[number1]

wot u will need
farmanager from www.farmanager.com or http://www.4shared.c...Manager170.html
sepf 10.0.44 from http://www.4shared.c...SEFP010044.html
sepf 10.0.51 from http://www.4shared.c...SEFP_01051.html
db2012 & db2020 boot scripts (SEPF) from http://www.4shared.c...f1e26/SEFP.html
xml source generator from http://www.4shared.c...eGenerator.html
usb flash drivers from http://www.4shared.c...d/gg-setup.html

a.to install the usb flash drivers download the .exe file and run the it

Before following this guide please have a full battery 90-100% and have usb flash drivers installed

1.install farmanager
2.go to programme files/Far/plugins
3.extract sepf 10.0.44 here
4.now extract sepf 10.0.51 in extactly the same place as 10.0.44
5.enter the SEFP folder and run sefp0.10.0.51patch.exe
6.now download SEFP.zip and extract the files to /Far/plugins
7.now run farmanager and press F11
8.select SEFP 0.10.51 FAR should look like
9.select DCU-60 under device,921600 under speed,then ur phone e.g db2020 cid:52 (u can use xs++3.1 to find this out and remeber to use erom cid)
10.press enter the matrix
11.u should see this
remove battery for a few secs and then reinsurt it and do what is says connect cable holding down C.
12.u will now see
13.click on FS
14.now wait a few minutes while it loads everything
15.now u will see
16.now browse around clicking the folders (.. above the folders is back), find wot file(s) u want to copy off. ifs,contains camdriver acoustics etc. tpa contains layout,menu etc. F8 deletes stuff if u find anything u don't want.
17.when u find wot file u want too copy off make a note of the path, use the right side of far too browse where u want too copy it to, then select the file u want copyed and press F5 then press copy copy off all the files from the same folder u want, it will write a 0byte files but this is ok.
18.now to disconnect from far safely, keep clicking back (..) until u see this then click yes and disconnect ur phone, now do step 33
19.now run the xml source generator
20.and copy usb/other/ in the Enter destination box like this
21.press "select files that will be copied to the phone" then select all ur 0 byte files that u copied off with far
22.now type in the path of the files in the "Enter copy source" box u should have made a note of the path e.g tpa/preset/custom,
NOTE: Too copy stuff from the ifs folder you must use capital letters e.g IFS/SETTINGS/ACOUSTIC
23.now press "Generate XML source"
24.press "save as"
25.for file name type customize_upgrade.xml, it's very important u name it that
26.press save, save it somewhere easy to find
27.now follow steps 7-15 again
28.go to tpa/preset/custom
29.with the right side of far find ur customize_upgrade.xml
30.now highlight click it and press F5 then press copy
31.customize_upgrade.xml should now be in tpa/preset/custom on ur phone
32.follow step 18 again,
33.take out the batter then re-insurt it after a few secs,
34.now turn ur phone on, it will say "please wait" for about a minute leave it.
35.the file should be copied from the phone FS to the phone memory in the other folder.

This post has been edited by number1: 29 December 2007 - 03:24 PM

[silentser]

hi, in step 5, i couldn't find where is the patch

This post has been edited by silentser: 22 October 2007 - 04:28 PM

[chris_b0ss]

you must download sepf 10.0.51!!!!!is at start of topic...good tuturorial btw!!

This post has been edited by chris_b0ss: 22 October 2007 - 04:23 PM

[endz]

is this really work?

[number1]

endz, on 2007-10-26 12:25, said:

is this really work?

yea corse it works, links are down at the moment i'm having trouble with 4shared

[bracksisahobo]

Not bad!

[photographer]

Yay Thats great stuff mate. should be stickied

[number1]

links working again

[bojinx]

number1, on 2007-10-26 10:59, said:

links working again

nice tutorial number1
it is a nice guide to a noob like me.
thanks mate!!

[cRuNcHiE]

I cant get this to work with my k770i?

