Disclaimer: Do this with your own risk (what the heck, your phone is dead anyway when reading this...)
What's needed: (search the forum for download locations of this SW)
Setool2 lite 1.08 - http://www.unlockeas...e...tit&lid=853
USB Smart SEMC Tool 8.4 (FREE) - http://www.se-tool.n...l_v8.4_free.rar
XS++ 2.2 - http://www.2shared.c.../XS_online.html
1. Download FW (Main +FS)
2. Download Customization File
File is .zip. Use the .zip file in Setool2 lite. No need to unzip.
3. Download GDFS
This would be in the .bin format. Don't use the other one.
4. Flash FS+MAIN (R4CK003 only) and Custom file using Setool2 lite 1.08 and DCU-60 / Service Cable. In this step you can also use XS++ 2.2. It was just a matter of preference.
5. Write GDFS using XS++ 2.2 using the file downloaded in step 3 using DCU-60.
Note: After this step, if you turn-on phone, it will get stuck at "Please Wait". You can try the "Please Wait" vkp patches but for my case, I cannot find one for R4CK003, and this only happens when you flash a foreign GDFS. If you flash back your backup GDFS, then you would not have this issue. You need to check the size of your backup GDFS. It should be between 70 - 90 KBytes. My old one has 1KB after backup so I know it has fu$ked up!
6. Do Selected Jobs using USB Smart SEMC Tool 8.4 (FREE)
Clear SP locks
Read All Codes
Clear User Code
Follow prompts. It will ask you twice to remove cable and battery. It's normal.
For more info: http://forums.se-nse...?showtopic=5381
Note: Check here the supported firmware for W810. The highest version of CXC supported is R4CK003. The newer ones won't work.
7. Remove battery, then insert it back . Now turn on.
8. Turn off then insert SIM and Memory card. Perform a master reset
9. Now please.... BACKUP your GDFS in case you want to upgrade it to a newer firmware.
10. Upgrade to a newer firmware.
Have fun. Let me know if this has helped you.
ALTERNATIVE to STEP 6:
If you cannot really buy a cruiser cable, then try the following firmware:
W810 SW-R4DB005 -> http://www.iprotebe....0-cid49-r4db005
... and use the patch from the other topic: http://forums.se-nse...showtopic=16398
Copy code below and paste in notepad and save as .vkp.
;W810 SW-R4DB005 ;Remove SIM-Lock ;(ñ) IronMaster ;(p) INFerno-- +44140000 d0932c: 70B5041CEFF2F0FE00230022011C1C20 F0B505213A22D1F7CFFC0020F0BDC046 ;locale=Russian_Russia.1251
So in my instructions, follow step 1-5 then for step 6 using R4DB005, refer to below:
*To clear SP locks
6.1 Open Setool2 lite 1.08. On the MISC files: section, browse to the directory where you have the .vkp patch above. Select the patch. Now click on WRITE SCRIPT and follow prompts on the log window. Click NO, to continue applying patch.
*Read All Codes
*Clear User Code
6.2. Using XS++ 2.2, connect DCU-60 and follow prompts. Click GDFS section. Click on Read All Codes.
Note: Steps 6.1 and 6.2 would try and mimic what SEMC 8.4 does so hopefully you won't get the "Please Wait..." screen. I cannot guarantee it will work but it is worth a try.
NOTE: I have not tried this approach but based from the user in the other topic, he says it works. If somebody tries this method, please let me know if it works. Cheers...
Edited by dcaffeine8d, 08 October 2007 - 04:13 AM.