Full Version: Need Step2Step Guide for W800 Elfspack Installation.
Hello, I tried to install elf pack for my w800, but i run it unsuccessfuly. First i created 3 folders in "Other" folder: "ZBin","Config" in phone memory and "Daemons" in card memory. Then i uploaded DYN_CONST.BIN file into Config folder, next i patched my MAIN with ElfPack.vkp and w800_bd001.lib.vkp with GSlide. When i flashed my w800 with new MAIN, it keeps restarting at start screen. What i did wrong? Can somebody tell how to install Elfpack in step2step? Thanks.
w800_bd001.lib.vkp is the problem
QUOTE (nick14 @ 2008-06-07 13:22) 
w800_bd001.lib.vkp is the problem
That means, i don`t need to patch my MAIN with that patch?
EDIT: I tried to patch with ElfPack.vkp only, but got the same problem.
patchin with GSlide is the problem.. use far manager for cid36 w800. use setool v1.08 for cid49..
QUOTE (hypnotix @ 2008-06-07 15:38)
patchin with GSlide is the problem.. use far manager for cid36 w800. use setool v1.08 for cid49..
I tried to patch with SeTools v1.10 and after patching my phone didn`t switch on.
here is info from log file:
CODE
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
Elapsed:0 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701000508 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\1\Desktop\elfs\setool2lite\rest\R1BD001_CXC1250092_EU_1_CA"
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Done
Phone is detached.
Elapsed:63 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701000508 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\1\Desktop\elfs\setool2lite\rest\R1BD001_CXC1250092_EU_1_CA"
Starting to process VKP patch script: C:\Documents and Settings\1\Desktop\elfs\w800_r1bd001\ElfPack_v10.vkp
VKP script loaded OK. Lines: 379
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44AC0000
New block #0001 added: $44060000
New block #0002 added: $44280000
New block #0003 added: $448E0000
New block #0004 added: $45040000
New block #0005 added: $450E0000
New block #0006 added: $44520000
New block #0007 added: $451E0000
New block #0008 added: $45200000
Blocks selected OK. Reading blocks: 9
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
Block 3 written
Block 4 written
Block 5 written
Block 6 written
block already patched, skipping.
block already patched, skipping.
VKP script executed OK
Elapsed:102 secs.
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
Elapsed:0 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701000508 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\1\Desktop\elfs\setool2lite\rest\R1BD001_CXC1250092_EU_1_CA"
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Done
Phone is detached.
Elapsed:63 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701000508 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\1\Desktop\elfs\setool2lite\rest\R1BD001_CXC1250092_EU_1_CA"
Starting to process VKP patch script: C:\Documents and Settings\1\Desktop\elfs\w800_r1bd001\ElfPack_v10.vkp
VKP script loaded OK. Lines: 379
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44AC0000
New block #0001 added: $44060000
New block #0002 added: $44280000
New block #0003 added: $448E0000
New block #0004 added: $45040000
New block #0005 added: $450E0000
New block #0006 added: $44520000
New block #0007 added: $451E0000
New block #0008 added: $45200000
Blocks selected OK. Reading blocks: 9
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
Block 3 written
Block 4 written
Block 5 written
Block 6 written
block already patched, skipping.
block already patched, skipping.
VKP script executed OK
Elapsed:102 secs.
get an updated lib from here:
http://perk11.info/svn/SE/Library/
and install it!
check this is if ur still confused:
http://forums.se-nse.net/index.php?showtopic=28983
http://perk11.info/svn/SE/Library/
and install it!
check this is if ur still confused:
http://forums.se-nse.net/index.php?showtopic=28983
I think that my problem is REST file. It seems that i don`t have REST file for my firmware.
i used JDFlasher:
i used JDFlasher:
CODE
log started. plugin compiled Dec 31 2007 / 18:39:11
create session object
used script: w800.xml
turn off the phone, hold "c" button and plug usb cable
found EPIUSB2
connecting...
got response
protocol: 0301 baseband: 8040
cid detect
<- cid=49 color=red platform=db2010
qhldr: 061113 1250 COMPACTPRODUCTION_ID_LOADER P3L.2010_0_BLUE
<- hello: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
cmd3c: 060718 0842 DB2010_FLASHLOADER_R2A003.2010_49_RED
<- hello: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
activateloader
flashID: 890D (Manufacturer: Intel)
<- OTP: status 0 locked 1 cid 49 cert 1 IMEI 35255701xxxxxx
calculating hash
flashing babe: 4402_p3k.boot
flashing 2 blocks
2 blocks flashed ok
turn off the phone, hold "c" button and plug usb cable
found EPIUSB2
connecting...
got response
protocol: 0301 baseband: 8040
qhtry: 2010_header_p3l
run flashed loader
<- hello: 060718 1026 NP...COMPACTPRODUCTION_ID_LOADER P3K, den_po
cmd3c: 2010_f_p5g
<- hello: 060305 1000 104_DB2010_FLASHLOADER_P5G..., den_po
activateloader
reading 18 blocks
making a patched babe
flashing babe: ElfPack_v10.vkp
flashing 18 blocks
18 blocks flashed ok
reading 2 blocks
making a patched babe
flashing babe: w800_r1bd001.lib.vkp
flashing 2 blocks
2 blocks flashed ok
retrieving a fw version
time elapsed 1047
found: prgCXC1250092_EU_1_CA_R1BD001
error: SetDirectory(setdir(rest2010_49(can't find prgCXC1250092_EU_1_CA_R1BD001.rest)))
create session object
used script: w800.xml
turn off the phone, hold "c" button and plug usb cable
found EPIUSB2
connecting...