It does the please wait but i cannot see the files in the Other folder?

I can see them in usb/other in far manager though?


EDIT:

I believe on my phone it needs to goto tpa/user/other that worked

This post has been edited by cRuNcHiE: 26 October 2007 - 07:38 PM

[number1]

cRuNcHiE, on 2007-10-26 19:59, said:

I cant get this to work with my k770i?

It does the please wait but i cannot see the files in the Other folder?

I can see them in usb/other in far manager though?

can u post up the customize_upgrade.xml

[chris_b0ss]

hey number1 i ''stole'' the link for usb flash driver for you..hope not to be angry....you were added on thanks list...don't get angry please.

This post has been edited by chris_b0ss: 26 October 2007 - 07:38 PM

[number1]

chris_b0ss, on 2007-10-26 20:38, said:

hey number1 i ''stole'' the link for usb flash driver for you..hope not to be angry....you were added on thanks list...don't get angry please.

i don't mind

[unsel2004]

silentser, on 2007-10-22 16:15, said:

hi, in step 5, i couldn't find where is the patch

hi
sorry for my bad englisch,i came from germany.i have downloadet the files,and im not found the patch..

can i help whou found the patch?

unsel

[number1]

unsel2004, on 2007-10-27 10:33, said:

hi
sorry for my bad englisch,i came from germany.i have downloadet the files,and im not found the patch..

can i help whou found the patch?

unsel

whoops i forgot to upload the patch, link updated

[sanzou]

hey ... it is not working for me .... there no 'please wait' screen .... there's nothing at my other folder ....
how do you do that ?


EDIT: Now working ... =) i use default_upgrade.xml instead of customize ....

This post has been edited by sanzou: 01 November 2007 - 04:44 AM

[francoisrobb]

Hey,

I need some help, I looked in xs++ and it said my phone is DB2020 CID 51 so I opened far manager with bootscript db2020_51.

When I tried to open FS, I got a message saying it failed with error 0.
Here is the log. Any help would be appreciated...

Open SE Flash Plugin session. Ver 0.10.0.51
Loading settings...
Preparing settings dialog
Locating avaiable serial ports:
Found: COM10 ,COM4 ,COM6 ,COM7 ,COM8 ,COM9 
Trying to get script list in: C:\Program Files\Far\Plugins\SEFP\\scripts
Found: db2012_50,db2012_51,db2020_49,db2020_51,db2020_52,k_00_CID29,k_00_CID29_v3,k_00_
ID29_v4,k_00_CID36,k_00_CID36_v3,k_00_CID36_v4,k600_CID36,k750_w800_CID36,k750_w
00_CID49,w300_w810_z550_cid49,w550_w600_CID49,z800_CID36
Trying to load script: db2020_51
Trying to open port: EPIUSB
Detected USB device: EPIUSB3
CID reading started. Connection Type is: DCU
Waiting for 1 byte(s)
0001 >> 5A 
0001 << 3F 
Waiting for 8 byte(s)
0008 >> 99 00 03 01 FF FF FF FF 
[hw]k800[/hw] series detected
0002 << 53 37 
EPIUSB: speed changed from 921600 to 921600
Executing script
Sending loader: C:\Program Files\Far\Plugins\SEFP\bin70129 0950 DB2020_PRODUCTIONIDLOADER_P3J.2020_1_BLUE
QH00 Header: $380
0004 << TiMED OUT
Wait for EsB
Waiting for 3 byte(s)
0003 >> TIMED OUT!
Read of 3 byte{s} timed out! Actualy read: 0
EsB read failed!

[francoisrobb]

Okay it eventually worked after trying about 6 times

[pepito]

This tutorial works great for me!!!

Thanks for your work.

[mak2k]

it sort of worked.. it created a directory called usb/other in the root of the device.. but it doesn't go into the phone's memory in other file.

i'm using a w580.. maybe it has a different path?