15:27, said:

Seems that it does not work with the latest K750 firmware, r1ca021. with this firmware both div 13.7 and yout plugin cannot detect the phone, but div 15.51 and offical seus II can detect it...

so maybe you can send me dummylog?
bugmail: sephone@nm.ru

Edited by Darkmen, 07 June 2006 - 12:47 PM.

[sasha-SE]

works great on my k750(now w800)     

great work darkmen

thanks to mike

Edited by sasha-SE, 07 June 2006 - 02:16 PM.

[B-M]

stange, it doesn't work for me.. i can't get further then "connect cable while holing c" I already tried a lot of times but everytime it keeps saying: "error: Unable to open device: EPIUSB1, check port settings"  but already checkt them a lot of times :S

[darkmen]

B-M, on 2006-06-07 17:44, said:

stange, it doesn't work for me.. i can't get further then "connect cable while holing c" I already tried a lot of times but everytime it keeps saying: "error: Unable to open device: EPIUSB1, check port settings"  but already checkt them a lot of times :S

1. Check for USBflash driver installed
2. Try to use other USB port. (in this version usbscan makes only for first device (EPIUSB1)
i'll fix this very soon

[DummyPLUG]

gbrooks3, on 2006-06-07 20:39, said:

@DummyPlug,

It maybe that you have CID49 K750, i am not sure if SEFP supports that configuarion yet...

I am sorry but I found the problem. it just didn't work with the new USB FLash Driver, using the old one solve all problem.  

[Eggy]

Darkmen, on 2006-06-07 02:06, said:

Little bugfix:
-serial ports enumeration is now right and works
-far version control will perform checks from now
-creating\deletting folders exception is fixed.

attached dll only. Just overwrite it and go.

Was the file in the first post updated with this as well?

[DummyPLUG]

B-M, on 2006-06-07 22:44, said:

stange, it doesn't work for me.. i can't get further then "connect cable while holing c" I already tried a lot of times but everytime it keeps saying: "error: Unable to open device: EPIUSB1, check port settings"  but already checkt them a lot of times :S

Seems you have the same problem as me, try to download the old USB FLash driver at the phoneXC thread, and use that instead of the new SEUS Flash driver

I had some interesting experience. I had flash my K750 to W800, then finalization it with a K750 (forget, may be a w800) EU2, after that I update my phone again with SEUS, it detect my phone as K750 EU2, then flash it. after that I got a K750 with W800 startup anime,W800 theme, but with K750 media player, no flight mode and model say as K750... funny?

Darkmen, on 2006-06-07 20:44, said:

in future you will able to write your own boot scripts.
so all in your hands
so maybe you can send me dummylog?
bugmail: sephone@nm.ru

I am sorry, but I don't know what is the "dummylog"

[darkmen]

Eggy, on 2006-06-07 18:12, said:

Was the file in the first post updated with this as well?

No. Version number present in filename.

[Eggy]

Darkmen, on 2006-06-07 17:20, said:

No. Version number present in filename.

Ah, right. I thought it was only a part of the file that you attached. Perhaps it would be nice to add newer version to the topicstart as well? At least people won't miss the later versions then, or download an old one first to later find out there's already a new one available.

[B-M]

DummyPLUG, on 2006-06-07 17:20, said:

Seems you have the same problem as me, try to download the old USB FLash driver at the phoneXC thread, and use that instead of the new SEUS Flash driver

I had some interesting experience. I had flash my K750 to W800, then finalization it with a K750 (forget, may be a w800) EU2, after that I update my phone again with SEUS, it detect my phone as K750 EU2, then flash it. after that I got a K750 with W800 startup anime,W800 theme, but with K750 media player, no flight mode and model say as K750... funny?
I am sorry, but I don't know what is the "dummylog"

Thanks! this did the job for me.

Now i am at another stage..: [Next you must select phone_start mode - FS folder]
But where do i have to click then? It doesn't load anything, i can select the FS folder but then nothing happens.. am i doing something wrong?  

[darkmen]

B-M, on 2006-06-07 18:52, said:

am i doing something wrong?  

show me the log

[B-M]

Darkmen, on 2006-06-07 17:54, said:

show me the log

Ow wait! after the 8 th try it worked! Thanks for the help anyway Btw, do you know if you edit the camfocus.3gp , and delete it you lose your warrenty? Will it be possible to put the sound back on it?

