[flyingpig_69uk]

Hi everyone!

nabiladeeb kindly gave me a VKP patch to remove the "lens cover closed" error when you try to activate the camera with the lens cover closed. However, I need the patch for a k750i R1AA008 (red). I can't find the VKP for this specific firmware, and I'm not to keen on updating FW either.
Could someone help me out? Can someone convert the vkp to the correct addresses form k750i? Thanks guys! vkp below:

;W800 SW-R1BC002
;Èãíîðèðîâàòü çàêðûòóþ øòîðêó ïðè âêëþ÷åíèè êàìåðû
;To ignore the closed latch at inclusion of the camera
;Êîððåêòíî ðàáîòàåò ñ CID 49
;Correctly works with CID 49
;Ver 3.1
;© mobilefree.ru, SiNgle
;(p)Crystal
+44020000
C85CE2: 05D1 05E0 ;Ïðè âèäåî
F6ECD8: 05D1 05E0 ;Ïðè ôîòî
F6EF9E: 03D0 0020 ;Cid49Fix
F713B0: 0ED0 0EE0 ;Âûáðàíî âûñîêîå êà÷åñòâî âèäåî

[nabiladeeb]

hello there flyingpig_69uk,
well i suggest u upgrade your firmware to R1CA021, since it has most of the patches are available for it.
in case you decide to do so. here is the patch for K750i R1CA021...

;K750 SW-R1CA021
;Игнорировать закрытую шторку при включении камеры
;Ver 3.0
;©mobilefree.ru
44F8B47E: 0ED0 0EE0; Выбрано высокое качество видео
44C9B8C6: 04D1 04E0; При видео
44F88D42: 04D1 04E0; При фото

This post has been edited by nabiladeeb: 06 May 2007 - 05:05 PM

[flyingpig_69uk]

nabiladeeb, on 2007-05-04 23:41, said:

hello there flyingpig_69uk,
well i suggest u upgrade your firmware to R1CA021, since it has most of the patches are available for it.
in case you decide to do so. here is the patch for K750i R1CA021...

;K750 SW-R1CA021
;Игнорировать закрытую шторку при включении камеры
;Ver 3.0
;©mobilefree.ru
44F8B47E: 0ED0 0EE0; Выбрано высокое качество видео
44C9B8C6: 04D1 04E0; При видео
44F88D42: 04D1 04E0; При фото

Thanks that's great! I decided to update firmware to R1CA021 but before I go ahead with flashing I just wanted to check with you if the files I've got are right. I'll be using Gflash for the process.
I'm in Italy, but I'm English so I need English and Italian language, CID36 red so...
FS file - K750_R1CA021_FS_EUROPE_5_RED36.fbn.rar
Main - K750_R1CA021_MAIN_EU_1_CL_RED36.rar (only one I could find, is it correct?)
Finalising - K750i_CDA102337_13_EUROPE_5.zip (will this work with the above?)

After I've flashed I'll let rip with the vkp's!

[nabiladeeb]

the files will work fine.just make sure the custpack has english and italian (im not sure if Europe_5 has them)
the rest seem to be cool........All the best........

[flyingpig_69uk]

nabiladeeb, on 2007-05-07 19:39, said:

the files will work fine.just make sure the custpack has english and italian (im not sure if Europe_5 has them)
the rest seem to be cool........All the best........

Oh yeah! Got me an updated phone
First vkp I installed was the lens cover patch, worked a treat. Nice one, thanks!
Europe 5 was just right. I did a whole lot of research so I wouldn't mess up the flashing process but still don't understand, it seems you can use any main flash file for r1ca021. Well mine worked and that's all that matters. Off to get me all the vkp's I lost for my old fw.

Thanks for your help again.

Maybe I'll need help some time soon for my internal fm radio antenna project!

[andy572]

hi there im new to all this forum stuff and that
but i have the same problem as flyingpig_69uk with the lens cover as i broke the little plastic catch or sumin when changing case.
may i ask how you got around this and where i get the patch from ?
am so rubbish at this stuff, even having trouble updating =[
please help
many thanks
andy

This post has been edited by andy572: 26 May 2007 - 10:09 PM

[seggsygal2]

can someone pls convert this to W800 R1BC002 APAC pls?
i've been wanting this patch since i knew it exists...><"

[airaiduk]

hello i broke my switch and i soldered the 2 points closest to the left side of the phone with the phone facing down... works just like the patch does i would imagine...

[flyingpig_69uk]

airaiduk, on 2007-05-28 22:00, said:

hello i broke my switch and i soldered the 2 points closest to the left side of the phone with the phone facing down... works just like the patch does i would imagine...

Hey guys. I found out that the lens cover message patch only removes the patch. When applied to a camera with a broken camera lens cover switch, activating the camera shows no message and no image preview (you can still take a photo though).

The only way to fix a broken lens cover switch is either to replace it or to solder it.

However...on a k750i maybe there is a way to attach a thin metal strip to the grey plastic part of the sliding assembly, lined up with the two solder points of where the switch is/was so that when you open the lens cover the metal strip closes the circuit and activates the camer like normal!

[TempleGuard]

Is there any lens cover patch for a w800(dosent matter the version) (I dont want to go back to K750 software)?

[nabiladeeb]

hey, its right there in the first post.

[TempleGuard]

I forgot to tell that it must be for CID36. But i am going to try this CID49 patch to my CID36, I hope it works.

[RS2000]

How to apply this camera patch?

[amnher]

Use SEFP+FAR