hello,
i have an problem...
SRY for my english at first...
i have installed the USB Driver from the sony-ericsson page
than i have installed this phonelockcode programm
i turn the phone off and press the c buttonn than i have put the usb.cable into the phone but nothin happens
in the black box always stands the same...
what i have to do ???
and what i have to do with the old or new driver files i extract it and there are at the end 2 files who i have to copie it ?
Full Version: K750/W800 Read Phone Lock Code
the phone does not even startup like normal?
---
A) remove battery (+SIM). wait 10 seconds
B) insert battery
C) hold "C" + plug USBcable
---
A) remove battery (+SIM). wait 10 seconds
B) insert battery
C) hold "C" + plug USBcable
my phone is sim locked and in this phone is my o2-simcard
nothing happens in the software all is black and the white text is always there
nothing happens in the software all is black and the white text is always there
well, what happens in the phone then? does it start up and ask for code?
Can anyone tell me my code? Is it 0000?!
pick any 4 zeros from the 8 zeros displayed.
Can anyone tell me my Simunlock Code who i have to put in the NCK Box ?
Here is the link of my Phonedetails...
Here is the link of my Phonedetails...
Does this work with K750i? I've tried all your suggestions & followed all instructions, but the proggie just looks at me & does nothing.
Help
Help
hellloooooooooooooooooooooooooooooooooooo?????????
@colio:
go to the sonyericsson homepage and download SEUS. if you get that to run, this prog will work, too.
@jokeer:
hello! sometimes answers take longer than 22hours. this program will not tell you the NCK code. read post#1 there is explained what code this program can display.
go to the sonyericsson homepage and download SEUS. if you get that to run, this prog will work, too.
@jokeer:
hello! sometimes answers take longer than 22hours. this program will not tell you the NCK code. read post#1 there is explained what code this program can display.
Hendrix: the FAQ about SEUS says you have to have the DSS-25 desktop stand. I'm using the DCU-60 USB cable. Do you know if I can use this or do I have to purchase the desktop stand??
QUOTE (colio @ 2007-02-01 13:39) 
Hendrix: the FAQ about SEUS says you have to have the DSS-25 desktop stand. I'm using the DCU-60 USB cable. Do you know if I can use this or do I have to purchase the desktop stand??
Its ok, I spoke to Sony Ericsson here - they helped me out. I got SEUS working, upgraded my firmware & then got this working. Thanks SO MUCH Hendrix. You rock!
ooohhhh 
! ! !
Can anyone tell me may NCK-Code with my IMEI-Number ?
! ! !Can anyone tell me may NCK-Code with my IMEI-Number ?
thanx it works gr8
Does it work with red cid49 ?? It just does nothing when following all instructions have tried normal and service cable
its ok - downloaded seus and removed sim 
then it worked fine - thanks
then it worked fine - thanks
thanks man
Im following the directions carefully, im not sure what im doing wrong, im trying to get the code for my K608i and all i get is this. Help pls.... thanks.
see attached file.
see attached file.
Oh man, this app/thread is the business.
I've been reading the forums for a couple of days and I have learned about some of the things that can be done with the k750i such as firmware upgrades, menu tweaks and camera/acoustics driver optimisations. All of which sound cool but with one problem... I don't know the phone unlock code and neither does the person who gave me the phone. Which makes a master reset impossible.
Now all I need is the USB cable and I can jump into this community with both feet, all thanks to you hendrix. You rock dude. Great work.
I've been reading the forums for a couple of days and I have learned about some of the things that can be done with the k750i such as firmware upgrades, menu tweaks and camera/acoustics driver optimisations. All of which sound cool but with one problem... I don't know the phone unlock code and neither does the person who gave me the phone. Which makes a master reset impossible.
