[zimara]

I tried to convert K750 --> W800. i got the main and fs files req. i have a k750 CID49 red (EMEA_6). when i clicked on flash main using XS 3.1 (Darwin). i got following log:

22:06:25| XS++ v3.1 (Darwin) Ready !

22:06:25| Executed on Microsoft Windows XP

22:06:29|

22:06:29| Attempting to open the interface...

22:06:29|

22:06:29| TURN OFF PHONE!

22:06:29| Hold 'C' button on phone and connect phone NOW.

22:06:29| You have 30 seconds...

22:06:29|

22:06:35| Baseband ID: 8040

22:06:35| Protocol Version: 3.1

22:06:35|

22:06:35| Sending db2010_cid00_prodid_p3l.bin...

22:06:35| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

22:06:35| This is a PRODUCTION_ID loader

22:06:35| Activating GDFS...

22:06:35| Phone name detected!

22:06:35|

22:06:35| Profiling SEMC phone...

22:06:35| Platform: DB2010

22:06:35| OTP CID: 49

22:06:35| EROM CID: 49

22:06:35| EROM Color: Red

22:06:35| IMEI: 35255701xxxxxx

22:06:35| Phone ID: K750

22:06:35| Region: EMEA_6

22:06:35| CDA: CDA102337/103 R3A

22:06:35| Firmware Version: R1CA021

22:06:35| EROM: n/a

22:06:35| Ready for operation!

22:07:26|

22:07:26| Sending db2010_cid49red_flash_r2b.bin...

22:07:26| Applet ID: 051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B

22:07:26| This is a FLASH loader

22:07:26| Now flashing firmware main...

22:07:27| Flashing c:\downloads\w800_r1bc002_main_eu_emea.bin

22:07:27| Header type: BABE

22:07:27| 291 flashblocks

22:07:27| Binary acknowledge failed with: 15

22:07:27| Failed

22:08:02| Error: Flashing failed

22:08:02| Disconnected... Unplug the phone

22:10:10| Shutting down...

22:11:45| XS++ v3.1 (Darwin) Ready !

22:11:45| Executed on Microsoft Windows XP

22:11:57| Shutting down...

After i got Binary acknowledge failed with: 15 i disconnected the phone as i saw somewhere in the posts that it will get hanged on flashing 1 of 291 and will get stuck there.
should i change the options to breakin in XS++ or i wont be able to flash the phone at all.
PLZ HELP!!!!!!!!!!!!!!!!!!!!

[alicia]

correct me if im wrong
but main file should end wit .mbn
n fs file should end wit .fbn
i think tat xs++ doesnt support other formats

[zimara]

no .bin files are also supported i think. cause if u use GFlash it makes .bin files and in tut links GFlash was used for applying patches. However i found only .bin files for f/w

This post has been edited by zimara: 14 February 2008 - 07:17 PM

[alicia]

bin files im not sure
cuz im usin .mbn .fbn files for xs++ only
but from ur log
it seems its not workin wit .bin files
cuz i last time press wrong n use a .zip file
it also came out somethin like tis

This post has been edited by alicia: 14 February 2008 - 07:30 PM

[zimara]

you got the same error Binary acknowledge failed with: 15

[alicia]

i forgotten
but its somethin like tat
definitely got the error

[reactos]

you can find mbn and fbn files here http://www.share2flash.com/

[zimara]

Any of you never experienced this error.................Plz help

[reactos]

zimara, on 2008-02-15 15:58, said:

Any of you never experienced this error.................Plz help

should i change the options to breakin in XS++ or i wont be able to flash the phone at all.????? how old xs++ version do you have?
the file is maybe encrypted. files that are encrypted will fail when you try to flash them.

This post has been edited by reactos: 15 February 2008 - 05:03 PM

[zimara]

DONE FINALLY.............. I THINK. found the error in XS++ FAQ link. i slided the dwloaded firmware using GSlide then flashed the fone using XS++ 3.1. But i still have some doubts can anybody can help me with it:
1. when i now cnnct the fone via XS++ it still shows connected K750 CID 49. so is my fone fully converted to W800.
2. PC suite also shows connected K750. should it change
3. i not able to use the artists option in Walkman player options it shows: no albums found, although all tracks are shown and played. i just inserted the mem card after flashing.
4. will the acoustics and cam drivers be of W800 or the one which i uploaded before flashin. i think it will of W800 only
This is log after flashin
14:53:09| XS++ v3.1 (Darwin) Ready !

14:53:09| Executed on Microsoft Windows XP

14:53:13|

14:53:13| Attempting to open the interface...

14:53:13|

14:53:13| TURN OFF PHONE!

14:53:13| Hold 'C' button on phone and connect phone NOW.

14:53:13| You have 30 seconds...

14:53:13|

14:53:19| Baseband ID: 8040

14:53:19| Protocol Version: 3.1

14:53:19|

14:53:19| Sending db2010_cid00_prodid_p3l.bin...

14:53:19| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

14:53:19| This is a PRODUCTION_ID loader

14:53:19| Activating GDFS...

14:53:19| Warning: IMEI name does not match GDFS name (IMEI:K750 GDFS:W800)

14:53:19| ...using IMEI name

14:53:19|

14:53:19| Profiling SEMC phone...

14:53:19| Platform: DB2010

14:53:19| OTP CID: 49

14:53:19| EROM CID: 49

14:53:19| EROM Color: Red

14:53:19| IMEI: 35255701xxxxxx

14:53:19| Phone ID: K750

14:53:19| Region: EMEA_6

14:53:19| CDA: CDA102430/6 R2A

14:53:19| Firmware Version: R1BC002

14:53:19| EROM: n/a

14:53:19| Ready for operation!

14:54:14| Sendinging shutdown signal to phone...

14:54:14| Done.. You may now connect again...

14:54:14| Shutting down...

[ram_123456789]

me too same problem...

after crossflashing... any patching makes the cell dead !!

need help

[KK§cchaos]

ram_123456789, on 2008-09-06 18:47, said:

me too same problem...

after crossflashing... any patching makes the cell dead !!

need help

Did you flash your FS as well?