[islander_810]

Hi,
can someone pls post a working sysgfx patch for w800i R1BC002?

All the patches I've come across give me a byte mismatch error in FAR
Or am I doing something wrong?

[amnher]

try using setool2lite

[islander_810]

Hey, thx again for replying. Am trying different tools now. In your experience, will that matter?

[amnher]

yes it will

[islander_810]

I tried setool2lite. I get some patch values differ.
Old wine, New Bottle

[amnher]

Regarding that just continue. I myself with w550i is experiencing that and all went well after continuing

This post has been edited by amnher: 07 May 2008 - 07:50 AM

[islander_810]

My phone is k750i -> w800i R1BC002 CID49 RED, if it helps

[islander_810]

@amnher btw, thx dude. u've been very helpful. I just started modding my phone a couple of days ago. Hence, the many questions.

[amnher]

You can always reflash ur main only if ever problems persist. You have nothing to loose when you apply it. Just try it

[islander_810]

Tried patching with SETool2Lite. Went ahead with it even tho values differ notification came up. Nothing happ. Still stuck with old graphics

[meys@m]

the normal picture ,where saved?

[PabloMDiez]

Some firmwares has 2MB of data more than others.. Maybe you had other firmware and when you flashed it to R1BC002, those unused 2MB of data stills there.. I don't know which was the correct solution. But I think that is your problem.

[islander_810]

meys@m, on 2008-05-07 18:55, said:

the normal picture ,where saved?

I'm using this patch (attached) so I've saved the pngs to /tpa/user/other/gfx

Attached File(s)

•  New_Sysgfx_With_Start_Up_Screens_2.0.rar (1.13K)
  Number of downloads: 87

[islander_810]

PabloMDiez, on 2008-05-07 19:58, said:

Some firmwares has 2MB of data more than others.. Maybe you had other firmware and when you flashed it to R1BC002, those unused 2MB of data stills there.. I don't know which was the correct solution. But I think that is your problem.

So, is there any way out? I had k750i RICA021. Will flashing back to it help?

[meys@m]

islander_810, on 2008-05-08 05:19, said:

I'm using this patch (attached) so I've saved the pngs to /tpa/user/other/gfx

No!
i say the picture that use in phone ,when i don't use gfx patch where saved!
that picture where saved ?

[andrei_3d]

I had some similar problems before, only with other patches! The thing is that you get that missmatch because of your previuos patches (the ones that go between the Main and FS). So, here's what to do:

1. Unzip recoverybin.zip
2. Open recoverybin.exe and drag your Main file into it. The program will create a new Main with a clean section of FFFFFFFF... between the Main and FS, called the same as your original file, only with "RECOVERY" in the end of the name
3. Flash this new Main to your phone
4. Now you can enjoy any patch you want!!!

Good luck!

Attached File(s)

•  recoverybin.zip (3.88K)
  Number of downloads: 62

[kirpeace]

andrei_3d, on 2008-05-08 22:10, said:

I had some similar problems before, only with other patches! The thing is that you get that missmatch because of your previuos patches (the ones that go between the Main and FS). So, here's what to do:

1. Unzip recoverybin.zip
2. Open recoverybin.exe and drag your Main file into it. The program will create a new Main with a clean section of FFFFFFFF... between the Main and FS, called the same as your original file, only with "RECOVERY" in the end of the name
3. Flash this new Main to your phone
4. Now you can enjoy any patch you want!!!

Good luck!

thanks very much

[Ronin420]

Cool, will try that.

Pls clarify two things for me.

1. How does stuff between main and fs get affected? Apart from sysgfx, I haven't come across any patch which changes that area

2. How is this different from simply flashing with main? In either case, we'll be wiping out existing data and writing new data

Thx...

This post has been edited by Ronin420: 08 May 2008 - 05:37 PM

[andrei_3d]

1. There are quite a lot of patches that go beyound Main's flashing area, such as masterpatch, advanced range of brightness for display, API and many many others. If you open your patches with notepad you will see that some of them have a lot of "FFFFFF..." in them, so that means that area was empty. Probably you had this kind of patches on your K750, so when you changed from K750 to W800 firmware some parts of them remained, and now they're messing your W800 ones.

2. Because Main files are different in size (depending on version and language pack), there's an extra available flashing area between Main and FS that it's untouched (FFFF... area) when you flash your phone. This area is used by sysgfx patch and the patches mentioned above. So, this new Main includes that flashing area (you will see that it's size will be greater, because after the Main's usual code, it has FFFFF... written till the starting address of FS).

[Ronin420]

@andrei_3d thx for the clarification.

I went to command prompt and typed recoverybin.exe <name of main file>

It created, like you said, a file with recovery at end of name. This is a .mbn file. When I try to flash using file and XS++ I get an error saying

Binary acknowledge failed with: 15