Now all I need is the USB cable and I can jump into this community with both feet, all thanks to you hendrix. You rock dude. Great work.
nice hendrix
urghh!!!
it isnt working for me!!
it just says
turn phone off. hold c button on phone and connect phone. you have 30 seconds
i do all of this and it just shuts it self off
it isnt working for me!!
it just says
turn phone off. hold c button on phone and connect phone. you have 30 seconds
i do all of this and it just shuts it self off
QUOTE (ishaan @ 2007-04-05 10:15)
urghh!!!
it isnt working for me!!
it just says
turn phone off. hold c button on phone and connect phone. you have 30 seconds
i do all of this and it just shuts it self off
it isnt working for me!!
it just says
turn phone off. hold c button on phone and connect phone. you have 30 seconds
i do all of this and it just shuts it self off
Download and Install SEUS, or if you can find it alone the USB flash drive driver. I think this is needed before the phone unlock code finder will work. I had the same problem as you're having and followed what the guy earlier in this thread said to do and install SEUS first.
Thanks again hendrix worked a treat, although it seems if you update to latest version with seus the phone lock code is reset anyway.
Do i need to use a usb DCU-60 cable or it works with a OEM cable that they supply to you? because i got a cingular phone and they supply with a usb cable.
Please help me!!!
Hi everyone. I'm trying to find out the phone lock code on my w800i which is on orange UK. I use an imac, so I plugged my cable into the usb port and downloaded the program Hendrix made. When I run the lockcode program press and hold c, and plug the cable into the phone I get the following screen:
Last login: Sun Apr 29 18:19:42 on ttyp1
/Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Welcome to Darwin!
computer:~ mildred_iii$ /Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Error scanning directory
Turn off phone. Hold C Button on phone and connect phone. You have 30 seconds.
***** Lockcode
***** Wait for 0x5a
***** ?
DBID : 8040 (db2010 Marita compact)
proto : 3.1
pad : ffffffff
***** ?
***** PRODUCTION_ID_LOADER
Cannot open
Apparently there is a file missing
logout
[Process completed]
Is there anyone that can help me sort this one out? I would be most grateful!!!
Regards,
Pete
Hi everyone. I'm trying to find out the phone lock code on my w800i which is on orange UK. I use an imac, so I plugged my cable into the usb port and downloaded the program Hendrix made. When I run the lockcode program press and hold c, and plug the cable into the phone I get the following screen:
Last login: Sun Apr 29 18:19:42 on ttyp1
/Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Welcome to Darwin!
computer:~ mildred_iii$ /Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Error scanning directory
Turn off phone. Hold C Button on phone and connect phone. You have 30 seconds.
***** Lockcode
***** Wait for 0x5a
***** ?
DBID : 8040 (db2010 Marita compact)
proto : 3.1
pad : ffffffff
***** ?
***** PRODUCTION_ID_LOADER
Cannot open
Apparently there is a file missing
logout
[Process completed]
Is there anyone that can help me sort this one out? I would be most grateful!!!
Regards,
Pete
sorry that i am about a year or so late but i have followed the instructions and my window for phonelock program just says ' turn off phone. hold c button and connect phone. nothing what so ever happens. please help.
If my phone reads:
what is my unlock code??pls help i'm in kinda hurry
CODE
Turn off phone. Hold C Button on phone and connect phone. You have 30 seconds.
***** Lockcode
***** Wait for 0x5a
***** ?
DBID : 8040 (db2010 Marita compact)
