[moonwarrior1]

Hello there, I have come to your rather knowledgeable board via an excursion from Google looking to see what I can do to increase the audio output (acoustics) for my Sony Ericsson w810i.

I am familiar with the risks of bricking as I have moded my PSP before. and I’m good at following detailed instructions.

I spent the last hour attempting to search through this site and sit here in wonder at the extent of info.

I'm a techy and have had lots of fun with moding my different devices though I hadn't really thought about my cell phone as modable (don't ask Just never really thought about it). Anyway to get to the point as most have no doubt found the w810i is very poor for sound output. (Noisy bus and can’t hear the person on the phone at all) so my primary goal would be to up the audio but if it is more feasable (or probaly better over all) to just flat out mod it that works too.

These are the files and links I found
I have found the 810i signed usb drivers (not clear yet what they are needed for)

I have found the w810i Accoustics file (sounds.rar) as well as Rakista’s acoustics
http://forums.se-nse...rt=#entry173338
but not sure which is the better choice to work from.

and also the "XS++ v3.1" Firm ware program. However I'm stuck at figuring out which guide is relevant or would be the best to follow for me mainly wishing to just alter the sound at this time. (However I am suspecting that it’s probably a complete firmware alteration I’ll have to do)

I found one guide that refers to some of a direction but not sure if this is what I should be using

http://forums.se-nse...&...cs&cal_id=0


And finaly I found this “all in one mod” for my phone. that looks rather interesting
http://forums.se-nse...showtopic=14615 SE-NSE ModPack v1.0 FINAL

Any sugestions? or helpful advice to point me into the right direction would be muchly appreciative.
Derek

[Ciggy]

in short do a full mod. install the USB drivers. this allows the phone to be detected as a flash device. next install XS++ v3.1 and connect to it and let us know what firmware your phone has.

[moonwarrior1]

Okies so the Usb drivers same as on my cd, here I've been thinking they where an extra for the actual phone somewhere (duuuh) and the files i've been adding on memory stick before so I am familar with that process.

Ran the program here's the results most you probaly don't need but better to be consistant

19:17:14| Baseband ID: 8040
19:17:14| Protocol Version: 3.1
19:17:14|
19:17:14| Sending db2010_cid00_prodid_p3l.bin...
19:17:14| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
19:17:14| This is a PRODUCTION_ID loader
19:17:15| Activating GDFS...
19:17:15| Phone name detected!
19:17:15|
19:17:15| Profiling SEMC phone...
19:17:15| Platform: DB2010
19:17:15| OTP CID: 49
19:17:15| EROM CID: 49
19:17:15| EROM Color: Red
19:17:15| IMEI: 35657401xxxxxx
19:17:15| Phone ID: W810
19:17:15| Region: ROGERS
19:17:15| CDA: CDA102494/128 R6A
19:17:15| Firmware Version: R4ED001
19:17:15| EROM: n/a
19:17:15| Ready for operation!


Thanks for your help.

This post has been edited by moonwarrior1: 17 December 2007 - 01:01 AM

[Ciggy]

ok... so what exactly do you want to do with your phone? what do you want it to do?

[moonwarrior1]

Well my primary goal is to get the sound to actualy hear a person on it properly.

from what else I read on here there are alot of features that are available but mostly just hinted at (I've got alot of surfing to go i guess)

Some nice things I wouldn't mind is the camera sound removed, fast forward (faster) in any videos I play (just read about that one).

Other then those three I don't know the full benefits I can get by modding my phone. though i'm not against alot of stuff to tinker with the sound would be the primary reason to up it, plus to play music louder would be nice.

What would your recomendation be?

Derek

[Ciggy]

surf the topics in customizing firmware. look for W810i acoustics, get setool2 lite, search for cam drivers (recommended sarmads 5.8 driver) and check the W810i patches topic. i can't write the instructions what to do because i'm feeling very sleepy... it's like after 9 PM here

[moonwarrior1]

Thanks for the replies,

I appreciate the direction to look and the info in general.

If you think of anything else I should consider don't hesitate to sugest it,
Pleasant dreams.

