15 replies to this topic

[puneet1991]

i have flashed my s500i to w580i firmware
will i be able to use the elves of w580??
is there any guide?

[Boysie]

puneet1991, on 2008-10-30 09:58, said:

i have flashed my s500i to w580i firmware
will i be able to use the elves of w580??
is there any guide?

Have you used the search button!!

Anyway find one here...

http://forums.se-nse...showtopic=31406

Edited by Boysie99, 30 October 2008 - 10:11 AM.

[photographer]

Yes, you can. All w580i stuff will work.


There is a thread for R8BE001 elfs and installation here:

clicky!

or better:
here.

Edited by Photographer, 30 October 2008 - 10:17 AM.

[puneet1991]

thanks guys btw i am using the  R6BC002 f/w so aren't there any elves for this one??
and in case i have to flash it to R8BE001 do i have to flash both the main and fs?

Edited by puneet1991, 30 October 2008 - 10:13 AM.

[KrX]

Photographer, on 2008-10-30 18:08, said:

Yes, you can. All w580i stuff will work.


There is a thread for R8BE001 elfs and installation here: clicky!

That tutorial is (heavily) updated over here.

[puneet1991]

and what about the fimware will they work on mine???
r6bc002

[photographer]

no.

[photographer]

no. r8ba024 or R8BE001 have elfpack, R8BE001 is faster, less bugs, most used, most patches and has updated java platform.


argh! Stupid internet!

Edited by Photographer, 30 October 2008 - 10:40 AM.

[puneet1991]

i have f/w W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn  
and fs  
W580_R8BE001_FS_AMERICA_2_RED52.fbn and i am flashing them right now hope they work..

[photographer]

Yup those are right dont forget ur custompack lol

[KrX]

Yeah don't forget!

[puneet1991]

i did everything and have patched my phone the way mentioned but still can't get it to work
what should i do???
here is what i did
1)switched the f/w and f/s

2)followed this guide to patch the 3 patches given after patching my phone with quick access patch
http://www.akshayy.c...r-db2020-phone/

3)put the elves the way it was mentioned
in the filesystem
but the phone still does not recognizes the elves...  

while installing the patches i think something was not right because setool2lite didn't ask to remove the cable and re insert the battery etc but it didn't show any error either

Edited by puneet1991, 30 October 2008 - 02:49 PM.

[KrX]

For patching you don't need to remove and reinsert as you would with the Quick Access patch.

Try following the tutorials here with JDFlasher.

Quick Access patch with JDFlasher.
Patching in Elfpack

[puneet1991]

this one is for quick access patch i think i have done that allready
is there any tut for normal patching with jdflasher?
and btw
this tutorial on sliderwithstyle says
http://www.sliderwithstyle.com/node/35

"The patch will be then applied. After patching is done setool 2 lite says .vkp executed disconnect phone reinsert battery and start your phone."

which doesn't happens in my phone

[puneet1991]

thanks guys it's waorking now

[KrX]

Do point out any faults in those tutorials if you encounter them.

Thanks for helping us help you help us all.