[brazzuka]

number1, on 2007-11-27 18:55, said:

@ BrAzUkA

ur driver is very very buggy not much works pictures aren't very good, i went through ur driver in notepad i don't understand the w200i driver much but it's full of useless sh*t that doesn't work, u have replaced zoom brightness exposure properties with properties that don't work why????
also u have loads of settings from k750i supermode drivers why it doesn't work??????, but the colour correction does work and it works very well.
i decided to mod ur 2.85 so at least it's usable, i recommend u use it as a template for ur future drivers cause it works and it does automatically update the exposure.

the driver i attached is modded for w300i but copy & paste a w200i power-on off seq into it it will work fine on w200i, my attached driver takes nice outdoor pic but it has loads of noise but everything works fine feel free to use it and mod it to reduce the noise it's an idea for ur 2.9 driver i hope it helps.

Number 1

Good work Number one 1 and good initiative to help with the cam drivers but actually is needed to help further reduce the noise of phtos.Not know if it is possible because I believe that in this capacity maxima of driver. Tested a speed of the video recording of 20 fps and hardware w200 not accepted.
Help is always welcome

Sharing knowledge in pursuit of development

[number1]

brazzuka, on 2007-11-28 15:25, said:

Number 1

Good work Number one 1 and good initiative to help with the cam drivers but actually is needed to help further reduce the noise of phtos.Not know if it is possible because I believe that in this capacity maxima of driver. Tested a speed of the video recording of 20 fps and hardware w200 not accepted.
Help is always welcome

Sharing knowledge in pursuit of development

i don't know how to reduce noise on the w200i, i don't understand the w200i driver that much,
so 20fps doesn't work have u tried 15fps or if that doesn't work 12fps,

[ursamajor]

I'm 100% sure that you cannot "teach" W200i to shoot 20 fps videos by modifying the driver. You MUST rewrite the codec settings, in the firmware, i believe.

This post has been edited by ursamajor: 28 November 2007 - 08:37 PM

[brazzuka]

number1, on 2007-11-28 13:34, said:

i don't know how to reduce noise on the w200i, i don't understand the w200i driver that much,
so 20fps doesn't work have u tried 15fps or if that doesn't work 12fps,

But you do not know the properties or to change the values of writing fps video? Because it has information that you number 1 already modified some drivers ... series K and W or not.

Ursa
I do not know if adding line programming firmware in the w200 change anything, it sometimes is not only in the programming, but at the physical limits that the very things

This post has been edited by brazzuka: 28 November 2007 - 09:07 PM

[formaldehit]

Very Thanks, @Brazzuka

[brazzuka]

sanal47, on 2007-11-28 05:26, said:

ok well here it is, original display driver for backup

Sanal


If you want to be to post the cam drivers brazuka's on page http://topse.ru
U can

Any file you want to post on HD http://sonyericssonw...il.4shared.com/ or acoustic drivers your sanal or other acoustic post here in the sen-nse that upload for sonyericsson HD

Tnks

[brazzuka]

Someone has full backup of any cellular carrier to w200?
Full backup MAIN and FS carrier

example:

Full backup carrier Claro
Full backup carrier Movistar (Vivo)-Telefonica
Full backup carrier Tim
Full backup carrier Oi
Full backup carrier Vodafone
Full backup carrier anyelse carrier...

[sanal47]

brazzuka, on 2007-11-28 22:45, said:

Sanal


If you want to be to post the cam drivers brazuka's on page http://topse.ru
U can

Any file you want to post on HD http://sonyericssonw...il.4shared.com/ or acoustic drivers your sanal or other acoustic post here in the sen-nse that upload for sonyericsson HD

Tnks

sorry cant upload can u please upload my mods i have posted links in my signature..

[sanal47]

wasi_w200i, on 2007-11-28 11:04, said:

hey sanal how did u remove the operator logo and changed the menu icons to vista? could u give "pictured" tutorial?

open layout and find status indication and change values "title mode" to 4 thats all operator logo will be deleted and for icons see my signature for menu just upload it sorry exams are going on will give tutorial later...

