SE-NSE Forums > Xs ++ Doesn't Work:s

SE-NSE Forums > SE Firmware > Newbie Forum

.eX

2009-01-09 16:59

XS ++ doesn't work it stat ups etc. but when I turn off my mobile and remove my battery, hold down c etc. It won't connect i get this message
17:40:51| XS++ v3.1 (Darwin) Ready !
17:40:51| Executed on Microsoft Windows XP
17:44:17|
17:44:17| Attempting to open the interface...
17:44:17|
17:44:17| TURN OFF PHONE!
17:44:17| Hold 'C' button on phone and connect phone NOW.
17:44:17| You have 30 seconds...
17:44:17|
17:44:47| Error: Cannot open phone communication port
17:44:49| Disconnected... Unplug the phone
This is already the eight time I've tryed it but it just won't work

so my question to you is what am i doing wrong?
I got a Sony Ericson K800I and thanks for reading it and I know i'm a total noob

in modding but I wanted to try it some time=]

.eX

cchaos

2009-01-09 18:21

Ypou need to install the usb flash driver (lnk in my signature)

.eX

2009-01-09 19:02

thank you so muche cchaos I realy apriciate that=] and i hope you are right I'm going to take a look now and I will post if it worked but thanks again=]

.eX

2009-01-09 19:33

Stil doesn't work:S

cchaos

2009-01-11 06:42

QUOTE (.eX @ 2009-01-09 19:25)

Stil doesn't work:S

It should do. Extract the files by running the exe (its a self extractor), then try again:
http://www.wotanserver.com/USBFlashDriver.exe

QUOTE (cchaos @ 2008-08-26 16:38)

Right click my computer, select properties. Now go to the hardware tab and open device manager (vista will ask to ok this if you have user management enabled)

Take sim out, take memory card out, and reinsert the battery, do not turn on, do not open anything else on the pc (including XS++)

Connect your phone to the USB cable holding 'c' - make sure you have a fully charged battery

See if windows detects a sony ericsson USB flash device (watch the USB ports via connection if possible ie view devices by connection)

If it dont, and shows new hardware found or a new device with a question mark beside it, right click on the new hardware, and select update driver, and use the driver thats in my signature. Say continue installion at the poopup window, then youre ready

If that dont work, what version of windows and service pack are you using?

devilwasabi

2009-01-11 07:39

http://forums.se-nse.net/index.php?showtopic=31148&hl=

.eX

2009-01-11 12:35

I'm using windows xp profesional with service pack 2
but the weird thing is it's installed because the files stand on my C drive [I'm meaning the self extractor] but XS++ keeps saying that he can't open the phone communication port =S

cchaos

2009-01-12 13:22

QUOTE (.eX @ 2009-01-11 12:27)

Reread my reply again, its not installed into c:\windows\system32 etc (ie your pc doesnt know what your phone in flash mode is)

.eX

2009-01-12 18:00

At the start I got that message of new hardware found but after using the usb flash drive it didn't appear any more so I think he knows what my phone in Flash drive is but it can't connect to it

some how

cchaos

2009-01-13 10:27

Try again using my method: that will show tell you if its installed or not and use the same usb port as you did when you first connected it to your pc in flash mode

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.