This tutorial teaches how to flash your device SE W580 in a very simple and speedy way that even beginners not feel difficulties, and as stated in the title of the topic takes an average of 7 minutes. This is possible because posting to the complete package that also set with several improvements.

Before doing this tutorial back up everything, including the agenda. Everything in the unit's internal memory will be erased. I recommend the use of MyPhoneExplorer to back up.

This process will bring the following benefits:
- Delete all customizations including the operator's icons. In short, is how the unit had left the factory.
- Unlocking the menus flash. In the device comes only 3, but the package I to posting another 3 with their respective themes. The subjects I did not put the package because if someone does not like the topic simply by deleting the windows.
- Improve the camera driver. The driver of the package to shoot 30fps.
- Improve and increase the audio driver.
- Delete the damn name of the operator's screen
- Remove the noise of the camera. Removed only the sound number 4 in camera, why change the sound to the number 4.


To get started you will need the following files:

Setool2lite. If you have not you can download here:
http://www.4shared.com/file/33775153/93da4...e_v111.html?s=1
The archives of the W580 firmware are these:
http://www.4shared.com/file/63000837/1d270...access.html?s=1

Themes (files. Thm):
http://brunowsl.diinoweb.com/files/S...580/Themas.zip

IFS_TPA package:
http://www.4shared.com/file/51706922/54ead0e0/IFS_TPA.html

USB Flash Drive:
http://www.4shared.com/file/26668573/3c218...-setup.html?s=1

Making a backup of your machine:
First remove the battery and chip and the memory card from your phone. Leave the machine turned off and not even put the battery yet.
Unpack the USB flash drive and run the installer.

1. Open Setool2lite and select the model W580.

2. Place the battery in the unit and the unit still shut down click "READY GDFS" and connect the device by pressing "C". Be careful, if you click on "Write GDFS" his unit in an ressucitar will only technical assistance.

Once this is done again remove the battery from the device and no place yet.


Starting the tutorial:
1. Open Setool2lite and select the model W580.

2. The button "Add" add the 2 files of the firmware MAIN and FS already unpacked.

3. In "MISC files" add the package IFS_TPA. (Do not unzip the file ifs_tpa)

4. Put the battery from the unit and click "Flash". Connect the device by pressing "C".
Note: After you connect the unit by pressing "C" and Setool2lite recognize the device can release the button, does not need to be more pressing.

In this part the Setool2lite going to do a reading of the apparatus and archives and will stop in a message asking for you remove the cable and battery from the device, do so and put the battery again, then connect the cable and click "READY".

There is now only expected to finish the process. For over whether a message will appear as "time elapsed". You can unplug the cable, put the chip and the memory card and connect your device.

Finalizing
Remember when I said I did not put the subjects (files. Thm) in the package?
Well, now you will add them to your unit. Unzip the file of the issues, there will be 3 themes that should be placed in the "Themes" from the memory card or the phone's internal memory.


Ready now you have a device with Flash and Configurator what needs to better

Nice tut and with a mini mod pack as well

Though I feel it could use a link to myphone explorer: here

But I am a little confused: I thought you had to bypass db2020 security to flash? But then, I dont have a db2020 so I wouldnt fully know

To flash dont need.
Only to apply patches.

Ah ok