13 replies to this topic

[eyeyousee]

Here you can easily identify which is which!

[PabloMDiez]

You aren't right.. Between 8 and 9 pin's there's a 130 OHM Resistor..

Look here: http://www.topsony.c...ead.php?t=21245

It's my thread and m1ch43lzm explains about resistors..

Regards!!


EDIT: Resistor indicates to phone wich acoustic to use.. YEP!! Change acoustic with a fissical switch heheh

Edited by PabloMDiez, 03 September 2007 - 03:32 PM.

[eyeyousee]

LOL! This is a normal HPM-70 Scheme! Not the modded one! LOL! LOL! LOL!

Did anyone hear me say modded HPM-70 in the title? LOL! This is a simple scheme!

Besides, only you understands your thread! LOL!

Edited by eyeyousee, 11 March 2008 - 08:18 PM.

[joka90]

is it possible to dissemble the black version of hpm-70? I have only managed to remove the first plastic part, so you can see the copper connectors.

[eyeyousee]

Yes of course, it has the same connections. But why do you want to remove it?

[joka90]

Because the cable to the headset bean damaged and I need to resolder it

[eyeyousee]

Ok!

[Goosh]

eyeyousee, on 2007-09-20 07:59, said:

Ok!

Hi there, is it possible you could help me 'fix' my headphones to my Sony adapter please?  I just want to connect the headphone wires to the correct wires on the adapter, it doesn't have to look professional, I just want it to be correct and safe.

The wires are unbelievably small!  On each headphone wire there are what looks like ground copper wires and colour coded wires, Orange for the right ear piece and Green for the left one.

On the Sony adapter it looks like there are 5 coloured wires, Orange, Green, Blue that attach to the 3.5mm socket and Gold and Red that attach to the 'Call' button on the adapter.

Thanks for any advice

Attached Files

•  headphoneadapter.jpg   195.72K   415 downloads

[fastreload]

hi there,
do anybody have got hpm-82 pinout?
i've got one and it's wires had been damaged, so it needs to be resoldered but w/o pinouts, you've got 229.442.532.802.560.000 combinations

thanks in advance

[Y-a-h-y-a]

lol! What's da advantage of this thing???

[eyeyousee]

Lot's of things mate! Once you've got your earphone wires broken, then you will understand!

[Bankruped]

eyeyousee, on 2008-03-14 01:04, said:

Lot's of things mate! Once you've got your earphone wires broken, then you will understand!

If i have an old (say p910) handsfree kit in my car and would like up upgrade it to fastport, changing cradle an resolder all cables according to the pin-out schemes, would that work or do i need to fiddle around with resistors to make it work ?

[eyeyousee]

Bankruped, on 2008-04-08 08:25, said:

If i have an old (say p910) handsfree kit in my car and would like up upgrade it to fastport, changing cradle an resolder all cables according to the pin-out schemes, would that work or do i need to fiddle around with resistors to make it work ?

Could you show us some pictures of your old kit!?

[Vick odera]

Hi, this is a good question coz i have the same problem but now mine is on the adapter. Am just too confused how to fix the 12 codes on which particular pin. Can someone help coz the above scheme is no the same as the HPM 82that i have?
THANKS

Halloz.....is it possible to get the same scheme above but the one for HPM 82. Igot one but its got spoilt and just disintergrated and too confused to fix them to the right pins.
thanks