Derek

[moonwarrior1]

Ciggy when you have time would you give me a bit more of a hand,

I've found "http://forums.se-nse.net/index.php?showtopic=11580"

W810i Acoustic Mix

I tried downloading the newest file " TVH_v8.rar ( 57.38K )"

But obviously I'm missing a step on how to merge it onto my phone, this leads me to a a few questions that you can answer tomorow if you'd like

1)Do I have to "modify my phone first before using patches / or updates such as this?
2) would I not use a different program besides XS++ v3.1 (which from what I read is a complete flasher not an editor, and what I "think" i want is to replace some files?
3) if I was too download a "patch" what do I have to watch out for? that it's compatible to my firmware version? R4ED001

~continues to dig through these posts trying to gain an understanding~

Derek

[Ciggy]

1. nope... wait, where are you from? Canada? i'll be able to help you fully if you tell me what i need to know. i need to know this so i'll know what firmware you should use.

2. ummm... download FAR Manager and SeTool2 lite 1.08

3. your FS (File System) is R4ED001 so i guess your Main firmware should be R4EA031 but when you get setool2 lite let me know. you apply patches to Main not FS.

[moonwarrior1]

Thanks for the info again. I am from Canada, Ontario

I have the following files.
Far manager + SEFP010044.zip + sefp010051.rar + db2010cid49_4_alpha.rar.zip
(I have not installed these plugins yet but from the looks of this one page I'm sugested too)

Saved : setool2lite.rar

Main / Fs are the two locations for flashing on my phone correct?

Thanks again, I have to head to work now but I will check forums this evening.
Derek

[Ciggy]

ok, yes the Main is like the OS in your pc and the FS is like your Hard drives (in computer terms) and your custpack can be compared to WINDOWS folder (in windows pc).

[moonwarrior1]

Do I instal both those patches? What other information should I get for you?

Far manager + SEFP010044.zip + sefp010051.rar + db2010cid49_4_alpha.rar.zip
(I have not installed these plugins yet but from the looks of this one page I'm sugested too)

should I be downloading any other fiels? when do I integrate this into my phone? TVH_v8.rar ( 57.38K )" - Sound Acoustics

Derek

[moonwarrior1]

Hello once again,

I've installed far manager without any plugins that where downloadable seperatly. I instaled setools2lite and nearly had heart failure when it started accessing my phone and suddenly my phone stoped working all together.

Fixed that so it's back to as before. I assume I either stoped it at wrong point or had wrong phone selected.

So now that I have this program on my pc and accessible. What information do I need to do for the accoustics?
(I'm also going to check see if I can figure this out myself but your expert opinion would help me greatly here.

Derek

[Ciggy]

read this topic on how to upload files with it SETool2 lite

read how to access your FS with FAR Manager FAR Manager

and also here's a guide to uploading files using XS++ v3.1
Uploading files using XS++

if you need help with flashing, i'll gladly help you. but it doesn't make sense that i write a full tutorial for you if there are so many, which is why i gave you the links above.

[moonwarrior1]

Hey man thanks! those are just what I need to gain a proper understanding to not screwing my phone up seriously. I'm just way too newbish and way too much info without a few good pointers. and a nudge in the right direction I should be good with those links.

Once again thanks alot I realy appreciate the help
Derek

[Ciggy]

if there's no tutorial for something i don't mind explaining it. what else you need to know. for the acoustics, search the members and find TVH, hyper_t or ToShaRa. they make good acoustics for our phone.

[moonwarrior1]

Hello Ciggy or anyone else looking along the lines of what I have, This is what I've done / found and notes for myself so far.

Notes of my processes if anyone interested:

1) ran and installed XS++ v3.1 to find out some phone info
2) installed usb drivers (Same as are on sony cd)
3) ran XS++ program and turned phone off holding C pluged the usb cable in
4) copied the info Important info seems to be the
"Firmware version"(R4EA031 or R4DB005 (Maybe others I don't know)) and the
"security level" Eprom CID= 49 (highest security at this time I guess)
5)Done with this program so unplug usb and close the xs++ program

So now that I had that info I had to find out how to "patch" my phone accorden to Ciggy
i should use setool2 lite The below link refers to that page
http://forums.se-nse...amp;mode=linear

I downloaded and installed it but I was very confused on the steps to take, and actualy
killed my phone for a minute there so deffiently be very carefull.

6) Run setools2light after extracting to a folder
7) Backup your GDFS info Click on the READ button (Read means backup) (write means

flashing GDFS) Make sure you follow the instructions carefully and WAIT for the backup

to complete The process involved was click on read GDFS button, hold down C on phone and
connect the ubs cable.
I also made sure to do a "Read flash" backup as well. these files are stored in the
extracted folder of setools2light 2 (BIN) files save these somewhere as a backup for the
future.

