[connah]

@ mobilezzone
did you flash cid49 firmware by accident - did you fash the w800i firmware before trying to customise - also choose a finalisation with a custom pack as the europe3 there says custompack: no

@abc to xyz
why do you want to down grade from w800 to k750 you loose alsorts anyway its the same procedure of k750 to w800 but you use k750 firmware instead of w800 firmware

[vickmaker]

abc_to_xyz, on 2007-08-29 11:47, said:

how about W800 > K750... Plz PM me da procedure 2 flash my w800 2 k750 (CID36 - R1L002)..

regards.

im sure if you connerct to seus you get a k750 back at the end

[matt6n]

Hey I just tried to flash my k750 but have some problems at the end... Everything runs smoothly until the last part where it doesn't work. It says "Your firmware doesn't exists in our library. You'll need to reflash your mainfirmware. Done Flashing"
My phone won't turn on either by the way.


Any ideas? Cheers

[shiney.]

hi, may i know does these tutorials compatible with flashing my k800i to k810i?

[badboi4life]

hi im a noob at all this, can somebody please help me out

i have a branded k750i (R1CA021) CID49 and would like to flash to w800i. i have downloaded all the neccesary files needed and installed SEUS, but i havnt updated it yet. do i need to update it before flashing to w800i R1BC002?

i unlocked my fone at a local shop so if i update it using SEUS would it be locked again? secondly if i convert to w800i, would my fone stil be unlocked? after i flash my CID49 k750 to w800i, wud it still be CID49?

how long does it take to flash? if any problems occur can i do anything to fix my fone?

i had a w800i CID36 and was familiar with FAR in changin menu icons, media player skins and so on, so can i access my fone thru FAR after i flashed it to w800i? because it is a CID49 fone and as far as i remember CID49 fones cant be accessed with FAR, or can it?

if i apply a patch, can i also remove it? and how?

and if i apply a acoustics driver pack can i (if wanted) change back to the original acoustics and how?

another thing, my phone is a BROWN CID49 k750i, can i stil flash it to w800i? or do i have to do something else?

many many thanks. thanks loads

This post has been edited by badboi4life: 04 September 2007 - 09:03 PM

[players1988]

Hi !

I Also have an K750 CDI49 Phone Color Brown.


Can I also use this Tutorial ?


Thx

[players1988]

Can someone please answer me ?!

This post has been edited by players1988: 21 September 2007 - 01:25 PM

[likewhoami]

hi guys im a n00b
when i want to flash my k750i Do i have to do all
or are they different methord

PS I need somehelp when i start SEUS It asks for proxy connections

What do i write

[waleedhk]

hey guyz i converted my k750i into w800i. by using this tutorial. so when i open my cell it ask for start ph. so when i go there it says "Configuration error.Please contact your network operator or service centre. i am living in United Arab Emirates (in middle east). so please can anyone tell me how to make this mobile work. i want w800i not k750i. thank you.....please reply fast

[alesss]

hi!

i have flashed main and FS, but i have a problem with the customazation... the proces has stoped... i dont know what to do?

i realy need some help cause i dont want to mess something up... so pls... tnx

This post has been edited by alesss: 04 October 2007 - 04:18 PM

[Fireleaf]

Ok, I have few questions:

1. After I convert my k750i to w800i with this guide will I be able to use flash menus and stuff like that?
2. -//- will i be able to convert it back to k750i later?

Thanks in advance!

Cheers!
Fireleaf

[holl19]

291 flashblocks
binary acknowlege failed with: 15
Failed

please help! got tht ^ when flashing with XS++, i have a brown k750i.

i dnt understand the problem... please help

Cheers!

[waleedhk]

holl19, on 2007-10-12 02:08, said:

291 flashblocks
binary acknowlege failed with: 15
Failed

please help! got tht ^ when flashing with XS++, i have a brown k750i.

i dnt understand the problem... please help

Cheers!

thts not a problem even i have k750i red cid49 it giver the failed msg but still my ph. starts

[h_k_v2000]

