Full Version: Error in XS...
Hi guys...well i have a litle problem...i usually flashed my phone with XS++...well one day..when i go to put some new flash themes..when i go to connect my phone with XS++ it doesn't works!!!and say to me:"Did not receive 0x5a. Continuing" what can i do?plzz help!
Take out the battery for 1 min and it will work again ...
i done it and it didn't works...:-( it says an error...
Recharge your battery too.
well... first to recharge my batery and after that to take it of for 1 min.??and it's done?
Just try recharging your battery, and then plug in in XS++. If that doesn't help, take out your battery.
I had the same problem but when I removed the battery and inserted again,XS++ detected the phone and all worked fine for me.
Well i try many times to connect my w580i with XS but it doesn't wprks...i recharge my battery and then i take it of for 1 min. but nothing..it says to me Error..what can i do??
Paste the XS++ log.
reconnect to XS++ and try again....
Were to past the XS log man??
Well..for one more time i make a topic to help me with the problem i have..I have the sony ericsson w580i.I connect my phone with XS++ to put into some flash themes.One day...when i connect my phone it says to me error..and something else...why do this?I recharge my phone and i take of the battery for 1 min. but nothing..!!!plzz help me.
Spesificly:the error that apears in XS it says:'Binary acknowlege failed with: 15' and down of that it apears this:'Command: 'Error 0x15
Spesificly:the error that apears in XS it says:'Binary acknowlege failed with: 15' and down of that it apears this:'Command: 'Error 0x15
what do you mean when you say:PASTE THE XS LOG??
past it here so we can see it to
Open the .log file in notepad highlight the parts when you have connected the phone and up and to the error shows that way we can see whats going wrong mate.
When i connect my w580i it apears an error...!!that hapens the last 2 days...in past when i connect my phone it works!!but now..it dosn't and alwaysapears an error ...
Spesificly:it apears: Command: error 0x15
Spesificly:it apears: Command: error 0x15
WHICH error?
More spesificly when i start the FSX after a few seconds it apears: Command: Error 0x15. And down of that it apears: Binary acknowledge failed with: 15 I make an onother topic in the same section but nobody help me..the topic is in first page of this section with title: XS Problem!please Help Me.. and in this topic i explain my problem..! i hope this time to find someone to tell me what can i do to fix it and to do my job...thanks..
Hmm, I've seen a HUGE amount of memebers with the same problem, but no answers, and I personally don't have a w580...
So I can't say much..
So I can't say much..
I have merged your four, yes FOUR, topics about this problem into ONE.
Please do not make several topics asking the same question but continue to use the original one.
I have also placed it in the Firmware Newbie section as it seems to be a problem with XS++ rather than an issue with the themes you are trying to install.
Please do not make several topics asking the same question but continue to use the original one.
I have also placed it in the Firmware Newbie section as it seems to be a problem with XS++ rather than an issue with the themes you are trying to install.
this is the log file of XS++...please check it and tell me what is the problem..thanks..
15:51:50| XS++ v3.1 (Darwin) Ready !
15:51:50| Executed on Microsoft Windows XP
15:52:00|
15:52:00| Attempting to open the interface...
15:52:00|
15:52:00| TURN OFF PHONE!
15:52:00| Hold 'C' button on phone and connect phone NOW.
15:52:00| You have 30 seconds...
15:52:00|
15:52:05| Baseband ID: 9900
15:52:05| Protocol Version: 3.1
15:52:06| Phone name detected!
15:52:06|
15:52:06| Profiling SEMC phone...
15:52:06| Platform: DB2020
15:52:06| OTP CID: 51
15:52:06| EROM CID: 52
15:52:06| EROM Color: Red
15:52:06| IMEI: 35923501xxxxxx
15:52:06| Phone ID: W580
15:52:06| Region: MEDITERR
15:52:06| CDA: CDA102568/4 R8A
15:52:06| Firmware Version: R8BA024
15:52:06| EROM: R3A022
15:52:06| Ready for operation!
15:52:09| After making any changes with FSX
15:52:09| you must press the 'Shutdown' button
15:52:09|
15:52:09| Sending db2020_cid01_prodid_p3j.bin...
15:52:09| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
15:52:10| This is a PRODUCTION_ID loader
15:52:10|
15:52:10| Sending db2020_mem_patcher_cid52_r2a006.bin...
15:52:10| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
15:52:10| This is a MEM_PATCHER loader
15:52:10|
15:52:10| Sending db2020_red52_cs_r3a009.bin...
15:52:12| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
15:52:12| This is a CHIPSELECT loader
15:52:12| Activating loader...
15:52:12| Activating GDFS...
15:52:27| This loader is UNLOCKED
15:52:27| Success! CS-loader has been unlocked!
15:52:27| Please wait while XS builds a list of directories...
15:52:27| Activating filesystem
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:37| Binary acknowledge failed with: 15
15:52:37| Command: Error 0x15
15:52:47| Sendinging shutdown signal to phone...
15:52:47| Done.. You may now connect again...
15:52:47| Shutting down...
15:51:50| XS++ v3.1 (Darwin) Ready !
15:51:50| Executed on Microsoft Windows XP
15:52:00|
15:52:00| Attempting to open the interface...
15:52:00|
15:52:00| TURN OFF PHONE!
15:52:00| Hold 'C' button on phone and connect phone NOW.
15:52:00| You have 30 seconds...
15:52:00|
15:52:05| Baseband ID: 9900
15:52:05| Protocol Version: 3.1
15:52:06| Phone name detected!
15:52:06|
15:52:06| Profiling SEMC phone...
15:52:06| Platform: DB2020
15:52:06| OTP CID: 51
15:52:06| EROM CID: 52
15:52:06| EROM Color: Red
15:52:06| IMEI: 35923501xxxxxx
15:52:06| Phone ID: W580
15:52:06| Region: MEDITERR
15:52:06| CDA: CDA102568/4 R8A
15:52:06| Firmware Version: R8BA024
15:52:06| EROM: R3A022
15:52:06| Ready for operation!
15:52:09| After making any changes with FSX
15:52:09| you must press the 'Shutdown' button
15:52:09|
15:52:09| Sending db2020_cid01_prodid_p3j.bin...
15:52:09| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
15:52:10| This is a PRODUCTION_ID loader
15:52:10|
15:52:10| Sending db2020_mem_patcher_cid52_r2a006.bin...
15:52:10| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
15:52:10| This is a MEM_PATCHER loader
15:52:10|
15:52:10| Sending db2020_red52_cs_r3a009.bin...
15:52:12| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
15:52:12| This is a CHIPSELECT loader
15:52:12| Activating loader...
15:52:12| Activating GDFS...
15:52:27| This loader is UNLOCKED
15:52:27| Success! CS-loader has been unlocked!
15:52:27| Please wait while XS builds a list of directories...
15:52:27| Activating filesystem
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:34| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Command: Error 0x02
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:35| Binary acknowledge failed with: 15
15:52:35| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:36| Binary acknowledge failed with: 15
15:52:36| Command: Error 0x15
15:52:37| Binary acknowledge failed with: 15
15:52:37| Command: Error 0x15
15:52:47| Sendinging shutdown signal to phone...
15:52:47| Done.. You may now connect again...
15:52:47| Shutting down...
STOP CREATING MULTIPLE TOPICS ABOUT THE SAME THING!
So plzz just give me an answer...!i know that is anoing but i have e problem and i wan't to solve it!!it is so simple.
just flash your phone man.
i make a format to my phone and now it connects again with XS...that's good..
always make a backup of your gdfs first....
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.