proto : 3.1
pad : ffffffff
***** ?
***** PRODUCTION_ID_LOADER
sending loaders/db2010_cid00_prodid_p3k.bin
QH00 Header
Wait for EsB
Wait for EhM
QA00 Prologue 6532 bytes
Wait for EaTEbS
QD00 Payload 35540 bytes
Wait for EdQ
060718 1026 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3K
This is a PRODUCTION_ID loader
***** Read flash vendor & id (cmd 0D)
Binary answer is: 0a (890d)
***** Read OTP (cmd 24)
Closed: 1
CID : 49
PAF : 1
IMEI : 35930200xxxxxx (unknown model)
***** Read EROM (cmd 57)
Color : 04
long2 : ff
CID : 49
***** Open GDFS (cmd 22)
Binary answer is: 1d (00)
***** Read GDFS variable (cmd 21) 00 0e 00
Binary answer is: 1d (00cab8eabc1e28decbc85faf3134f3316bac08fe2800000000551e0001
001e000055551e0001001e000055551e0001001e000055551e0001001e000055551e0001001e0000
55551e0001001e00005500ff0000000000000000082962016100303742040000000000000000)
... and the phone lock code is: 00000000 (only 4 digits)
***** Read GDFS variable (cmd 21) 00 06 00
Binary answer is: 1d (00434a8b9cff2d7d9223957a4524f29b117ea5e3b90000000000010000
00000001ff0000000000000000000000000000000000000022f60100000000000000000000000000
0000ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffff0000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000)
***** Shutdown (cmd 14)
***** Lockcode
***** Wait for 0x5a
***** ?
DBID : 8040 (db2010 Marita compact)
proto : 3.1
pad : ffffffff
***** ?
***** PRODUCTION_ID_LOADER
sending loaders/db2010_cid00_prodid_p3k.bin
QH00 Header
Wait for EsB
Wait for EhM
QA00 Prologue 6532 bytes
Wait for EaTEbS
QD00 Payload 35540 bytes
Wait for EdQ
060718 1026 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3K
This is a PRODUCTION_ID loader
***** Read flash vendor & id (cmd 0D)
Binary answer is: 0a (890d)
***** Read OTP (cmd 24)
Closed: 1
CID : 49
PAF : 1
IMEI : 35930200xxxxxx (unknown model)
***** Read EROM (cmd 57)
Color : 04
long2 : ff
CID : 49
***** Open GDFS (cmd 22)
Binary answer is: 1d (00)
***** Read GDFS variable (cmd 21) 00 0e 00
Binary answer is: 1d (00cab8eabc1e28decbc85faf3134f3316bac08fe2800000000551e0001
001e000055551e0001001e000055551e0001001e000055551e0001001e000055551e0001001e0000
55551e0001001e00005500ff0000000000000000082962016100303742040000000000000000)
... and the phone lock code is: 00000000 (only 4 digits)
***** Read GDFS variable (cmd 21) 00 06 00
Binary answer is: 1d (00434a8b9cff2d7d9223957a4524f29b117ea5e3b90000000000010000
00000001ff0000000000000000000000000000000000000022f60100000000000000000000000000
0000ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffff0000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000)
***** Shutdown (cmd 14)
what is my unlock code??pls help i'm in kinda hurry
@increaul >>> hi hi hi... lost your code???
and hey, what is this OTP???
and hey, what is this OTP???
It reads the phone lock code as in the security code. Mine said 0000 which was default. I did change my phone lock code but it reset after i paid to have it unlocked.I think the phone shop must have reflashed my phone.
Thanks.
QUOTE (hendrix @ 2006-09-11 12:20)
Use this little program to read the phone lock code from your K750/W800.
Might work with other phones as well.
I have tested the program with my service cable.
Since I cannot find my USB cable I cannot test it.
Executables are included for Mac and Win.
This is the readme:
1) turn off phone
2) execute LockCode_USB.exe (double-click)
3) connect phone to PC via USB cable
4) read the output
Edit: new version that waits for a anykey before it quits
Edit: newer version that will display your lock code in clear text
Might work with other phones as well.
I have tested the program with my service cable.
Since I cannot find my USB cable I cannot test it.
Executables are included for Mac and Win.
This is the readme:
1) turn off phone
2) execute LockCode_USB.exe (double-click)
3) connect phone to PC via USB cable
4) read the output
Edit: new version that waits for a anykey before it quits
Edit: newer version that will display your lock code in clear text
this is my result:
Turn off phone. Hold C Button on phone and connect phone. You have 30 seconds.
