[Janto10]

hey.. first i want to know if i have the right files

Main: W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn ( 21,4 mb)

FS: W810_R4ED001_FS_EUROPE_3_RED49.fbn {9,75 mb

CDA for my region: CDA102494_75_EUROPE_3_GENERIC_NL.rar

now i flashed with XS++ 2.1 the fake flash file.. and then i take the battery out 5 sec << and then i reconnect usb cable and then i connect with far i get in and choose FS but then it hangs at { See attachment}

What to do now ? i flashed the real main back..but i want to customize my phone hehe

Attached File(s)

•  flash.png (9.48K)
  Number of downloads: 62

[khizerk]

This happens sometimes, make sure you have selected the correct bootscript and cable speed. Try 5-10 more times, it will work out.

[Sensei]

Yup take out your battery,wait and then connect again..
Happened to me once..when it hangs just let it be after a while it shall be okay...
cheers..

[Janto10]

... it worked and then i edited customize.xml flash themes from false to true and then exit cdfs loader andzo and flashed main back.. but now phone is going on and off??


what do do ?

16:30:21| ++++++++++++++++++++++++++++++++++
16:30:21| Turn off phone
16:30:21| Hold C Button on phone and connect phone.
16:30:21| You have 30 seconds.
16:30:21| ++++++++++++++++++++++++++++++++++
16:30:23| PORT STATUS: ACTIVE
16:30:23| Baseband ID: 8040
16:30:23| Hardware Platform: db2010 Marita compact
16:30:23| Protocol Version: 3.1
16:30:23| Sending loaders\db2010_cid00_prodid_p3k.bin...
16:30:23| This is a PRODUCTION_ID loader
16:30:23| Activating GDFS...
16:30:24| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:?½ ?)
16:30:24| ...using IMEI name
16:30:24| ++++++++++++++++++++++++++++++++++
16:30:24| PHONE INFO
16:30:24| ++++++++++++++++++++++++++++++++++
16:30:24| DBID: db2010
16:30:24| OTP CID: 49
16:30:24| EROM CID: 49
16:30:24| EROM color: Red
16:30:24| IMEI: 35906100xxxxxx
16:30:24| Phone: W810
16:30:24| Operator: ›
16:30:24| CDA: › ›
16:30:24| Firmware: ›
16:30:24| EROM: n/a
16:30:24| ++++++++++++++++++++++++++++++++++
16:30:24| Ready for operation!

[number1]

ur gdfs is corrupt i think theres something something dodgey with using far and a cid:49 and flashing the break in loaders u didn't try 2 turn ur phone on with the break-in loader flashed 2 ur phone did u ?

[Palex]

try reflash with XS as it seems to not recognise your FW maybe you screwed it, otherwise GDFS and i think service cable job

[SLuR]

It doesn't seem like GDFS is funked just by writing a 5 and 344 block file

Janto10=>Reflash with your original Main. and see what happens. Are you positive you selected the right boot-script when loading FAR into FS?

There is nothing "dodgey with using far and a cid:49 and flashing the break in loaders". It's a very simple and straight forward process that just plain works when done properly. Stick within proper memory addresses, and nothing ill shall happen.

[Janto10]

i flashed file system and main with orginal files... first FS then main... was succes and then removed batt 5 sec and put it back in and...white screen and then is off..what do to now ?

[Janto10]

19:29:37| ++++++++++++++++++++++++++++++++++
19:29:40| PORT STATUS: ACTIVE
19:29:40| Baseband ID: 8040
19:29:40| Hardware Platform: db2010 Marita compact
19:29:40| Protocol Version: 3.1
19:29:40| Sending loaders\db2010_cid00_prodid_p3k.bin...
19:29:40| This is a PRODUCTION_ID loader
19:29:40| Activating GDFS...
19:29:41| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:?½ ?)
19:29:41| ...using IMEI name
19:29:41| ++++++++++++++++++++++++++++++++++
19:29:41| PHONE INFO
19:29:41| ++++++++++++++++++++++++++++++++++
19:29:41| DBID: db2010
19:29:41| OTP CID: 49
19:29:41| EROM CID: 49
19:29:41| EROM color: Red
19:29:41| IMEI: 35906100xxxxxx
19:29:41| Phone: W810
19:29:41| Operator: ›
19:29:41| CDA: › ›
19:29:41| Firmware: ›
19:29:41| EROM: n/a
19:29:41| ++++++++++++++++++++++++++++++++++
19:29:41| Ready for operation!



how bad is it ?

[SLuR]

Never in this thread was it advised for you to flash FS. You can't follow instructions unfortunately.

You can either try your luck with a full reflash and re-customization with the freely available tools, or you can use DaVinci/Wotan and pay. You can also attempt to continue flashing FS and Main firmware with the original files, and perhaps you will get lucky.

Else you can purchase a Service cable or take it to a Service center for a full repair.

[Janto10]

hmmmz................................i guess you cant read then..

it worked and then i edited customize.xml flash themes from false to true and then exit cdfs loader andzo and flashed main back.. but now phone is going on and off??


what do do ?

16:30:21| ++++++++++++++++++++++++++++++++++
16:30:21| Turn off phone
16:30:21| Hold C Button on phone and connect phone.
16:30:21| You have 30 seconds.
16:30:21| ++++++++++++++++++++++++++++++++++
16:30:23| PORT STATUS: ACTIVE
16:30:23| Baseband ID: 8040
16:30:23| Hardware Platform: db2010 Marita compact
16:30:23| Protocol Version: 3.1
16:30:23| Sending loaders\db2010_cid00_prodid_p3k.bin...
16:30:23| This is a PRODUCTION_ID loader
16:30:23| Activating GDFS...
16:30:24| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:?½ ?)
16:30:24| ...using IMEI name
16:30:24| ++++++++++++++++++++++++++++++++++
16:30:24| PHONE INFO
16:30:24| ++++++++++++++++++++++++++++++++++
16:30:24| DBID: db2010
16:30:24| OTP CID: 49
16:30:24| EROM CID: 49
16:30:24| EROM color: Red
16:30:24| IMEI: 35906100xxxxxx
16:30:24| Phone: W810
16:30:24| Operator: ›
16:30:24| CDA: › ›
16:30:24| Firmware: ›
16:30:24| EROM: n/a
16:30:24| ++++++++++++++++++++++++++++++++++
16:30:24| Ready for operation!

and then i flashed main back did nothing with FS.. and turned the phone on after 5 sec batt out.. and white screen and then phone goes off

[Janto10]

and another thing... why i flashed the FS is because.. the problem started after i customized customize.xml

[SLuR]

I can't read? I am not the one who is having issues with accessing FS on my W810. Done. Somebody else can give you options. Good luck to you.