SE-NSE Forums > Please Help My Phone Died

SE-NSE Forums > SE Firmware > Newbie Forum

ragis

2008-06-30 08:27

Hello all this is my first topic!
I have a problem with my k310,it was flashed to w200 and i didn't made a backup of GDFS.Yesterday i suddenly change my GDFS with another from vodafone k310 who was flashed to w200 too.And it gave me errors here is the Log File

CODE

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 1404 variables
unit 1/3CA write fail, err: 11
cut length from 1637(03/0FDD)
unit 3/FDD write fail, err: 11
cut length from 2035(03/13C3)
unit 3/13C3 write fail, err: 11
cut length from 1635(03/13CA)
unit 3/13CA write fail, err: 11
cut length from 1635(04/17AF)
unit 4/17AF write fail, err: 11
cut length from 5950(04/1B94)
unit 4/1B94 write fail, err: 11
cut length from 4760(05/1F5B)
unit 5/1F5B write fail, err: 11
cut length from 5950(06/2747)
unit 6/2747 write fail, err: 11
done
Phone detached
Elapsed:91 secs.

When i turned on the phone is said that the SIM is wrong and i flashed it again to w200 r4ja011 and then the phone said when i turned on it again Please Wait and it only load 1/3 of the line.I tried to write k310 GDFS i fond in 4shared but also errors.So please tell me what to do.Greetings and sorry for my bad english!

steadyontherem8

2008-06-30 20:44

Try K310 firmware but I think you have a bad GDFS problem so it probably won't help.

ragis

2008-06-30 21:01

i tried but it freeze at please wait too

Ciggy

2008-06-30 22:23

GDFS, IMEI ,mismatch. why'd you flash someone else's GDFS to your phone? try reading next time before doing stuff like that. try to get this:

CODE

;W810 R4EA031
;disable OTP<>GDFS check "Please Wait" problem
;(c) alexsam
+44140000
1091ADB: D0 E0

and this, ported for your firmware and your phone should work (i'm not guaranteeing because i never had to use this patch):

CODE

;W810 SW-R4EA031
;Use Phone without finalisation,REMOVE OTP <-> GDFS checking, Please Wait problem
;,Remove SIM-Lock
;©GVELF aka Kaa,-=Masoud57=-,IronMaster
;(p) Joker777 (Use Phone without finalisation)
44FCB6BE: 08D1 C046
451D1A9E: 8AB0041C 012070BD
44E52918: 70B5041CF1F2C4F900230022011C1C20 F0B505213A22D1F71FFD0020F0BDC046

ragis

2008-07-01 06:40

no it didn't help

Ciggy

2008-07-01 16:25

what you mean it didn't help? did you port it to your firmware and patch your phone with it?

ragis

2008-07-01 16:43

this patch is for w810 my phone i k310 how it is suppose to work ?

thugz mafia

2008-07-01 16:49

he said to port it!!

Ciggy

2008-07-01 18:47

ok so i tried a quick thing to see if i could help you out. i couldn't port the second patch the simple way because there's no value of 70B5041CF1F2C4F900230022011C1C20 in K310 firmware. by the way, it's for R4EA031 Main Generic. what is the K310's base address? i have found out offset and everything, just need to insert the base address and then i'll give you the patch.

ragis

2008-07-01 21:30

you want my IMEI or what ?

Ciggy

2008-07-02 06:17

QUOTE (ragis @ 2008-07-01 17:22)

you want my IMEI or what ?

nope. never give out your IMEI, ok. i need the base address of the K310's main

bitdomo

2008-07-02 06:58

It's 44140000

Ciggy

2008-07-02 14:50

QUOTE (bitdomo @ 2008-07-02 02:50)

It's 44140000

you sure? well, one of these two patches is the working version to the first patch i posted up.

CODE

;K310 R4EA031
;disable OTP<>GDFS check "Please Wait" problem
;(c) alexsam
;(p) Ciggy
+44140000
E85B8B: D0 E0

CODE

;K310 R4EA031
;disable OTP<>GDFS check "Please Wait" problem
;(c) alexsam
;(p) Ciggy
+44140000
73D593: D0 E0

ragis

2008-07-02 16:18

i write the scripts with setool but it still freezing at Please Wait,or i do it wrong ?

ragis

2008-07-02 16:23

and with what firmware i should flash it ?

ragis

2008-07-02 16:25

sorry for double post

Ciggy

2008-07-02 17:21

use K310 R4EA031 Main Generic as your main firmware because i tried porting the patch for that main. in setool2 lite, select your phone model, place the .vkp file in the Misc files box and click write script

ragis

2008-07-02 22:27

it still the same Please Wait

Ciggy

2008-07-02 23:29

well i don't know. maybe the 2nd patch will work but it's has to be ported with IDA and i really haven't gotten the hang of IDA yet. sorry

Kolle

2008-07-03 06:33

i´ve got the same problem with freezing screen at start up with my k510.... i tried the patch, too. didn´t work....

ragis

2008-07-03 08:39

i will try with other things and if it work i will post the result

philzfog

2008-07-03 08:43

is ur gdfs not working ?

ragis

2008-07-03 09:10

i think yes but now i can't turn it on,can't flash with custimization and main, fs and i think the fone is dead

CODE

philzfog

2008-07-03 09:19

pm me ur msn and i will try to help bud

Ciggy

2008-07-03 12:45

QUOTE (philzfog @ 2008-07-03 05:11)

pm me ur msn and i will try to help bud

he has please wait problem. he flashed his DB2010 phone with someone else's GDFS... why? i don't know.

ragis

2008-07-05 08:20

my phone is still dead with that please wait what should i do ?

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.