[dragonduster]

Boysie, on 2009-10-18 00:31, said:

I take it the GDFS is a backup from YOUR phone and have you removed the battery for 10 seconds then reinserted it? Then try and connect again.

yes, the GDFS is the backup i did from MY phone before i did the first reinstall of the firmware, i waited more than 10 secs and didnt work, i removed battery and pressed power (just in case) and reinserted battery and still didnt work, its like if i didnt do anything, after i press "Connect" it says to connect my phone holding C and the 30 secs goes like if i didnt do anything, i reinstalled the USB drivers (thinking it could be a driver's problem for not detecting phone) and nothing, feels like my phone is dead

when i remove battery and reinsert it and try to power it on, i can see a red light up on and off once (where the infrared port is) with the cover of battery off then it doesnt do anything else until i remove the battery again.

[Boysie]

I'm afraid its dead. No free way to revive it. Only an SETool box or taking it to service center will fix it.

[dragonduster]

dammit, and i was hopping there were still a hope for that >.< last time i took it to see if they could repair it they said they would charge me $50 to fix it (reinstall firmware) thats why i searched liky mad to find firmware and found this site =D

i guess i will sell it for parts then and get me a new one, thanks for the help.

[anbusan]

I want asked one question....I'm not flashing my FW yet but when I check my CDA number it show like below

CDA 12345678/123 R11A
1204-1255 R3CA033
1E0W
APAC-ANZ

I already download this FW

W980_R3CA038_FS_APAC-ANZ_RED52
W980_R3CA038_MAIN_CHINA_MD_RED52

so my question is....which custom files should I download? What is my CDA number because it show 12345678/123 only....do I need to wait until I flash my FW to know my CDA number?

thanks for your help

This post has been edited by anbusan: 04 December 2009 - 04:48 AM

[Krazyd007]

No you can use any cda as long as its for our phone model

[Boysie]

krazyd007, on 04-12-2009 07:43, said:

No you can use any cda as long as its for our phone model

It must match the fs being used ie region.

[Krazyd007]

Yeah forgot to mention that. If you have a western europe fs you must have a cda (custom pack) with western europe.

[Boysie]

anbusan, on 04-12-2009 03:34, said:

I want asked one question....I'm not flashing my FW yet but when I check my CDA number it show like below

CDA 12345678/123 R11A
1204-1255 R3CA033
1E0W
APAC-ANZ

I already download this FW

W980_R3CA038_FS_APAC-ANZ_RED52
W980_R3CA038_MAIN_CHINA_MD_RED52

so my question is....which custom files should I download? What is my CDA number because it show 12345678/123 only....do I need to wait until I flash my FW to know my CDA number?

thanks for your help

Use this...
http://www.seusers.c...mp;linkid=14522

[anbusan]

Boysie, on 04-12-2009 10:47, said:

Use this...
http://www.seusers.c...mp;linkid=14522

thank you krazyd007 and Boysie for your help....

[Boysie]

Np

[z1c]

please help me..
after I flasing file system with XS++, the computer can't open the port of my phone..
my phone is k750...
I'm not yet install file main and costumizing file...
I want to flashing my k750 to W800...
and now my phone is absolutely dead...
what should i do.?
please help me..
emergency....

[KK§cchaos]

Have you taken out the battery?