Sign In
Register
Help
Bookmark
Del.icio.us
Digg
Email
Facebook
Google
Mixx
Reddit
StumbleUpon
Ok. You want to flash your phone from K750i to a W800i. You are new and almost dont know anything about this. Here you will get a detailed tutorial about how to do that. Ok, lets start.
Requirments:
A DCU-60 - A standard cable, comes with phone
A K750i Recommend updating using SEUS
XS++
A main file
A FS file
First a little about the main file: W800_R1BC002_MAIN_EU_EMEA_RED49.bin
W800_R1BC002_MAIN_EU_EMEA_RED49.bin
W800: The phone
R1BC002: Firmware Version
Main: Indicates that its the main firware
EU_EMEA: The operator
RED49: Color (Red) and lock number 49 CID49
And you need a FS file, i use this: W800_R1BC002_FS_EU3.fbn
Now, lets start flashing.
1. Open XS++
2. Press Start
3. You will get some instructions in the left panel
4. Hold "C" on your phone and connect.
if you get "PORT STATUS: ACTIVE" And nothing happens, then unplug phone, remove battery, and insert again. Then try again.
5. Check "Flash Main Firmware"
6. Press the "..." Button, means browse. Find the main file W800_R1BC002_MAIN_EU_EMEA_RED49.bin and click open
7. Now press "Flash"
8. When its done, it will stuck on 291/291, when its on 291/291 then wait 5 seconds, and unplug phone. In XS++ press Close.
9. Now XS++ is closed. Just enter it again. In your phone: remove battery, insert again. Successfully plug your phone to XS++.
10. Now, instead of Checking "Flash main Firmware". Check "Flash File System", Browse the file W800_R1BC002_FS_EU3.fbn and select it, press open. (Means that only Flash File system is checked)
11. Press "Flash"
12. when its done just remove phone from data-cable, remove battery, reinsert. Enter XS++, attach phone.
13. Now you will have to check "Customize File System", use this:
Select Phone model:
W800
Select CDA and Region:
EUROPE_3 (CDA102425/17)
14. Press "Flash"
When its done, Unplug phone, remove battery, insert again. turn on Phone. And congratulations !! Now your phone is a W800i !!!! Enjoy !
Credz to me. Just want to say thanks to bombastic..
2. Using FAR Manager with SEFP (Completed)
Sure you alleready found another tutorial that doesnt work, cause you will have to mix up files and whet ever. Here you will get a detailed tutorial:
You will need:
FAR Manager
SEFP
A DCU-60 Standard Datacable, comes with phone
A Phone -.-
Ok, we start with installing far, just install it normally.
Now you must have a shortcut in desktop for FAR, right click it, press propertiers. Press Find Target, a folder will appear.
OR
Go into: C:\Program files\Far\
Now we are in the folder FAR, You will See a folder called "Plugins", enter it.
Extract SEFP that you downloaded before in that folder.
Now we have a directory called C:\Program files\Far\SEFP with files.
Good. Go into the folder C:\Program files\Far\SEFP and run the application "sefp0.10.0.51patch.exe"
Warning! Your Anti virus may detect it as virus, its not!
press "Do it!", when its done just close..
Now, the plugin is installed.
Now you will have to flash a fake main, download from here:
k750w800_r2e_dcu.49r.rar (17.07K)
Number of downloads: 847
use XS++ to flash main, its just 5 blocks, when its done, you cant turn on phone, but you can use FAR,
Now go into FAR, press ALT+F1 you will se a list, press 0: SEFP
Device: DCU-60 - Speed: 921600
If you use An K750i or W800i select K750_W800_CID49 or K750_W800_CID49 as boot script
Press "Enter The Matrix". Follow Instructions from panel
If It says Boot: Waiting for phone or something like that, then it means you will have to remove battery, and insert again. If it says something with ChipID, then it means you will have to release C.
Now, enter the folder FS, the program will do something, Wait untill its done.
Congratulations! Now you are in your phone!
REMEMBER: if you flash FS (with XS++), you will lose everything changed with FAR, when you are done, and want to save your data, press the ".." keep clicking until it asks if you want to quit, press "Yes". your data is stored in phone
3. Apply Patches to your phone (Completed)
Using Gslide
first the tools:
Gslide
XS++
first learn how to flash normally.
In this, we only have to flash main again
1- Open Gslide
2- Next to the Flashfile textbox you see "..." press that [1] (See picture)
3- target your main W800_R1BC002_MAIN_EU_EMEA_RED49.bin [2]
4- Press Add and add all your patches [3]
5- Select the output file and press "Process" [4]
6- When its done, open XS++ and connect your phone
7- And flash your main with the output from Gslide
8- Cogratz done!
NOTE! If you cant open the files i uploaded, then use Winrar
This post has been edited by xabdullahx: 04 July 2008 - 09:46 PM
MultiQuote