***** Lockcode
***** Wait for 0x5a
***** ?
DBID : 9900 (db2020)
proto : 3.1
pad : ffffffff
***** ?
***** ICO0 Read OTP
Raw answer is: 631300013100013335333939363031303933373233
Closed: 1
CID : 49
PAF : 1
IMEI : 35399601xxxxxx (unknown model)
***** IC30 Read EROM color
Raw answer is: 630404000000
Color : 0
***** IC40 Read EROM CID
Raw answer is: 630431000000
CID : 49
***** Read GDFS variable (cmd ICG1) 00 0e 00
Raw answer is: 000e006a000000
Raw answer is: 0966a65c3e8bb28812a5e54753de31f86a1661f400000000511e0001001e00005
5541e0001001e000055541e0001001e000055551e0001001e000055
***** Read GDFS variable (cmd ICG1) 00 06 00
Raw answer is: 000600aa010000
Raw answer is: 329dc26e09f3afa5ff1804cd159d0bc44439193d000000000001000000000001f
f0000000000000000000000000000000000000032f4010000000000
***** PRODUCTION_ID_LOADER
sending loaders/db2020_cid01_prodid_r3a.bin
QH00 Header
Wait for EsB
Wait for EhM
QA00 Prologue 7484 bytes
Wait for EaTEbS
QD00 Payload 53411 bytes
Wait for EdQ
060201 1430 NPACXC1250330_DB2020_PRODUCTIONIDLOADER_R3A
This is a PRODUCTION_ID loader
***** Read flash vendor & id (cmd 0D)
Binary answer is: 0a (2019)
***** Open GDFS (cmd 22)
Binary answer is: ff (22)
Cannot open GDFS
***** Shutdown (cmd 14)
Binary acknowledge failed with: 89
Failed
Failed
what do i have to do??????????
please can you help me
bravo! brilliant piece of work!! 
i dont get it ...
wats the LockCode_usb.exe ? and wer is it?
cuz i cant find it
plz help
wats the LockCode_usb.exe ? and wer is it?
cuz i cant find it
plz help
hi ,
I followed this tutorial word for word , it's generated a code, but when I enter it , it says "Configuration error please contact your network opertor"
Can anyone Help pleaseee!!!!!!
I followed this tutorial word for word , it's generated a code, but when I enter it , it says "Configuration error please contact your network opertor"
Can anyone Help pleaseee!!!!!!
QUOTE (fishcakenose @ 2007-06-04 19:18)
hi ,
I followed this tutorial word for word , it's generated a code, but when I enter it , it says "Configuration error please contact your network opertor"
Can anyone Help pleaseee!!!!!!
I followed this tutorial word for word , it's generated a code, but when I enter it , it says "Configuration error please contact your network opertor"
Can anyone Help pleaseee!!!!!!
you need to upload the custom pack to your phone
QUOTE (gaming_guy @ 2007-06-04 20:08)
you need to upload the custom pack to your phone
Cheers mate, Next question where can I get that from?
i have a k800i i dnt no the lock code how do ii get it off help me please
Hi there, I used this to try and get the phone unlock code from my K800i and I got this response (as per attachment).....
It doesnt work.. nothing happens. I get an adding wizard in stead of something happening. I've got a CID36 k750i flashed to a w800i. It should work right?
How can I see if my mob is cid36 or cid49?
I have W800 and I can't find Seus(not shure what is it) but I download update software for my mob from sony-ericsson site.
What file do I have to run, becouse I have two folders: __MACOSX and _phonelockcode, in _phonelockcode I see LockCode.exe file, I tried with this one...doesn't move from ...you have 30 sec. ...
help please!
I have W800 and I can't find Seus(not shure what is it) but I download update software for my mob from sony-ericsson site.
What file do I have to run, becouse I have two folders: __MACOSX and _phonelockcode, in _phonelockcode I see LockCode.exe file, I tried with this one...doesn't move from ...you have 30 sec. ...
help please!
does battery need to be full charged, because when instaling update from sony-ericsson site you have to have battery fully charged?
