hey all ere is a nice and simpal guide on how to make your k800 look like a k810 all thanks go to philzfog as he let me post it ere



Remove the two screws at the bottom of the phone with the torx 6 screwdriver. Remove the other two screws with the Phillips screwdriver
Lift the antenna cover away from the phone. It unclips at the top of the phone and needs a little force to remove
Remove the two torx 6 screws at the top of the phone which are revealed after removing the antenna cover
Pull the front cover away at each side so that it releases
The phone will now be in two parts, as below
Wiggle and pull the keypad assembly up, away from the phone and it will pop off

then u need to remove the lcd 2.18
then remove the old k800 keypad 2.19
then remove the flash felx 2.1.10 picture 1,2
then unclip the k800 black frame from the main borad u can change it with out takeing the camera off the main board (as the flex breakes some times)
replace it with the k810i black frame then put the flash flex back on to the board press the black clip back in to place
clip the k810i key pad back on to the board 2.1.9
then replace the lcd u can use a k800 lcd but it has to have the outercaseing that is from a k810i as it is smaller 2.1.8
then when the lcd is back in place u can put the keypad back in place 2.1.8 up to 2.1.7 then place the k810i top row off buttons back on these just clip on
then u may have to use a smaller Antenna/Speaker Box Assembly as the old k800 have a big Antenna/Speaker Box Assembly than the k810i but some late k800 are the same size 2.1.5
then place the front cover down makeing sure u have put the the speaker on to ur new cover and all the buttons 4.1.7
then screw the 2 t6 screw back in 4.1.7 pic 4
then the rest that u need to follow is in the pictures 4.1.7 to
4.1.10
hope this helps tryed my best lol any questions just pm me



DISCLAIMER !!!!plz note this is a guide to help u change ur k800i to a k810i I am not or se-nse responsible for any thing goes wrong to try this guide at ur own risk

since philzfog is not on ere much no more i asked if i could post his tut ere as i have not seen anything about this on ere only fw modding thanks philzfog

seems to be tough work... I'd rather not try it...

it not hard at all buddie it looks hard but it easy if you need any help ill help you out

It seems to be great I`d really like to mod my k800i, but I need more information and more photo how to do that! What additional parts do I need? Please make more photo, Help me!

Wow. Can someone post pictures with the K810 case on there? Thanks in advance.