Edited by B-M, 07 June 2006 - 04:18 PM.

[eaalb]

B-M, on 2006-06-07 18:14, said:

Ow wait! after the 8 th try it worked! Thanks for the help anyway Btw, do you know if you edit the camfocus.3gp , and delete it you lose your warrenty? Will it be possible to put the sound back on it?

Well, I dó have the problem. I can select the folder 'FS' but nothing happens. Below is my log:

NEW
Open SE Flash Plugin session
Preparing settings dialog
Locating avaiable serial ports:
Found: COM1 ,COM15 ,COM16 ,COM17 ,COM18 ,COM19 ,COM20 ,COM21 ,COM22 ,COM23 ,COM24 ,COM25 ,COM26 ,COM27 ,COM28 ,COM29 ,COM30 ,COM31
Trying to open port: EPIUSB1
Connecting PHONE. ConnType is: DCU
Waiting for 1 bytes
0001 >> 5A
0001 << 3F
Waiting for 8 bytes
0001 >> 80
0001 >> 40
0001 >> 03
0001 >> 01
0001 >> FF
0001 >> FF
0001 >> FF
0001 >> FF
k750 series detected
0002 << 53 37
EPIUSB1: speed changed from 921600 to 921600
Module path: C:\Program Files\Far\Plugins\SEFP\
Sending loader: C:\Program Files\Far\Plugins\SEFP\\BIN\CID00_R2F_id.ldr
QH00 Header: $380
0004 << 51 48 30 30
Wait for EsB
Waiting for 3 bytes
0001 >> 45
0001 >> 73
0001 >> 42
0380 << 51 48 30 30 Lot's and lots of numbers and letters....
Wait for EhM
Waiting for 3 bytes
0001 >> 46
0001 >> 32
0001 >> 30
0001 >> 53
Read of 0003 bytes timed out!
Failed!

[Eggy]

@eaalb

You're from GoT, aren't you?

[eaalb]

Eggy, on 2006-06-07 20:04, said:

@eaalb

You're from GoT, aren't you?

Right-on   
But no fix yet   I'll try a little patience...

[B-M]

eaalb, on 2006-06-07 20:10, said:

Right-on   
But no fix yet   I'll try a little patience...

i'm also from got  

i think you just should try a lot of times.. and then open FS, or connect to another usb port. Like i told, it didn't worked for me 7 times.. Then you open FS and no files are in it, at the bottom there is a line telling: 0 kb in 0files ... maybe still a little bug ?

[Eggy]

B-M, on 2006-06-07 21:18, said:

i'm also from got  

i think you just should try a lot of times.. and then open FS, or connect to another usb port. Like i told, it didn't worked for me 7 times.. Then you open FS and no files are in it, at the bottom there is a line telling: 0 kb in 0files ... maybe still a little bug ?

And you're from Tilburg as well


Perhaps we should create a topic here: "Gathering of Sensors" or "Sensorship of Tweakers". Of course, then I would have to edit all topicstarts on GoT to redirect here

[Bert Trust]

First of all - great job

But - a few problems. I did everything you said in the first post. It found the phone, connected, i have
2 folders - first with "coming soon", second "fs" with ... nothing.
So - i connected my phone (off) to second port with "c" - automatic drivers installation. Then i run Far and after trying to turn the pug-in on ... this is what i get :

Plugin call error
Exception occurred :
"Attempt to write to the inaccessible address 0x9F6E334"
Exception address: 0XC111F6 in module:
C:\...am Files\Far\Plugins\SEFP\sefp.dll
----------------------------------------------------------------
The plugin will be Unloaded!

Tryed to uninstall, and install everything again - no luck - the same error.
Far version from the far site : 1.70 build 2087.

Any help appriciated, i can help if you need more info.

kisses


Edit : Ok - i installed the new dll, the one you provided on the first page - now i have SEFP 2 times on FAR plugin menu- on 0 and 1 (alt+F1) and both works.
BUT - i still have FS directory empty. :<
Forgot to say : i have D750i with the latest firmware (R1BC002 - R1C still not available)

Edited by Bert Trust, 07 June 2006 - 08:53 PM.