[trident167]

Hi everyone! This is my first post but I have been browsing around the forum for last two days.
I have learned a lot already and have been able to get new firmware on the damn thing to replace the WsoD. Anyhow, my question is, how would I get some new drivers for the camera and audio onto the phone? I have seen some tutorials but they seem very confusing.
I have a W810i and on a recent post I saw my phone wasn't on the list to be able to use FAR/SEFS.
Any help would be appreciated.
Thanks.

[bimasakti85]

w810 already supported to access the file system through FAR, but not yet for the flash. To change camera and audio driver, copy the new driver with FAR to : "IFS/settings/camera" and "ifs/settings/accoustic".

[trident167]

I've tried numerous times but when I try and access the SEFS plugin, like the tutorial suggests, I get an error message and the program shuts down. Should I be doing something else to just access system files?

This post has been edited by trident167: 27 July 2007 - 04:33 PM

[bimasakti85]

Could you post us the screen shot and the log file ? That will be very useful.

[trident167]

16:25:28| Phone-XS GUI Build V2.10 Alpha Ready!
16:25:28| System Diagnostics check: OK!
16:25:31| Attempting to open the interface...
16:25:31| ++++++++++++++++++++++++++++++++++
16:25:31| Turn off phone
16:25:31| Hold C Button on phone and connect phone.
16:25:31| You have 30 seconds.
16:25:31| ++++++++++++++++++++++++++++++++++
16:25:38| PORT STATUS: ACTIVE
16:25:39| DBID: 8040 (db2010 Marita compact)
16:25:39| proto: 3.1
16:25:39| sending loaders\db2010_cid00_prodid_p3k.bin
16:25:39| QH00 Header
16:25:39| Wait for EsB
16:25:39| Wait for EhM
16:25:39| QA00 Prologue 6532 bytes
16:25:39| Wait for EaTEbS
16:25:45| Sorry, brown phones are NOT SUPPORTED
16:25:45| +++ Sendinging shutdown signal to phone...
16:25:47| Shutting down...
16:25:48| Phone-XS GUI Build V2.10 Alpha Ready!
16:25:48| System Diagnostics check: OK!
16:25:53| Attempting to open the interface...
16:25:53| ++++++++++++++++++++++++++++++++++
16:25:53| Turn off phone
16:25:53| Hold C Button on phone and connect phone.
16:25:53| You have 30 seconds.
16:25:53| ++++++++++++++++++++++++++++++++++
16:26:00| PORT STATUS: ACTIVE
16:26:00| DBID: 8040 (db2010 Marita compact)
16:26:00| proto: 3.1
16:26:00| sending loaders\db2010_cid00_prodid_p3k.bin
16:26:00| QH00 Header
16:26:00| Wait for EsB
16:26:00| Wait for EhM
16:26:00| QA00 Prologue 6532 bytes
16:26:00| Wait for EaTEbS
16:26:00| QD00 Payload 35540 bytes
16:26:00| Wait for EdQ
16:26:00| This is a PRODUCTION_ID loader
16:26:00| Activating GDFS...
16:26:01| phone name detected
16:26:01| ++++++++++++++++++++++++++++++++++
16:26:01| PHONE INFO
16:26:01| ++++++++++++++++++++++++++++++++++
16:26:01| DBID: db2010
16:26:01| OPT CID: 49
16:26:01| EROM CID: 49
16:26:01| EROM color: red
16:26:01| IMEI: 35906300xxxxxx
16:26:01| Phone: W810
16:26:01| Operator: ROGERS
16:26:01| CDA: CDA102494/108 R1A
16:26:01| Firmware: R4ED001
16:26:01| EROM: n/a
16:26:01| ++++++++++++++++++++++++++++++++++
16:26:01| ready for operation!

Attached File(s)

•  Error.jpg (49.65K)
  Number of downloads: 19

This post has been edited by trident167: 27 July 2007 - 08:41 PM

[bimasakti85]

Hmmm, I get it. Try reinstalling the plugin. It seems that the plugin you have is corrupted. Btw, why do you use PhoneXS v2.10 when there is XS++ v1.5 ?

[trident167]

I just picked up v2.10 because it was the first one I came across.
I'll try the plugin again.
Thanks.

[trident167]

I'm now using XS++ v1.5, installed a more recent SEFP ( 0.10.0.54) and I still get the same error message.
Can drivers be loaded just using XS++?

[trident167]

BTW, if anyone gets the same error messages, use this guide. It worked for me.

Quote

Choose SEFP plugin
If you get the error: "Unknown exception", Exception address: 0x7C812A5B...... The plugin will be Unloaded!
This is a bug. It's because you don't have any COM-ports, so create a fake COM-port connection. I did it with my BT Dongle. Alternatively, here is a mini howto create a fake COM-port by Cold & Flu Relief.

This post has been edited by trident167: 01 August 2007 - 03:34 PM