WORKS FINE!!!
QUOTE (yamadado @ 2007-06-28 12:28)
How can I see if my mob is cid36 or cid49?
I have W800 and I can't find Seus(not shure what is it) but I download update software for my mob from sony-ericsson site.
What file do I have to run, becouse I have two folders: __MACOSX and _phonelockcode, in _phonelockcode I see LockCode.exe file, I tried with this one...doesn't move from ...you have 30 sec. ...
help please!
I have W800 and I can't find Seus(not shure what is it) but I download update software for my mob from sony-ericsson site.
What file do I have to run, becouse I have two folders: __MACOSX and _phonelockcode, in _phonelockcode I see LockCode.exe file, I tried with this one...doesn't move from ...you have 30 sec. ...
help please!
Sony
Ericsson
Update
Service
SEUS
First try with XS++ and you will know (have you press and hold C while plugging usb cable DCU-60?).
thanks a lot hendrix!
Hello. I'm literally a N00b
But still i could do it, worked fine, even after being told by SE that it would need to be sent to a service centre and cost £30.
I had a few problems to start with, so here are a few tips.
1 - Run the program from Command prompt (described earlier)
2 - Make sure you install the USB flash drivers when prompted the first time you try this (can be found on this thread: http://forums.se-nse.net/index.php?showtop...=flash+drivers)
3 - Make sure you remove the battery befiore trying properly.
4 - Unlock code came out in plain test
Great Work!!!
Cheers
But still i could do it, worked fine, even after being told by SE that it would need to be sent to a service centre and cost £30.
I had a few problems to start with, so here are a few tips.
1 - Run the program from Command prompt (described earlier)
2 - Make sure you install the USB flash drivers when prompted the first time you try this (can be found on this thread: http://forums.se-nse.net/index.php?showtop...=flash+drivers)
3 - Make sure you remove the battery befiore trying properly.
4 - Unlock code came out in plain test
Great Work!!!
Cheers
It work and gave the unlock code 0000
what I need to know is: how do I use this unclock code to unlock my w800i SIM lock ?
Thanks
Sharon
what I need to know is: how do I use this unclock code to unlock my w800i SIM lock ?
Thanks
Sharon
QUOTE (fleximaster_uk_2002 @ 2007-04-29 19:28)
Last login: Sun Apr 29 18:19:42 on ttyp1
/Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Welcome to Darwin!
computer:~ mildred_iii$ /Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Error scanning directory
/Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Welcome to Darwin!
computer:~ mildred_iii$ /Users/mildred_iii/Desktop/_phonelockcode/lockcode; exit
Error scanning directory
Hi,
somehow I got my Terminal.app to *change directory to where the program is*. So, when I double click the program then Terminal will start on my Desktop; whereas your Terminal.app starts in your homedirectory.
You need to copy the program to your homedirectory (*directly*: /Users/mildred_iii/lockcode), including the subdirectory with the loaders.
HDX
QUOTE (increatul @ 2007-05-14 20:57)
If my phone reads:
what is my unlock code??pls help i'm in kinda hurry
CODE
Turn off phone. Hold C Button on phone and connect phone. You have 30 seconds.
...
... and the phone lock code is: 00000000 (only 4 digits)
...
***** Shutdown (cmd 14)
...
... and the phone lock code is: 00000000 (only 4 digits)
...
***** Shutdown (cmd 14)
what is my unlock code??pls help i'm in kinda hurry
"0000"
QUOTE (Thierry @ 2007-05-29 00:21)
DBID : 9900 (db2020)
db2020 not supported because the lock code is encrypted.
k800 is a db2020 phone.
Hi, I have k750i and I tried the code, which was all zeros, but it doesn't work. It says that it's too short (4 digits). I also tried to update with seus and said the phone can not be recognized. And when I enter the unlock menu it tells me that it's got an MNC code. I don't know if these matter, I just want to unlock the phone, if you have any idea please help.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.