got response
protocol: 0301 baseband: 8040
cid detect
<- cid=49 color=red platform=db2010
qhldr: 061113 1250 COMPACTPRODUCTION_ID_LOADER P3L.2010_0_BLUE
<- hello: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
cmd3c: 060718 0842 DB2010_FLASHLOADER_R2A003.2010_49_RED
<- hello: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
activateloader
flashID: 890D (Manufacturer: Intel)
<- OTP: status 0 locked 1 cid 49 cert 1 IMEI 35255701xxxxxx
calculating hash
flashing babe: 4402_p3k.boot
flashing 2 blocks
2 blocks flashed ok
turn off the phone, hold "c" button and plug usb cable
found EPIUSB2
connecting...
got response
protocol: 0301 baseband: 8040
qhtry: 2010_header_p3l
run flashed loader
<- hello: 060718 1026 NP...COMPACTPRODUCTION_ID_LOADER P3K, den_po
cmd3c: 2010_f_p5g
<- hello: 060305 1000 104_DB2010_FLASHLOADER_P5G..., den_po
activateloader
reading 18 blocks
making a patched babe
flashing babe: ElfPack_v10.vkp
flashing 18 blocks
18 blocks flashed ok
reading 2 blocks
making a patched babe
flashing babe: w800_r1bd001.lib.vkp
flashing 2 blocks
2 blocks flashed ok
retrieving a fw version
time elapsed 1047
found: prgCXC1250092_EU_1_CA_R1BD001
error: SetDirectory(setdir(rest2010_49(can't find prgCXC1250092_EU_1_CA_R1BD001.rest)))
just use setool to patch!!
QUOTE (thugz mafia @ 2008-06-07 20:43)
just use setool to patch!!
QUOTE (cesedy2 @ 2008-06-07 15:39)
I tried to patch with SeTools v1.10 and after patching my phone didn`t switch on.
And i did everything by your tutorial. I don`t know why i can`t get it working
i think theres a prob with ur setool rest file...download another setool from somewhere!!!
QUOTE (thugz mafia @ 2008-06-07 20:51)
i think theres a prob with ur setool rest file...download another setool from somewhere!!!
I downloaded SeTool v1.08 and again I got this message:
CODE
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701000508 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\1\Desktop\New Folder (4)\setool2lite_v1.08\rest\R1BD001_CXC1250092_EU_1_CA"
Starting to process VKP patch script: C:\Documents and Settings\1\Desktop\New Folder (4)\w800_r1bd001\ElfPack_v10.vkp
VKP script loaded OK. Lines: 379
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44AC0000
New block #0001 added: $44060000
New block #0002 added: $44280000
New block #0003 added: $448E0000
New block #0004 added: $45040000
New block #0005 added: $450E0000
New block #0006 added: $44520000
New block #0007 added: $451E0000
New block #0008 added: $45200000
Blocks selected OK. Reading blocks: 9
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
Block 3 written
Block 4 written
Block 5 written
Block 6 written
block already patched, skipping.
block already patched, skipping.
VKP script executed OK
Elapsed:84 secs.
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701000508 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\1\Desktop\New Folder (4)\setool2lite_v1.08\rest\R1BD001_CXC1250092_EU_1_CA"
Starting to process VKP patch script: C:\Documents and Settings\1\Desktop\New Folder (4)\w800_r1bd001\ElfPack_v10.vkp
VKP script loaded OK. Lines: 379
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44AC0000
New block #0001 added: $44060000
New block #0002 added: $44280000
New block #0003 added: $448E0000
New block #0004 added: $45040000
New block #0005 added: $450E0000
New block #0006 added: $44520000
New block #0007 added: $451E0000
New block #0008 added: $45200000
Blocks selected OK. Reading blocks: 9
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
Block 3 written
Block 4 written
Block 5 written
Block 6 written
block already patched, skipping.
block already patched, skipping.
VKP script executed OK
Elapsed:84 secs.
Search for v1.11.
QUOTE (steadyontherem8 @ 2008-06-07 21:02)
Search for v1.11.
the same. How can i make REST file for SeTool?
EDIT: I`ve downloaded rest_w800_r1bd001.bin, but SeTool uses other file format.
EDIT2: OK, got it working
found a REST file for SeTools. I attached it so other w800 users can easely find it
QUOTE (cesedy2 @ 2008-06-08 02:43)
the same. How can i make REST file for SeTool?
EDIT: I`ve downloaded rest_w800_r1bd001.bin, but SeTool uses other file format.
EDIT2: OK, got it working found a REST file for SeTools. I attached it so other w800 users can easely find it
EDIT: I`ve downloaded rest_w800_r1bd001.bin, but SeTool uses other file format.
EDIT2: OK, got it working
found a REST file for SeTools. I attached it so other w800 users can easely find it THANKS MAN... I have been searching for it...
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.