Follow this guide for patching CID53 phones.

Flash with R8BA first then when you can access bflash with qa2020 script, flash R6BC/rest and qapatch again

Note: If ByPass Package is not available for the firmware of your choice, Read Carefully.

We have bypass pacakges only for few firmwares. If you don’t find one for your phone firmware, then there is a other way to get around and apply patches. The method is the same, but there are few changes. Here is the Small Tutorial… Its almost the same as above. But you need to re-flash firmwares twice.

1. First Flash your phone with the firmwares for which the bypass package is available. You can download firmwares from topsony or seusers. Flash both the Main and FS. Use db2020 Script, Oflash as told above.
2. Upload the bypass files, executor.b executor.jar and customize_upgrade.xml to FS as told above using JDflasher. Start your phone.
3. Run Executor in Games. Phone will shut down.
4. Connect phone with qa2020.xml and Flash the Main firmware via COPY (F5) of your choice which you wanted. Don’t flash Rest File. Its not needed.
5. Flash Quick Access VKP via COPY(F5).
6. Disconnect. Connect again with db2020 Script OFLASH. Flash the FS of your choice.
7. Connect again with db2020 Script and Enter OFS, upload CDA files. Close. re-insert battery and start phone.
8. Now you can follow Part 4, to apply more patches.

one NOTE guys
see if u are going to do any cid for a firmware for which u don have the executor,,, ITS NOT NECESSARY TO FLASH F.S AT ALL, jus flash the main for which the executor is available (example R8BA024), the run the executor after copying, then instead of the REST file, flash the FW that u want for ur phone (example R6BC002)and then ITS QAP (QAP generated by using R6BC002 in this case)