Now comes the fun part. Finding a patch that is for your "firmware version" as well as
a patch that you want to implement on your cellphone. in my case I chose a simple

alteration of the battery icon to purple so that I could see right away if my flashing
worked.

8) View this forum for an image that shows the "steps" to follow.
http://forums.se-nse...showtopic=13159 ( Reading this post helped me alot)

9) extract the "patches" for your firmware model to a folder that you can easily browse

to. This is where I found the ones that I was using:
http://forums.se-nse...showtopic=13164
http://forums.se-nse...showtopic=15026 (Description and download)

I chose the w810i_patches_26.08.07.rar ( 26.03K ) saved and extracted to a folder
on my desktop.

10) opening up setools2light if it was not already open.
11) choose your phone model exactly (I almost bricked my phone cause I didn't)
12) under Misc files click browse and choose the "VKP" file in the folder you extracted.
(In my case on the desktop) then
13) click on the "Write script button"
14) you are asked to plug the phone into the usb cable as well as holding down C.
15) WAIT till told to remove battery unplug usb remove battery Connect usb cable and

click ready.
16) you will be asked do you wish to apply patch or remove patch. (Apply ='s no)
Now done


:-/ Still trying to figure out how to integrate (I can access the files via the tutorial you linked me but I don't know where I should be merging the files into. or where to create folders if needed.) I have the two driver files but no clue where to put it lol.

Acoustics I chose: (hyper_t's driver)
http://forums.se-nse...mp;#entry144274

Camera Drivers I chose:Sarmads 5.8 cam driver

Yah sorry for long winded but figured no harm in posting what I have learnt/links I found most useful.

Ciggy where can I get the sarmads driver? (NVM I finaly found it ) and the files for these patches I can't download any other links you might know?

Changes the recorded video files extensions from 3gp to mp4
Moves acoustic driver to memory stick
Remove high volume warning message on ringtones
Changes all system sounds extension to mp3 (Download link here);
Enables fast forward/rewind of mp3 and video files on mediaplayer (Download link here);
Enables missing calls reminder with glowing flashlight & vibration (Download link here);

This post has been edited by moonwarrior1: 18 December 2007 - 05:45 PM

[Ciggy]

that chagning extension from .3gp to .mp4 doesn't work well. remove that. my advice make sure your Main firmware is R4EA031 Main Generic because that is the most patchable Main. and ever so often go in today active topics on the home page and click on W810i patches (that's topic is always active) and most of the patches posted there are for R4EA031 Main Generic.

don't bother with the read flash function it doesn't make sense for us W810i users because it's just safer to flash your Main and apply over the patches you want. the read flash function is to make a backup of your Main.

This post has been edited by Ciggy: 18 December 2007 - 05:53 PM

[moonwarrior1]

Okies I have succesfully updated the main goal that I had been so confused on.

Using this link you gave " http://forums.se-nse...mp;#entry188402
as well as the XS++ program for modifying

The key that actualy helped cause none of the actual forums i have viewed actualy mentioned this.
(Hyper was so kind as to actualy provide the file path to the folder as his directory structure for copying the file over)
hyper_SE-NSE_acousTic_v6\ifs\ifs\settings\acoustic

Once I figured out that the "IFS\settings\accoustic" refered to the location on the cellphones directory structure I just draged and droped the files and it auto deleted and copied (Another thing not mentioned).

and of course the camera driver is located there as well (it's own folder) so that solved two problems all at once.

Oh and the read function was cause i wanted a backup.

Thanks for the info on the mp4 issue.

As for that main site i assume it is this one " http://forums.se-nse...showtopic=15026 " w1810i VKP Patches" and that 's the page I was refering to with the links not working.


Well I am happy, my priority was the acoustics and I muddled my way through that one finaly. I did the cam driver but I haven't played with it too much yet. Added just a battery patch and the radio patch. the only other one I might want for sure is the faster fastforward/rewind if i play a video.

Thanks for the general nudges plus about 6 hours atleast of researching and cross referencing i did what I set out to do. I hope the posts further up that I did of all my steps helps someone if they are having the confusions that I did.

Peace out,
Derek

[Ciggy]

this is the site i was talking about... W810i Patches

the reason i made you made thos threads is that you would get a full understanding of what those software can do apart from just uploading files. and also to increase your understanding of modding so you could help others as well. again i must say that you should back up your Main... it doesn't make sense. plus the base address is the same but the length varies so that's why no one really recommends backing up patched W810i Main.