my w550i got WSOD before, so i try to upgrade my myself
i use XS++ to upgrade it without any problem, but the camera malfunction due to driver problem
so i try FAR to modify the driver
i flash SSW 5 block into my phone, then i unplug it and reinsert my battery
and try to connect the phone to FAR+SEFP.... but it didnt have response and show
"Unable to open device: EPIUSB"
i also try connect my phone to XS++ and SEtools2lite, but both program also didnt connect to my W550i
did my phone bricked?
thanks
follow is my XS++ log
QUOTE
00:27:12| XS++ v3.1 (Darwin) Ready !
00:27:12| Executed on Microsoft Windows XP
00:27:20|
00:27:20| Attempting to open the interface...
00:27:20|
00:27:20| TURN OFF PHONE!
00:27:20| Hold 'C' button on phone and connect phone NOW.
00:27:20| You have 30 seconds...
00:27:20|
00:27:27| Baseband ID: 8040
00:27:27| Protocol Version: 3.1
00:27:27|
00:27:27| Sending db2010_cid00_prodid_p3l.bin...
00:27:27| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
00:27:27| This is a PRODUCTION_ID loader
00:27:27| Activating GDFS...
00:27:27| Phone name detected!
00:27:27|
00:27:27| Profiling SEMC phone...
00:27:27| Platform: DB2010
00:27:27| OTP CID: 49
00:27:27| EROM CID: 49
00:27:27| EROM Color: Red
00:27:27| IMEI: xxxxxx
00:27:27| Phone ID: W550
00:27:27| Region: HONG_KONG
00:27:27| CDA: CDA102415/2 R4A
00:27:27| Firmware Version: R4BA041
00:27:27| EROM: n/a
00:27:27| Ready for operation!
00:27:47|
00:27:47| Sending db2010_cid49red_flash_r2b.bin...
00:27:48| Applet ID: 051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
00:27:48| This is a FLASH loader
00:27:48| Now flashing firmware main...
00:27:48| Flashing c:\documents and settings\benny\desktop\db2010cid49_3_2[1].rar\w550_r2e_dcu.49r.ssw
00:27:48| Header type: BABE
00:27:48| 5 flashblocks
00:27:50| Finishing flash
00:28:53| Sendinging shutdown signal to phone...
00:28:55| Shutting down...
00:27:12| Executed on Microsoft Windows XP
00:27:20|
00:27:20| Attempting to open the interface...
00:27:20|
00:27:20| TURN OFF PHONE!
00:27:20| Hold 'C' button on phone and connect phone NOW.
00:27:20| You have 30 seconds...
00:27:20|
00:27:27| Baseband ID: 8040
00:27:27| Protocol Version: 3.1
00:27:27|
00:27:27| Sending db2010_cid00_prodid_p3l.bin...
00:27:27| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
00:27:27| This is a PRODUCTION_ID loader
00:27:27| Activating GDFS...
00:27:27| Phone name detected!
00:27:27|
00:27:27| Profiling SEMC phone...
00:27:27| Platform: DB2010
00:27:27| OTP CID: 49
00:27:27| EROM CID: 49
00:27:27| EROM Color: Red
00:27:27| IMEI: xxxxxx
00:27:27| Phone ID: W550
00:27:27| Region: HONG_KONG
00:27:27| CDA: CDA102415/2 R4A
00:27:27| Firmware Version: R4BA041
00:27:27| EROM: n/a
00:27:27| Ready for operation!
00:27:47|
00:27:47| Sending db2010_cid49red_flash_r2b.bin...
00:27:48| Applet ID: 051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
00:27:48| This is a FLASH loader
00:27:48| Now flashing firmware main...
00:27:48| Flashing c:\documents and settings\benny\desktop\db2010cid49_3_2[1].rar\w550_r2e_dcu.49r.ssw
00:27:48| Header type: BABE
00:27:48| 5 flashblocks
00:27:50| Finishing flash
00:28:53| Sendinging shutdown signal to phone...
00:28:55| Shutting down...
After I flash SSW, i try to connect the phone by XS++ and SEtools2lite, XS++ shown the following log.
QUOTE
00:44:39| XS++ v3.1 (Darwin) Ready !
00:44:39| Executed on Microsoft Windows XP
00:44:50|
00:44:50| Attempting to open the interface...
00:44:50|
00:44:50| TURN OFF PHONE!
00:44:50| Hold 'C' button on phone and connect phone NOW.
00:44:50| You have 30 seconds...
00:44:50|
00:45:20| Error: Cannot open phone communication port
00:45:22| Disconnected... Unplug the phone
00:45:22|
00:44:39| Executed on Microsoft Windows XP
00:44:50|
00:44:50| Attempting to open the interface...
00:44:50|
00:44:50| TURN OFF PHONE!
00:44:50| Hold 'C' button on phone and connect phone NOW.
00:44:50| You have 30 seconds...
00:44:50|
00:45:20| Error: Cannot open phone communication port
00:45:22| Disconnected... Unplug the phone
00:45:22|