[fungiedcheese]

Well, I used to flash the w810i all the time, but now the z520 just wont flash no matter what I do. This is the log:

14:27:01| XS++ v3.1 (Darwin) Ready !
14:27:01| Executed on Microsoft Windows Vista
14:27:09| 
14:27:09| Attempting to open the interface...
14:27:09| 
14:27:09| TURN OFF PHONE!
14:27:09| Hold 'C' button on phone and connect phone NOW.
14:27:09| You have 30 seconds...
14:27:09| 
14:27:18| Baseband ID: 8040
14:27:18| Protocol Version: 3.1
14:27:18| 
14:27:18| Sending db2010_cid00_prodid_p3l.bin...
14:27:18| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
14:27:18| This is a PRODUCTION_ID loader
14:27:18| Activating GDFS...
14:27:19| Phone name detected!
14:27:19| Restarting phone - please wait...
14:27:19| 
14:27:19| Disconnect phone from USB-port and wait for
14:27:19| further instructions.
14:27:19| You have 10 seconds.
14:27:19| 
14:27:29| Open the battery-cover and reinsert the battery.
14:27:29| Hold C Button on phone and connect phone again.
14:27:29| You have 30 seconds.
14:27:29| 
14:27:33| Baseband ID: 8040
14:27:33| Protocol Version: 3.1
14:27:33| Phone has restarted successfully...
14:27:33| 
14:27:33| Profiling SEMC phone...
14:27:33| Platform: DB2010
14:27:33| OTP CID: 36
14:27:33| EROM CID: 36
14:27:33| EROM Color: Brown
14:27:33| IMEI: 35719700xxxxxx
14:27:33| Phone ID: [hw]Z520[/hw]
14:27:33| Region: EMEA_1
14:27:33| CDA: CDA102436/92   111505
14:27:33| Firmware Version: R3J017
14:27:33| EROM: n/a
14:27:33| Ready for operation!
14:27:40| 
[b]14:27:40| Sending db2010_cid49brown_flash_r5a.bin...[/b]
14:27:40| Prologue: Failed
14:27:40| Error: Cannot send flash loader
14:27:40| Error: Flashing failed
14:27:42| Disconnected... Unplug the phone

I know the bold part shows cid49 brown...which is what I cannot figure out. I am USING a cid 36 FW yet it still gives me that error.

Here is a SS of the files I am using



Someone told me to first convert to the RED EROM and then try flashing it again, even when I do that I receive the same problem. Anyone know a solution?

This post has been edited by fungiedcheese: 10 July 2008 - 06:34 PM

[u2k4009]

XS++ can't deal with BROWN phones. JDFlasher can do BROWN CID 49 flashing. but you have CID 36 !! I think you should update via SEUS. it will upgrade your CID. forgive me if i said something wrong

This post has been edited by u2k4009: 14 July 2008 - 04:12 PM

[u2k4009]

Here you go

follow these steps :

1) convert your CID36 BROWN to RED. Follow this tutorial

http://forums.se-nse...?showtopic=4376

2) Then use JDFlasher to do flashing. It supports db2010 CID36 RED flashing..

[fungiedcheese]

Thanks a bunch guys!!