SE-NSE Forums > W810i Problem! Need Help!

SE-NSE Forums > SE Firmware > Newbie Forum

isme

2008-05-23 02:10

Hi guys,

I've been searched around the forum and google for my problem but coundn't find the right solution to solve it. So i'm creating new thread here to see if I can get any help to get the phone back working. All the helps are much appreciated! Thank You!

Here comes the problem; I tried to put some patches to my phone via setool2lite and I accidently hit the "Write GDFS" button instead of "Write SCRIPT".

Here's the log of that process

CODE

welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.01
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906400xxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
Setting up GDFS...
format gdfs complete.
will write 825775931 variables
cut length from 877800791(30/5320)
FAIL: gdfs blk/unit:48/5320
Exception in GDFS write. maybe bad gdfs file.
Elapsed:39 secs.

and here's another log from XS++ after that happened

CODE

I tried to turn the phone on but it won't turn on. Whenever I hit the power button, it show the SE Logo and the white screen blinking. Then I searched and tried so many different method which I couldn't remember and now when I go to XS++, the log looks like this

CODE

now everytime I try to turn on the phone, it stuck at the "please wait" screen forever!

So my question is, can my phone be fixed or is it dead for good?
If yes, then what do I have to do to bring it back?

Thank you very much!

Oh, and by the way, this is my originally working log before I've done anything to it

CODE

Thanks again guys!

steadyontherem8

2008-05-23 09:28

Try flashing your backed up GDFS.

eyeyousee

2008-05-23 10:51

yeah that's the only thing you can do! Flashing your own backup GDFS!

isme

2008-05-23 16:07

i don't have backup GDFS! are there any other ways to fix this?

Thanks

nknwn666

2008-05-23 18:27

why dont u ppl make backups???
i think only service cable will work

steadyontherem8

2008-05-23 18:31

http://forums.se-nse.net/index.php?showtopic=27466

Read posts below the db2020 guide and decide if you are going to do it.

nknwn666

2008-05-23 19:48

u should try!!! read the topic that steadyontherem8 posted

isme

2008-05-23 20:16

QUOTE (philzfog @ 2008-04-19 17:28)

the tut i posted at the top is for db 2020 phone tryed and tested and it works on db2020 phones

will that tutorial work with db 2010? because mine is w810 db2010.

Thanks

nknwn666

2008-05-23 20:19

QUOTE (isme @ 2008-05-23 23:08)

will that tutorial work with db 2010? because mine is w810 db2010.

Thanks

read all the topic,its small, they say it works,but not wat they say about db2020,read after that

isme

2008-05-23 20:24

QUOTE (renzox @ 2008-04-17 09:51)

you can do it in a db2010 cid 49 like w700 / w810 / w300 / z550 / k310 with no problems, tested already, you only need a gdfs i bin fogormat and the correct skiwant otp patch did you have those?

B.R

will this GDFS from iProTebe work?? http://www.iprotebe.cz/download-w810_gdfs.rar-f261248.html

WizaJ

2008-05-23 21:17

I really don't understand why people don't make GDFS backups. It's the most basic of basics

QUOTE

Now, lets say you didn't back up the phones GDFS and did something to screw it up. Then you have a problem, because rewriting it with another phones GDFS will screw the security units and the phone will be bricked. Generally a bad thing, right ?.

Don't try to write a GDFS for another phone, ever. But in this case I quote below

QUOTE

Hopefully, you will not have to read this section. But, if you have have managed to corrupt your GDFS, and do not have a back-up... this should fix the problem. Hopefully you already have SETool2 Lite... if not, download that and Clean_W810_GDFS.rar from my eSnips folder. Now, follow these steps:

1. In SETool2 Lite, add the GDFS file (extract from the .rar file!) into the MISC. Box.
2. Press Write GDFS, and then connect your phone like explained above in the patching section.
3. SETool2 Lite will write the GDFS file to your phone.
4. After that, disconnect from SETool2 Lite. Then, you will press the Repair/Unlock button in SETool2 Lite, and connect your phone.
5. Unlocking the GDFS file will enable it to work on your phone =D Hopefully your phone is now working (might require a new MAIN, FS, and Custompack flash)

THIS IS ONLY TO BE DONE IN A LAST-DITCH ATTEMPT TO MAKE YOUR PHONE WORK!!! ALWAYS TRY ALTERNATIVE METHODS OF FIXING THE PHONE!

This method only applies to W810 CID 49 RED, and I hope your is, if so click here
And don't blame me if it doesn't work because I've never tried it

and someone is having a similar problem here
There's mention of need of a service cable
EDIT: URL change, soooo sleepy

isme

2008-05-23 21:59

QUOTE (wizaj @ 2008-05-23 16:09)

I really don't understand why people don't make GDFS backups. It's the most basic of basics

I never knew about the GDFS. If I know about it, then I would've had backed it up!

QUOTE (wizaj @ 2008-05-23 16:09)

Don't try to write a GDFS for another phone, ever. But in this case I quote below

This method only applies to W810 CID 49 RED, and I hope your is, if so click here
And don't blame me if it doesn't work because I've never tried it

and someone is having a similar problem here
There's mention of need of a service cable

QUOTE

Hopefully you already have SETool2 Lite... if not, download that and Clean_W810_GDFS.rar from my eSnips folder

I saw that tutorial but i can't find the Clean_W810_GDFS.rar file anywhere!

WizaJ

2008-05-23 22:20

Send a PM to

Wally_dog and he should have it

isme

2008-05-23 22:33

QUOTE (wizaj @ 2008-05-23 17:12)

Send a PM to

Wally_dog and he should have it

PM him yesterday. Still waiting for reply

WizaJ

2008-05-23 22:45

Don't worry, he usually comes online during weekend. He's busy with a Cambodian Culture project during the week I believe

nknwn666

2008-05-24 05:21

dont u need a patch? i saw the patch in that topic

milutin123

2008-05-24 14:38

I have made GDFS backup when I started 2 do things to my phone and it doesn't work at all!I have tried with se tool 2 make it, it screwed my phone, than I managed 2 make one with XS++ but when it comes 2 applying it just won't work!Cheers

isme

2008-05-29 18:24

problem solved! i followed this guide here http://forums.se-nse.net/index.php?showtopic=16310 and got the phone back working!

thanks for all the help guys!

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.