[YouSmeg118]

20:18:28| XS++ v3.1 (Darwin) Ready !
20:18:28| Executed on Microsoft Windows Vista
20:18:33|
20:18:33| Attempting to open the interface...
20:18:33|
20:18:33| TURN OFF PHONE!
20:18:33| Hold 'C' button on phone and connect phone NOW.
20:18:33| You have 30 seconds...
20:18:33|
20:18:36| Baseband ID: 8040
20:18:36| Protocol Version: 3.1
20:18:36| NEW SECURITY PHONE DETECTED! SWITCHING...
20:18:37| Phone name detected!
20:18:37|
20:18:37| Profiling SEMC phone...
20:18:37| Platform: DB2010
20:18:37| OTP CID: 50
20:18:37| EROM CID: 50
20:18:37| EROM Color: Red
20:18:37| IMEI: 35657301xxxxxx
20:18:37| Phone ID: W810
20:18:37| Region: EUROPE_2
20:18:37| CDA: CDA102494/86 R3A
20:18:37| Firmware Version: R4ED001
20:18:37| EROM: n/a
20:18:37| Ready for operation!
20:18:53|
20:18:53| Sending db2010_db2012_cid50red_flash_r1a002.bin...
20:18:53| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
20:18:53| This is a FLASH loader
20:18:53| Now flashing firmware main...
20:18:54| Flashing c:\users\james\desktop\w810_r4ea031_main_generic_hn_red50\w810_r4ea031_main_generic_hn_red50.mbn
20:18:54| Header type: BABE
20:18:54| 344 flashblocks
20:18:55| Binary acknowledge failed with: 15
20:18:55| Command: Error 0x15
20:18:55| Failed sending flashblock 1. Returnvalue 0xFFFF250B
20:18:55| Finishing flash
20:19:01| Error: Flashing failed
20:19:01| Disconnected... Unplug the phone

The Bold bits were red in XS++

I dont understand why i get this error, can you tell me?

[u2k4009]

Quote

c:\users\james\desktop\w810_r4ea031_main_generic_hn_red50\w810_r4ea031_main_generic_hn_red50.mbn

Long file names can cause problems (once happened when i was using Setool2lite). try to do it agian and place Main in c:\ . there may be the problem with your Main. download a fresh copy from some good source.

if you still get error, then you should use setool