SE-NSE Forums:

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic
  • Bookmark

W850i Dead :/ Rate Topic: -----

#1 User is offline   tezio Icon

  • n00b
  • Group: Members
  • Posts: 2
  • Joined: 31-January 08

Posted 31 January 2008 - 01:41 PM

Hi there :) it's my 1 post so HELLO to Everyone :)

first post first problem :/

my friend was playing with his w850i and now it is not respoding :/

the point is that he wrote GDFS from his backup but nothing still happened so he wrote clean GDFS for w850i and now mobile is no responding to charger power button etc.

we can't connect with C button to any flash programme. only with 2 + 5 buttons . I wanted to write his GDFS from backup but setool2lt says that there is :

Setting up GDFS...
will write 1578 variables
No ack during wr_gdfs command, halt
FAIL: gdfs blk/unit:0/0002

then I tried to repair erom but there is :

ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3528xxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:46 secs.


Help I don't know what to do....
0

#2 User is offline   drdre20013 Icon

  • Makes Se-nse
  • PipPipPipPip
  • Group: Members
  • Posts: 445
  • Joined: 24-July 06
  • Gender:Male
  • Mobile:K800i, W580i

Posted 31 January 2008 - 03:39 PM

You will need to use a service cable to write the security units back to the phone, A clean gdfs doesn't have the security units as they are phone specific. When i had a problem with writing my gdfs backup i was using the write gdfs button in setool and it was giving me an error so i used the write script button instead and that done the trick.

This post has been edited by drdre20013: 31 January 2008 - 03:40 PM

0

SE-NSE

#3 User is offline   tezio Icon

  • n00b
  • Group: Members
  • Posts: 2
  • Joined: 31-January 08

Posted 02 February 2008 - 09:30 AM

View Postdrdre20013, on 2008-01-31 16:39, said:

You will need to use a service cable to write the security units back to the phone, A clean gdfs doesn't have the security units as they are phone specific. When i had a problem with writing my gdfs backup i was using the write gdfs button in setool and it was giving me an error so i used the write script button instead and that done the trick.



I tried with write script and I got this :


ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35282601346408 CERT:RED
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Will execute script now.
Phone detached
Elapsed:53 secs.


and still nothing :/
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic
  • Bookmark

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users