[chimxinh]

first,sorry my enghlish is bad
my w550 can't come in start phone
I flash main firmware with xs++,and it's ok
but I can't use camera
and,step to step,I use xs++ again
and I don't remeber exactly what I did with my phone,but now,I can't flash system file (FS) apac
I'm from vietnam,I need use FS_apac
but my phone can't
however,I can use main firmware with it...if I use FS-euor or american or cda other not is apac,then flash main firmware apac it see : configure error
I must do ???
help me,plz,mobi doctor's viet nam is not cheapter,and I'm a student man...

[bigbyte]

chimxinh, on 2008-06-29 08:01, said:

first,sorry my enghlish is bad
my w550 can't come in start phone
I flash main firmware with xs++,and it's ok
but I can't use camera
and,step to step,I use xs++ again
and I don't remeber exactly what I did with my phone,but now,I can't flash system file (FS) apac
I'm from vietnam,I need use FS_apac
but my phone can't
however,I can use main firmware with it...if I use FS-euor or american or cda other not is apac,then flash main firmware apac it see : configure error
I must do ???
help me,plz,mobi doctor's viet nam is not cheapter,and I'm a student man...

Can you post an XS++ Log please

[ram_123456789]

Listen if u flash a MAIN.. no major changes occurs...[like your mess and contacts r undeleted.]
but wen u flash the FS all the file system r reset and created according to the FS Firmware..
and u also need to load cust pack for activating your cell..
i think u havnt customize the file system... tats y u get the CONFIG ERROR.
Here The Full Flashing Guide.

Flashing the firmware to your phone: [XS++ v2.2]

1. Connect your phone while holding down the “C” button.
 1.JPG (74.1K)
Number of downloads: 15


2. After your XS++ successfully recognized your phone it will switch to the “Flash” tab automatically.
Check “Flash Main Firmware”, “Flash File System” and “Customize File System”.
 2.JPG (103.92K)
Number of downloads: 23


3. Choose your firmwares and in Customizing File System check for own cust[ack,
then press the “Flash” button.
 3.JPG (109.73K)
Number of downloads: 32

Cust Pack Details

1. Extract the CDA zip or rar file. You will get a folder called tpa.
2. Create a folder called own_custpack in XS++ dir.
3. Copy the tpa folder with its contents into own_custpack folder
4. Like this C:\XS++\own_custpack\tpa\

Download Firmwares
http://share2flash.com/file/11293

just REMEMBER
R4AB048-> R4BA041->R4CA004->R4CB020

Cust Pack
 own_custpack.rar (4.3K)
Number of downloads: 28

This post has been edited by ram_123456789: 29 June 2008 - 10:37 AM