I tried,

04:54:11| Turn off phone
04:54:11| Hold C Button on phone and connect phone.
04:54:11| You have 30 seconds.
04:54:11| ++++++++++++++++++++++++++++++++++
04:54:15| PORT STATUS: ACTIVE
04:54:15| Baseband ID: 8040
04:54:15| Hardware Platform: db2010 Marita compact
04:54:15| Protocol Version: 3.1
04:54:15| Sending loaders\db2010_cid00_prodid_p3k.bin...
04:54:15| This is a PRODUCTION_ID loader
04:54:15| Activating GDFS...
04:54:15| Warning: IMEI name does not match GDFS name (IMEI:W800 GDFS:K750)
04:54:15| ...using IMEI name
04:54:15| ++++++++++++++++++++++++++++++++++
04:54:15| PHONE INFO
04:54:15| ++++++++++++++++++++++++++++++++++
04:54:15| DBID: db2010
04:54:15| OTP CID: 49
04:54:15| EROM CID: 49
04:54:15| EROM color: Red
04:54:15| IMEI: 35967200xxxxxx
04:54:15| Phone: W800
04:54:15| Operator: EMEA_6
04:54:15| CDA: CDA102337/103 R3A
04:54:15| Firmware: R1DB001
04:54:15| EROM: n/a
04:54:15| ++++++++++++++++++++++++++++++++++
04:54:15| Ready for operation!
05:03:10| +++ Flashing breakin...
05:03:10| Sending loaders\db2010_cid49red_flash_r2a003.bin...
05:03:10| This is a FLASH loader
05:03:10| Sending flashfile loaders\breakin_49r_dcu.bin
05:03:10| 1 flashblocks
05:03:11| Done flashing
05:03:11| ++++++++++++++++++++++++++++++++++
05:03:11| Disconnect phone from USB-port and wait for
05:03:11| further instructions.
05:03:11| You have 8 seconds.
05:03:11| ++++++++++++++++++++++++++++++++++
05:03:19| Open the battery-cover and reinsert the battery.
05:03:19| Hold C Button on phone and connect phone again.
05:03:19| You have 30 seconds.
05:03:19| ++++++++++++++++++++++++++++++++++
05:03:32| Baseband ID: 8040
05:03:32| Hardware Platform: db2010 Marita compact
05:03:32| Protocol Version: 3.1
05:03:32| +++ Phone has restarted successfully...
05:03:33| *** Binary answer is ***
05:03:33| 3034303331392030393233204C
05:03:33| 4C45435843313332363733395F434F4D
05:03:33| 50414354434552544C4F414445522052
05:03:33| 3245
05:03:33| *** Clear text answer is ***
05:03:33| 040319 0923 LLECXC1326739_COMPACTCERTLOADER R2E
05:03:33| Sending command 3e with loaders\db2010_breakinR2E.bin
05:03:33| Wait for breakin hello

it gets stuck here, for hours. Now my phone says Configuration error...


Update : Got it .. I had the SIM still in the phone

This post has been edited by h_k_v2000: 20 October 2007 - 07:37 PM

[omegah0]

My K750 was unlocked. After complete this process the phone became locked again! What can I do to resolve this? I have no ideia about how to unlock the phone.

I am getting this message when turn on phone mode. And the process "Customize File System" neve ends. I wait about 8 hours.

"configuration error.
please contact your network operator or serice center."

[own_rulz]

1st i sent main firmware...after 291 block it sayzz failed then i sent flash file...after 291 blocks it stucks on finishing flash what do i do know please help me outtt

[chris_b0ss]

what will be added now???the first post was not edited from 2007-07-01 01:38 ...i think someone should continue this topic and make it the real ultimate tuturorial for flashing..!!!

[waleedhk]

omegah0, on 2007-10-20 10:00, said:

My K750 was unlocked. After complete this process the phone became locked again! What can I do to resolve this? I have no ideia about how to unlock the phone.

I am getting this message when turn on phone mode. And the process "Customize File System" neve ends. I wait about 8 hours.

"configuration error.
please contact your network operator or serice center."

open your phone with farmanager (check the farmanager tutorial). and upload the downloaded custom pack in the phone. if u need emergency help...send private message

[omegah0]

waleedhk, I sent to you a message.

waleedhk, on 2007-10-22 09:12, said:

open your phone with farmanager (check the farmanager tutorial). and upload the downloaded custom pack in the phone. if u need emergency help...send private message

[omegah0]

My K750 is alive! Now as a W800! After use FarManager with the "fake main" my phone comes to live again. Is it possible to upgrage the camera driver with Far and "fake main"?