[alexherdea]

If u are having trouble finding the right CXC rest file from se-tool, then take a look here

[hyper_t]

I just want to contribute my v6 acoustics re-packed for w200 handset, with 3 extra files added. Fixed FM balance, quality headset and louder backspeaker.

If you have installed other acoustic packs not for w200, make sure to delete the extra files from your acoustic directory before uploading this pack.

Enjoy!


Note: This pack has loud headset files, please do not play in max volume. It might damage your headset and your ears as well.

This post has been edited by hyper_t: 29 November 2007 - 11:37 PM

[wasi_w200i]

after i used the vista menu, my radio says operation failed and does not respond. what should i do??

[yousey]

[Removed the huge quote, not necessary and makes the page hard to navigate ]

Hi,
I'm stupid i guess,
But where do i have to put these patches?
And with what program?
:$
Many Greets=D

This post has been edited by Sammyboy: 30 November 2007 - 03:24 PM

[alexherdea]

yousey, on 2007-11-30 08:39, said:

Hi,
I'm stupid i guess,
But where do i have to put these patches?
And with what program?
:$
Many Greets=D

u have to copy one of the text's above ,and past it in Notepad , then save as *.vkp file. To use those patches u need Se-tool . In se-tool there's a field called Misc -> u pot the vkp there , and after u press Write Script

p.s : don't quote such huge amount of text again

later edit : i've modified the tutorial to be more explicit about how to add patches ( *vkp files )

This post has been edited by alexherdea: 30 November 2007 - 12:23 PM

[alexherdea]

Can anyone help me with the menu option "My friends" from the Messages ( messaging -> my friends )
Let's say i'm using a yahoo account , how can i modify the fields so the next time i enter , i will be logged in ?

[yousey]

alexherdea, on 2007-11-30 13:15, said:

Okay,
But for example
;W200_R4JA011
;radio without headsets
;(Ñ)Phenomen
;(p) gral_lee
+44140000
133AE14: 01D1 01E0
I copied this one,
And saved it as a .vkp
I load it into Se-Tools, misc, & Pressed Write Script, Pressed No, To apply
But nothing is happening,
I got the R4JA011 Firmwire
But it isn't helping,
And i was wondering, To Get all the W200 Cam drivers,
And take picture's of the same things, With other drivers,
So we could see the difference should this be helpfull?

[fadidraghici]

PROBLEM: I copied the flash file .swf to the phone directory (tpa/preset/system/desktop/flash) but it wont appear in the themes menu, what should i do?

[yousey]

fadidraghici, on 2007-11-30 15:50, said:

PROBLEM: I copied the flash file .swf to the phone directory (tpa/preset/system/desktop/flash) but it wont appear in the themes menu, what should i do?

Well,
To activate Flash (.swf) Theme's You must have the "Original Theme"
For Example,
Blueorbit.swf
Blueorbit.thm

Just search for the Thm file;)

[bradleyretro]

if u try to load too many flash menus swf.? and u run out of space dp you have to re-flash? if yes how do i do this plz <<<noobie

thx

This post has been edited by bradleyretro: 30 November 2007 - 10:23 PM

[brazzuka]

Acoustic Drivers

-ToShaRa_Mega_AcoustiC
-RaKisTa
-Shadow's Acoustics MIX
-SmellULaters_ultra
-megabass hybrid
-hyper_SE_NSE_acousTic_v6_
-Black_Ice_WOW_I
-Acoustic Mix W200
-Acoustic_Mix_By_Black_Ice_
-Dmitogor v1 zapf
-HOT Acoustic
-Sanal47__s_acoustics_
-Advanced_W200_Bass_
-Advanced_W200_Canavar-Bas0
-acoustic Toshady v1.3 Platinum

Much More Acoustic

HARD DISK SONY ERICSSON W200