Hi all, I need help with debranding my SEW880i. Using SEtool2Lite, i ran the identify feature and this is what it came up with:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35159602740522 CERT:RED
FLASH CID:52 COLOR:RED
Model:W880i
Brand:O2
MAPP CXC article: R8BA024 prgCXC1250640_GENERIC_AI
MAPP CXC version: R8BA024
Language Package:EUROPE_2
CDA article: CDA102719/128
CDA version: R6A
Default article: cxc1250651
Default version: R8BA024
Network LOCKED
Operator: 234-10
Elapsed:39 secs.
What i need to know now is, using SEtool2Lite, What do i need to do. I will attach a screen shot of what i see. I need to know:
1. what boxes need to be checked
2. What i need to put in the files section
3. do i need to dl any firmware, Misc files or Restore files
4. and once everything is in order, what do i do, do i flash or unlock/repair e.t.c.
I have read the how to's which can be found on this site, but after the 1st few lines i get extremely confused and disureantabed (i know ive spelt that wrong lol).
Any help will be greatly apprieciated.
Thank You all
Full Version: Need Help Debranding SE W880i
QUOTE (junglist_masiv @ 2008-07-22 23:10) 
1. what boxes need to be checked
AFAIK, My phone is db2020 CID52, then I tick the bypass security... After that, add the wanted MAIN file in the files box.. I recommend you to use the GENERIC one to debrand it...
Apply quick access patch for quick patching in next time... In my experience, applying this patch need approximately 30 minutes.. Quick access patch could be created with qamaker.exe then put the .vkp on MISC files to apply it with clicking FLASH... (Put the MAIN and quick access patch together!!)
If you just apply some patches except the quick access one, uncheck bypass security and remove the MAIN file and change the quick access vkp in the MISC file box with your wanted patch in the MISC files and click WRITE SCRIPT don't click WRITE GDFS or it'll kill your phone
QUOTE (junglist_masiv @ 2008-07-22 23:10)
2. What i need to put in the files section
MAIN file box: put your wanted firmware to FLASH it..
MISC file box: put your wanted patch here... And WRITE SCRIPT
QUOTE (junglist_masiv @ 2008-07-22 23:10)
3. do i need to dl any firmware, Misc files or Restore files
Firmware: download from TopSony, iprotebe, rapidshare, ziddu and much moreMISC: including patches... Seek out at selife.ru, iprotebe, topSony.ru, and much more
RESTORE: first back up your GDFS to restore it if flashing goes wrong... For backing up your current-used FS files, use SEFP+FAR and
also SESC 1.1... Otherwise, you could extract the original .fbn with MAIN2RAW without any user changes
QUOTE (junglist_masiv @ 2008-07-22 23:10)
4. and once everything is in order, what do i do, do i flash or unlock/repair e.t.c.
For unlock, use unlocking patch... Also firstly, FLASH it with the GENERIC MAIN....
CMIIW
CMIIW
CMIIW
CMIIW
QUOTE (katrokndeso @ 2008-07-23 12:10)
qamaker.exe:
where can i get it, Once ive opened it to all networks i will not want to do it again, so do i need to bother with this?
MISC file box: put your wanted patch here... And WRITE SCRIPT Firmware:
Do i need to use a patch aswell if iam just debranding it?
RESTORE: first back up your GDFS to restore it if flashing goes wrong... For backing up your current-used FS files, use SEFP+FAR and
also SESC 1.1WHAT ARE THESE?, AND WHERE CAN I GET THEM... Otherwise, you could extract the original .fbn with MAIN2RAW without any user changes is there anyway to take these directly off the phone so i dont have any problems
For unlock, use unlocking patch WHATS THIS I.E. WHERE WOULD I FIND IT, WHATS IT CALLED... Also firstly, FLASH it with the GENERIC MAIN....
could i have ur instant messenging address as it will be easier to communicate?
Sorry about the caps for the questions i just wanted them to stand out.
Oh and thank you very much for ur help
where can i get it, Once ive opened it to all networks i will not want to do it again, so do i need to bother with this?
MISC file box: put your wanted patch here... And WRITE SCRIPT Firmware:
Do i need to use a patch aswell if iam just debranding it?
RESTORE: first back up your GDFS to restore it if flashing goes wrong... For backing up your current-used FS files, use SEFP+FAR and
also SESC 1.1WHAT ARE THESE?, AND WHERE CAN I GET THEM... Otherwise, you could extract the original .fbn with MAIN2RAW without any user changes is there anyway to take these directly off the phone so i dont have any problems
For unlock, use unlocking patch WHATS THIS I.E. WHERE WOULD I FIND IT, WHATS IT CALLED... Also firstly, FLASH it with the GENERIC MAIN....
could i have ur instant messenging address as it will be easier to communicate?
Sorry about the caps for the questions i just wanted them to stand out.
Oh and thank you very much for ur help
dear friend,
maybe you should read the topic on setoolite v1.11 flashing/patching more and more.it is a very clear tuto.
BR
maybe you should read the topic on setoolite v1.11 flashing/patching more and more.it is a very clear tuto.
BR
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.