[mfvamp]

ok well my w580 is debranded, with flash menus and firmware. Recently I realized that my phone wont be recognized by usb anymore, or even with XS++. I have the drivers installed but it still wont recognize the device anymore

Please if someone could help it would be greatly appreciated.

EDIT: 13 views and no replies? cmon people......

This post has been edited by mfvamp: 27 July 2008 - 07:29 PM

[philzfog]

u put flsh usb driver on ur pc ? its here http://forums.se-nse...topic=32103&hl=

[mfvamp]

philzfog, on 2008-07-27 19:35, said:

u put flsh usb driver on ur pc ? its here http://forums.se-nse...topic=32103&hl=

I dont think you understand. Everything was working fine until recently. Now my phone will not even read when I plug it in while its on, let alone XS++. The only way I can transfer files is by taking out my memory stick and using a card reader. Other than that the w580 is not recognized, ive tried other pcs as well..

[philzfog]

is the fastport dirty

[mfvamp]

philzfog, on 2008-07-27 20:04, said:

is the fastport dirty

I dont know what that means :/
How do I check if the fastport is dirty or not?

EDIT: I get this error from XS++ when trying to connect:
22:18:41| Error: Cannot open phone communication port... please somebody help I cant add new flash menus

This post has been edited by mfvamp: 28 July 2008 - 06:23 AM

[steadyontherem8]

The bit that you plug into the phone on the end of the cable.

[mfvamp]

steadyontherem8, on 2008-07-28 09:27, said:

The bit that you plug into the phone on the end of the cable.

well I cleaned the 'fastport' and it still wont connect... this is really driving me nuts.

[KrX]

Tried a different USB port? Tried pluggin' to another com?

Your results from those two should tell you the problem.

IF another usb port works, that usb port/controller is faulty. If the otherr com doesn't work, then it could be your wire/phone.

BUT does it work normally if you plug it in while your phone is turned on?

[mfvamp]

KrX, on 2008-07-29 07:51, said:

Tried a different USB port? Tried pluggin' to another com?

Your results from those two should tell you the problem.

IF another usb port works, that usb port/controller is faulty. If the otherr com doesn't work, then it could be your wire/phone.

BUT does it work normally if you plug it in while your phone is turned on?

I have tried every possible way I could think of. I tried a different computer, different cable. It charges fine so its not the fastport.. And no it doesnt read even if I normally plug in, it just starts charging it. The memory stick can be read only by a card reader, so I transfer files that way. But I cannot access the flash or get any pc to recognize the phone...

[KrX]

Perhaps your wire is =(

Could be just the data transfer pins/wires, but your charging pins are working.

It most probably is though, what are the others' opinions?

[mfvamp]

KrX, on 2008-07-30 07:17, said:

Perhaps your wire is =(

Could be just the data transfer pins/wires, but your charging pins are working.

It most probably is though, what are the others' opinions?

It isnt the wire because I tried my friends cable and it didnt work... This hasnt happened to anyone else? wtf...

[KrX]

Nope...

Then it could be your fastport's data pins...

[mfvamp]

I cleaned the fastport and inspected it, I noticed little marks on the last 4 pins but I think thats just from normal usage. Picture here

[KrX]

Hmm... Your picture isn't that clear. But it probably has to do with your fastport